Items where Subject is "Heat Transfer"

A

A.R, Sivaram and R, Rajavel and Prakash, P. (2025) Experimental investigation of a vapour compression refrigeration system with TiO2 and Al2O3 nano lubricants. International Journal of Aquatic Research and Environmental Studies, 5 (2). pp. 219-233. ISSN 29807840

Arul Peter, A and Chandrasekaran, M. and Vinod Kumar, T. and Prakash, P. (2019) Emission Study on Spark Ignition Engine by Using Biogas Mix with Petrol. International Journal of Management, Technology And Engineering, 8. pp. 4484-4489. ISSN 2249-7455

Arumuganainar, K and Rajkumar, K and Darwins, A.K and Sivakumar, N and Sabu, M and Sivaram, A.R and Prakash, P. (2025) Next-Generation Waste Heat Recovery: Technologies for Sustainable Thermal Energy Management. In: Interdisciplinary Approaches to Science and Management for Innovative Development, 2025. SRR. ISBN 978-81-987134-5-2

Arunkumar, S. and Chandrasekaran, M. and Vinod Kumar, T. (2018) Analysis on Al6061 NI gr aphite composite using squeeze casting method. International Journal of Engineering & Technology, 7 (2). pp. 303-310. ISSN 2227-5258

Azarudeen, J. Mohammed and Anish, M. and Babu, L. Ganesh and Sivaram, A. R. and Punitha, N. and Muniyappan, Karthick and Giri, Jayant and Kanan, Mohammad and Jayaraman, Jayaprabakar and Baskar, S. (2025) Performance and emission characteristics of waste cooking oil biodiesel blends in sustainable fuel applications. Scientific Reports, 15 (1). ISSN 2045-2322

B

UNSPECIFIED1 and Baskar, S. Improving Heat Transfer Efficiency in Shell-and-Tube Heat Exchangers through the Incorporation of Alkaline Water Nanofluids. Nanotechnology Perceptions.

BALA KUMARAN, M and RAJAVEL, R and LEELA VINODHAN, V and SIVARAM, A. R. and Prakash, P. (2020) Experimental study of mini thermoelectric refrigerator. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (2). pp. 829-836. ISSN 2249–6890; 2249–8001

BALA KUMARAN, M and RAJAVEL, R and LEELA VINODHAN, V and SIVARAM, A. R. and Prakash, P. (2020) Experimental study of mini thermoelectric refrigerator. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (2). pp. 829-836. ISSN 2249–6890; 2249–8001

Baskar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Vivek, P. and Karikalan, L. (2020) Experimental studies on convective heat transfer coefficient of water/ethylene glycol-carbon nanotube nanofluids. International Journal of Ambient Energy, 41 (3). pp. 296-299. ISSN 0143-0750

Bupesh Raja, V. K. and Ramasubramanian, S. and Sonawwanay, Puskaraj D. and Palanikumar, K. and Reddy, Ajay Shivsharan and Nemade, Amit C. (2022) Increasing heat transfer in 4-stroke SI engine fins by nanocoating. International Journal of Ambient Energy, 43 (1). pp. 6763-6771. ISSN 0143-0750

C

Charles Godwin, R. and Dhanasekaran, C (2022) Experimental investigation of high carbon steel MMC for crown pinion gear. Materials Today: Proceedings, 69. pp. 901-907. ISSN 22147853

G

Gnanavel, C. and Ashraff Ali, K.S. and Gopalakrishnan, T. and Vijayananth, Suyamburajan (2023) PCM-based Heat Exchanger for Pasteurization Process. Imaginex Inks Publication, Chennai. ISBN 978-81-970654-8-4

Gnanavel, C. and Gopalakrishnan, T. and Sathish Kumar, G. and Venugopal, S (2025) EXPERIMENTAL AND COMPUTATIONAL STUDY ON BIOFUEL￾INDUCED CORROSION IN AUTOMOTIVE FUEL TANKS. In: International Conference on Innovations and Sustainability in Engineering, Management, Pharmacy and Education.

