Items where Subject is "Manufacturing Processes"

Article

Abhishek Krishna Sai, A. and Chandrasekaran, M. and Vinod Kumar, T. and Pugazhenthi, R. (2022) Study the enhanced mechanical properties of Al/B4C metal matrix composite. Materials Today: Proceedings, 68. pp. 1422-1428. ISSN 22147853

Anthoni Sagaya Selvan, R and Thakur, Dinesh G and Seeman, M and Muraliraja, R and Ansari, Mohd. Imran (2022) Modelling and optimisation of ENi-P-TiO2 coatings synthesised with Zwitterionic surfactant on naval grade AH36 Steel. Sādhanā, 47 (3). ISSN 0973-7677

Arunachalam, S. Jothi and Saravanan, R. and Sathish, T. and Parthiban, A. (2024) Effect of nano-particle weight percent on the flexural strength of Jute/kenaf/glass fiber composite using RSM. Interactions, 245 (1). ISSN 3005-0731

Babu, S. Senthil and Dhanasekaran, C. (2022) Comparative analysis of thrust force, roughness and roundness error in drilling of aluminium composites using RSM, ANN and fuzzy logic. Materials Today: Proceedings, 69. pp. 908-917. ISSN 22147853

Dhanasekaran, C. and Mohankumar, G. (2014) Hydrogen Gas in Diesel Engine Using DEE as Ignition Source. Applied Mechanics and Materials, 591. pp. 150-154. ISSN 1662-7482

Durai Murugan, P. and Vijayananth, S. and Natarajan, M.P. and Jayabalakrishnan, D. and Arul, K. and Jayaseelan, V. and Elanchezhian, J. (2022) A current state of metal additive manufacturing methods: A review. Materials Today: Proceedings, 59. pp. 1277-1283. ISSN 22147853

Giri, Jayant and Sathish, T. and Sheikh, Taukeer and Sunheriya, Neeraj and Giri, Pallavi and Chadge, Rajkumar and Mahatme, Chetan and Parthiban, A. (2024) Automatic liver segmentation using U-Net deep learning architecture for additive manufacturing. Interactions, 245 (1). ISSN 3005-0731

Giri, Jayant and Sunheriya, Neeraj and Sathish, T. and Kadu, Yash and Chadge, Rajkumar and Giri, Pallavi and Parthiban, A. and Mahatme, Chetan (2024) Optimization of process parameters to improve mechanical properties of fused deposition method using taguchi method. Interactions, 245 (1). ISSN 3005-0731

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer enhancement through nano-fluids and twisted tape insert with rectangular cut on its rib in a double pipe heat exchanger. Materials Today: Proceedings, 21. pp. 865-869. ISSN 22147853

Gurusamy, P. and Muthuraman, V. and Lokeshkumar, J. and Hari Krishna Raj, S. (2022) Fabrication and Mechanical Behaviour of Al-6061/Al2O3 Metal Matrix Composite Fabricated Through Powder Metallurgy Technique. International Journal of Vehicle Structures and Systems, 14 (1). ISSN 0975-3060

Jeevahan, Jeya and Chandrasekaran, M. and Britto Joseph, G. and Durairaj, R. B. and Mageshwaran, G. (2018) Superhydrophobic surfaces: a review on fundamentals, applications, and challenges. Journal of Coatings Technology and Research, 15 (2). pp. 231-250. ISSN 1547-0091

Jeevahan, Jeya and Chandrasekaran, Manoharan (2020) Influence of Nanocellulose Additive on the Film Properties of Native Rice Starch-based Edible Films for Food Packaging. Recent Patents on Nanotechnology, 13 (3). pp. 222-233. ISSN 18722105

K. V, SABARISH and BASKAR, J. and PAUL, PRATHEEBA (2019) OVERVIEW ON L9 TAGUCHI OPTIMIZATIONAL METHOD. INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING & TECHNOLOGY, 10 (2). ISSN 0976-6480

Karunakaran, K and Chandrasekaran, M (2017) Experimental Investigation Nano Particles Influence in NPMEDM to Machine Inconel 800 with Electrolyte Copper Electrode. IOP Conference Series: Materials Science and Engineering, 197. 012068. ISSN 1757-8981

Kishore, Gundugandla and Parthiban, A and Sivaram, A.R and Vijayan, V (2021) Experimental optimization of corrosion rate analysis for AA 5083 – Titanium Diboride (TiB2) composites. Materials Today: Proceedings, 37. pp. 3256-3261. ISSN 22147853

Krishnan, Pradeep Kumar and Christy, John Victor and Arunachalam, Ramanathan and Mourad, Abdel-Hamid I. and Muraliraja, Rajaraman and Al-Maharbi, Majid and Murali, Venkatraman and Chandra, Majumder Manik (2019) Production of aluminum alloy-based metal matrix composites using scrap aluminum alloy and waste materials: Influence on microstructure and mechanical properties. Journal of Alloys and Compounds, 784. pp. 1047-1061. ISSN 09258388