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer augmentation by nano-fluids and Spiral Spring insert in Double Tube Heat Exchanger – A numerical exploration. Materials Today: Proceedings, 21. pp. 857-861. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2021) Investigation of appropriateness of coated steel piston for aluminium alloy piston for small engines. International Journal of Ambient Energy, 41 (11). pp. 1293-1298. ISSN 0143-0750

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. and Jayakanth, J.J. (2016) Improvement of Productivity in TIG Welding Plant by Equipment Design in Orbit. International Conference on Emerging Trends in Engineering Research 2017. ISSN 1757-899X

Gopalakrishnan, T. and R, Udhayakumar and Pugazhenthi, R. and R, Manikandan and Kanan, Mohammad and Tank, Gaurang and Simon, Deepa (2025) Effects of thermal shock on mechanical properties and microstructural integrity of aluminum–SiC composites. AIP Advances, 15 (11). ISSN 2158-3226

Gopalakrishnan, T. and Venkatesan, Raja and Chandrasekaran, M. and Deepa, Simon and Kim, Seong-Cheol (2024) Advances in implant for surface modification to enhance the interfacial bonding of shape memory alloy wires in composite resins. Progress in Organic Coatings, 188. p. 108242. ISSN 03009440

Gopalakrishnan, T. and Vijayananth, S. and Gnanavel, C. and Ajith Arul Daniel, A. and Ashwin, R and Azhagesan, N (2025) Design and Analysis of a Euro-7 13-Litre Heavy Duty Engine Flywheel Housing under Static and Vibration Loads. International Journal of Emerging Science and Engineering, 14 (1). pp. 6-13. ISSN 23196378

Gunasekaran, N. and Manoj Kumar, P. and Raja, S. and Sharavanan, S. and Avinas, K. and Aakash Kannan, P. and Gokul, S. (2021) Investigation on ETC solar water heater using twisted tape inserts. Materials Today: Proceedings, 47. pp. 5011-5016. ISSN 22147853

Gurusamy, P. and Prabu, S. Balasivanandha and Nagasankar, P. and Muthuraman, V. and Mohanavel, V. (2021) Solidification behaviour of squeeze cast aluminium composites. Solidification behaviour of squeeze cast aluminium composites. 020028.

J

Jacob, S and Karikalan, L. (2021) Optimization of Combustion Characteristics of Diesel Engine Fueled by Biofuels and Its Diesel Blends with Additive Titanium Dioxide Nano-Particles. International Journal of Heat and Technology, 39 (6). pp. 1973-1978. ISSN 03928764

K

Kamalakannan, K. and Sivaganesan, S. and Dhanasekaran, C. and Pugazhenthi, R. (2022) A Study on the Mechanical Properties of Alkali Treated Natural Reinforced Fiber Composites. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 673-682.

Karikalan, L. and Baskar, S. (2023) Preparation, stability and thermophysical properties of nanofluid. In: ImmunFest - 2023.

Karikalan, L. and Chandrasekaran, M. (2016) Influence of turpentine addition in Jatropha biodiesel on CI engine performance, combustion and exhaust emissions. International Journal of Automotive Technology, 17 (4). pp. 697-702. ISSN 1229-9138

Karikalan, L. and Venugopal, S and Ramasubramanian, S. and Jacob, S (2019) Experimental Analysis of Performance and Pollutants of CI Engine using Jatropha Biodiesel with Exhaust Gas Recirculation. International Journal of Vehicle Structures and Systems, 11 (2). ISSN 0975-3060

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) Heat Transfer Amplification through Special Tube Inserts and Metallic Nanofluids in Heat Exchanger. International Journal of Vehicle Structures and Systems, 11 (4). ISSN 0975-3060

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) Numerical exploration of heat transfer in a heat exchanger tube with cone shape inserts and Al2O3 and CuO nanofluids. Materials Today: Proceedings, 21. pp. 940-947. ISSN 22147853

Kiruthika, N. S. and Thailambal, Dr. G. (2022) Dynamic Light Weight Recommendation System for Social Networking Analysis Using a Hybrid LSTM-SVM Classifier Algorithm. Optical Memory and Neural Networks, 31 (1). pp. 59-75. ISSN 1060-992X

Kulkarni, H. Ravi and Dhanasekaran, C and Rathnakumar, P. and Mohamed Iqbal, S. and Sivaganesan, S. (2022) Biosynthesized zinc nano fluid for helically coiled heat exchanger at constant heat flux. Materials Today: Proceedings, 58. pp. 104-113. ISSN 22147853

L

Loganathan, Karikalan and Manoharan, Chandrasekaran (2017) Evaluation of performance and emission features of Jatropha biodiesel -turpentine blend as green fuel. Thermal Science, 21 (1 Part). pp. 615-625. ISSN 0354-9836

Logesh, K. and Baskar, S. and Yuvan Siddarth, B. and Arun Sherwin, K. and Naresh, P. (2019) Multi-walled carbon nanotube mixed with isopropyl alcohol Nano fluid for heat transfer applications. Materials Today: Proceedings, 18. pp. 4690-4694. ISSN 22147853

M

Mahaviradhan, N. and Sivaganesan, S. (2021) Tribological analysis of hybrid aluminum matrix composites for high temperature applications. Materials Today: Proceedings, 39. pp. 669-675. ISSN 22147853

Maheshwaran, R. and Dhanasekaran, C. and Sivaganesan, S. and Pugazhenthi, R. (2022) Investigation of Mechanical Behavior of Biodegradable Natural Composite PLA Reinforced with Snake Grass Fiber and Sisal Fiber. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 165-173.

Mandal, Shyamapada and Santhi, B. and Sridhar, S. and Vinolia, K. and Swaminathan, P. (2019) Minor fault detection of thermocouple sensor in nuclear power plants using time series analysis. Annals of Nuclear Energy, 134. pp. 383-389. ISSN 03064549

Muthu, Raja and Sivanathan, Sivalakshmi and Thangavel, Balusamy and Murugan, Sudharshan and Gopalakrishnan, T. and Simon, Deepa (2026) Heat Transfer Studies on Sodium‐Based PCM‐Infused Mattress. Heat Transfer, 55 (2). pp. 1016-1026. ISSN 2688-4534

N

Nagarajan, Keerthana and Chelladurai, Mahisha Devi and Mani, Sivaranjini and Pavadai, Parasuraman and Theivendren, Panneerselvam and Palanisamy, Ponnusamy and Sankaranarayanan, Murugesan and Kunjiappan, Selvaraj (2025) Unlocking antidiabetic potential: Novel compounds from endophytic fungi isolated from Manihot esculenta Crantz tuberous roots. Journal of Molecular Structure, 1337. p. 142083. ISSN 00222860

O

Omkar A., Jarali and Rajesekaran, K and Amarnath, M and Prakash, P. (2025) Advanced Materials and Systems for Waste Heat Recovery. In: Interdisciplinary Approaches to Science and Management for Innovative Development, 2025. SRR. ISBN 978-81-987134-5-2

P

Padmanabhan, S. and Selvamuthukumar, M. and Ganesan, S. and Baskar, S. and Sharma, Abhishek (2022) Investigation of Heat Transfer Characteristics in Double Tube Heat Exchanger with Helical Turbulator Using CFD. In: Advancement in Materials, Manufacturing and Energy Engineering, Vol. II. Springer, pp. 531-541.