Kumar, Indradeep and Dhanasekaran, C. (2020) Behaviour Of Cottonseed Oil Blended With Single-Walled Carbon Nanotubes In, Direct Injection Single Cylinder Diesel Engine. Materials Today: Proceedings, 24. pp. 2157-2162. ISSN 22147853

Logesh, K. and Baskar, S. and Krithick Vignesh, R. and Jagadeesh, Mekala and Anand Ratna Kumar, Gantyada and Damodar Reddy, S. (2019) Performance Analysis Flow and Heat Transfer Characteristics of Secondary Refrigerant Based SiO2 Nanofluid. Materials Today: Proceedings, 18. pp. 4683-4689. ISSN 22147853

Madan, A.B. and Parthiban, A. and Singh, J. and Bhattu, M. (2024) Experimental investigation of mechanical and tribological properties of AA7065- B 4 C nano-composite. E3S Web of Conferences, 509. 01014. ISSN 2267-1242

Mamidi, Vamsi Krishna and Pugazhenthi, R. and Manikandan, G. and Kumar, M. Vinoth (2020) Mechanical and microscopic study on Tinospora cordifolia and Tectona grandis composites. Materials Today: Proceedings, 22. pp. 772-775. ISSN 22147853

Muraliraja, R. and Pradeepkumar, K. and Mohanraj, P. and Vinod Kumar, T. and Dhanasekaran, C. and Chandrasekaran, M. and Ragavanantham, S. and Shaisundaram, V. S. (2022) The Effects of Electroless Ni-P Coated SiC on the Properties of Magnesium Composite. Materials Performance and Characterization, 11 (1). p. 20210089. ISSN 23791365

Prakash, N. Ram and Gnanavel, C. (2024) Investigation of Quartz-Rich Granite Dust Particle-Reinforced Aluminized Glass–Kenaf Fiber-Reinforced Polyester Composite: Load Bearing, Water absorption and Flame Properties. Fibers and Polymers, 25 (9). pp. 3525-3537. ISSN 1229-9197

Prakash, P. and Dhanasekaran, C. (2022) Application of ANN, RSM on engine response prediction using lemongrass biomaterial blends. Materials Today: Proceedings, 69. pp. 684-688. ISSN 22147853

Pugazhenthi, R. and Sreeram, D. and Scaria, Clement Tom and Anbuchezhiyan, G. and Nanthakumar, P. (2021) Effect of process parameters on machining of Al -TiC metal matrix composites using RSM. Materials Today: Proceedings, 46. pp. 3282-3287. ISSN 22147853

Purohit, Abhilash and Dehury, Janaki and Sitani, Ayush and Pati, Pravat Ranjan and Giri, Jayant and Sathish, T. and Parthiban, A. (2024) A novel study on the stacking sequence and mechanical properties of Jute-Kevlar-Epoxy composites. Interactions, 245 (1). ISSN 3005-0731

Raj, J. Immanuel Durai and Durairaj, R. B. and Ananth, S. Vijay and Meenakshisundaram, Nagaraj (2024) Effect of e‐waste materials as filler in the flax woven fiber reinforced polymer composite for a sustainable environment. Environmental Quality Management, 33 (4). pp. 541-550. ISSN 1088-1913

Ramasubramanian, S. and Shai Sundram, V.S. and Karikalan, L. and Baskar, S. and Kumar Sahu, Sandip and Borkar, Dilip S. and Kumar, Prashant (2022) Experimental analysis of nano additive blended in Mahua oil biodiesel on engine characteristics. Materials Today: Proceedings, 63. pp. 535-541. ISSN 22147853

Ramnath, B. Vijaya and Chandrasekhar, Vishal and Elanchezhian, C. and Vinoth, L. Bruce Selva and Venkatraman, K. (2014) Value Stream Evaluation and Simulation to Improve Material Flow and Productivity. Applied Mechanics and Materials, 612. pp. 89-95. ISSN 1662-7482

Ramnath, B. Vijaya and Elanchezhian, C. and Nirmal, P. V. and Kumar, G. Prem and Kumar, V. Santhosh and Karthick, S. and Rajesh, S. and Suresh, K. (2014) Experimental investigation of mechanical behavior of Jute-Flax based glass fiber reinforced composite. Fibers and Polymers, 15 (6). pp. 1251-1262. ISSN 1229-9197

Ramya, G. and Chandrasekaran, M. (2013) Solving Job Shop Scheduling Problem Based on Employee Availability Constraint. Applied Mechanics and Materials, 376. pp. 197-206. ISSN 1662-7482

Sambandam, Padmanabhan and James Raj, Deepak and Thangaraj, Vinod Kumar and Muthiya, Solomon Jenoris and Subramanian, Mohankumar and Pachamuthu, Senthilkumar and Praveen Kumar, T (2024) Investigation of the environmental implications of using cerium oxide nano-additives in gasoline engines fueled with gasoline-oxyhydrogen. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 46 (1). pp. 75-94. ISSN 1556-7036

Santhanam, V. and Chandrasekaran, M. and Venkateshwaran, N. (2014) Effect of Fiber Parameters on the Mechanical Properties of Banana-Glass Fiber Hybrid Composites. Applied Mechanics and Materials, 592-59. pp. 202-205. ISSN 1662-7482

Saravanan, R. and Gnanavel, C. (2020) SPM is a right choice for improving quality and reliability and reduction of cost and manufacturing time – A case study. Materials Today: Proceedings, 21. pp. 993-999. ISSN 22147853

Saravanan, R. and Santhanam, M. and Nadarajan, S. and Pugazhenthi, R. (2015) Mechanical and Surface Morphological Investigation on Duplex Ageing Behaviour of Al (7075) Al–Zn–Mg–Cu Alloy. Journal of Advanced Microscopy Research, 10 (4). pp. 296-302. ISSN 21567573

Sathish, S and Kannan, M and Sathish Babu, R and Johnson Samuel, S (2021) EXPERIMENTAL ANALYSIS OF SINGLE REFLECTOR BOX TYPE SOLAR COOKER WITH THERMO FLUID. Journal of critical reviews, 7 (13). ISSN 23945125

SathishKumar, G. and Sridhar, R. and Sivabalan, S. and Pugazhenthi, R. (2022) Dynamic analysis of the natural fiber (Coir) reinforce polyester composite material with mechanical properties. Materials Today: Proceedings, 69. pp. 1292-1299. ISSN 22147853

Sebastian, Sanoop and Suyamburajan, VijayAnanth (2021) Microstructural analysis of diffusion bonding on copper stainless steel. Materials Today: Proceedings, 37. pp. 1706-1712. ISSN 22147853

Sivabalan, S. and Sridhar, R. and Parthiban, A. and Sathiskumar, G. (2021) Experimental investigations of mechanical behavior of friction stir welding on aluminium alloy 6063. Materials Today: Proceedings, 37. pp. 1678-1684. ISSN 22147853

Sivaganesan, S and Chandrasekaran, M and Ruban, M (2017) Impact of Various Compression Ratio on the Compression Ignition Engine with Diesel and Jatropha Biodiesel. IOP Conference Series: Materials Science and Engineering, 183. 012039. ISSN 1757-8981

Subramaniyan, R. and Kiruthika, N. and Somanathan, T. and Sriraman, V. and Shanmugam, M. (2018) High performance of Graphene oxide from Banana peel against Pseudomonas aeruginosa and Escherichia coli. Research Journal of Pharmacy and Technology, 11 (7). p. 2932. ISSN 0974-3618

Sunheriya, Neeraj and Giri, Jayant and Sathish, T. and Chadge, Rajkumar and Mahatme, Chetan and Parthiban, A. and Barmavatu, Praveen (2024) Evaluation of a helical coil heat exchanger in a forced convection environment. Interactions, 245 (1). ISSN 3005-0731

Udaiyakumar, Kuppuswamy Chockalingam and Chandrasekaran, M. (2015) An approach of a Lampyridae family (firefly) algorithm for optimisation of Bagchi's job shop scheduling problems. International Journal of Enterprise Network Management, 6 (4). p. 324. ISSN 1748-1252

Udayakumar, M. and Sivaganesan, S. and Sivamani, S. (2022) Process optimization of KOH catalyzed biodiesel production from crude sunflower-mahua oil. Biofuels, 13 (8). pp. 1031-1039. ISSN 1759-7269

Varunraj, S. and Ruban, M. (2022) Investigation of the microstructure and mechanical properties of AA6063 and AA7075 dissimilar aluminium alloys by friction stir welding process. Materials Today: Proceedings, 68. pp. 1654-1657. ISSN 22147853

Book Section

Ansari, Mohammad Omaish and Kumar, Rajeev and Pervez Ansari, Shahid and Abdel-wahab Hassan, Mohamed Shaaban and Alshahrie, Ahmed and Barakat, Mohamed Abou El-Fetough (2019) Nanocarbon aerogel composites. In: Nanocarbon and its Composites. Elsevier, pp. 1-26.

Conference or Workshop Item

Jeevahan, Jeya and Chandrasekaran, M. and Sethu, Akshay (2019) Influence of nanocellulose addition on the film properties of the bionanocomposite edible films prepared from maize, rice, wheat, and potato starches. In: PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS: ICAM 2019, 12–14 June 2019, Kerala, India.

Karunakaran, K. and Malladi, Avinash (2022) Design approach for metal additive manufacturing. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.

Thirupathy, Maridurai and Vadivel, Muthuraman and Subbiah, Thirugnanam and Pathinettampadian, Gurusamy (2024) Experimental Investigation of the Mechanical and Tribological Properties of Jute Fiber Composites with Nano-Sized Al2O3 Ceramic Particle Reinforcement. In: The International Conference on Processing and Performance of Materials (ICPPM 2023).