Prakash, P. and Dhanasekaran, C (2019) Experimental Investigation on Jatropha-Methanol Blends in Direct Injection Diesel Engines. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Prakash, P. and Dhanasekaran, C (2022) Influencing parameter optimisation of CRDI engine fuelled with lemongrass biodiesel blends. International Journal of Ambient Energy, 44 (1). pp. 719-738. ISSN 0143-0750

Prakash, P. and Dhanasekaran, C. (2022) Application of ANN, RSM on engine response prediction using lemongrass biomaterial blends. Materials Today: Proceedings, 69. pp. 684-688. ISSN 22147853

Prakash, P. and Dhanasekaran, C. (2026) Multi-objective optimization of CRDI engine parameters fueled with blends of diesel and sterculia foetida biodiesel: A comparative study of RSM composite desirability and meta-heuristic algorithm. Results in Engineering, 29. p. 109719. ISSN 25901230

Prakash, P. and Elumalai, P.V. and Chelladurai, Hariharan and Josephine, Golden Renjith Nimal Renjith and Velumayil, Ramesh and Asif, Mohammad and Kit, Chan Choon and Venkatesan, Balambica and Rajagopal, Sabarish and Baskar, S. and Reddy, M. Venkateswar and S, Prabhakar (2024) Parameter fine tuning on CRDI engine operated with blends of grape biodiesel and diesel. Case Studies in Thermal Engineering, 60: 104701. p. 104701. ISSN 2214157X

Prakash, P. and Parthiban, A. and Arul Peter, A and Arvind Kishor, T.S (2018) Comparative Analysis of Jatropha-Methanol Mixture and Diesel on Direct Injection Diesel Engine. International Journal of Pure and Applied Mathematics, 119 (16). pp. 4947-4961. ISSN 1314-3395

Prakash, P. and Parthiban, A. and Dhanasekaran, C. and Sivaganesan, S. (2018) CFD ANALYSIS OF CONCENTRIC CIRCULAR TUBE WITH INSERTS. International Journal of Management, Technology And Engineering, 8. pp. 4674-4682. ISSN 2249-7455

Prakash, P. and Parthiban, A. and Varunraj, S. (2018) Investigation on Heat Transfer and Thermal Conductivity Measurement in Lagged Pipe Apparatus. International Journal of Recent Trends in Engineering & Research, 04. ISSN 2455-1457

R

Raj, S. Hari Krishna and Boopathy, G. and Vijayananth, S. and Balaji, G. and Ramanan, N. (2024) Feasibility and Insights into the Optimization and Characterization of Friction Welded Aluminum–Steel Dissimilar Joints. In: Advances in Science, Technology & Innovation. Springer, pp. 121-129.

Ravi Kulkarni, H. and Dhanasekaran, C and Rathnakumar, P. and Geo Varuvel, Edwin and Sivaganesan, S. and Anantachar, M. (2022) Investigation on performance of bio synthesized copper nano fluid in helical coil and shell type heat exchanger. Materials Today: Proceedings, 52. pp. 862-866. ISSN 22147853

reddy, Lakshmikanth and M, Meena (2022) PERFORMANCE VALIDATION OF SPECTRUM SENSING USING KERNELIZED SUPPORT VECTOR MACHINE TRANSFORMATION. PERFORMANCE VALIDATION OF SPECTRUM SENSING USING KERNELIZED SUPPORT VECTOR MACHINE TRANSFORMATION. (Submitted)

S

Selvam, M. Amala Justus and Arunkumar, S. and Balambica, V. and Padmanabhan, S. and Vinod Kumar, T. and Shaisundaram, V S (2022) Influence of copper anodization on structural and heat transfer characteristic of aluminum piston. Materials Today: Proceedings, 59. pp. 1407-1413. ISSN 22147853

Shaisundaram, V S and Elumalai, P. V. and Padmanabhan, S. and Ramachandran, U. Nalini and Tripathi, Abhishek Kumar and Yaping, Cui and Goud, B. Nagaraj and Prabhakar, S. (2025) Impact of metal oxides on thermal response of zirconia coated diesel engines fueled by Momordica biodiesel machine learning insights. Scientific Reports, 15 (1). ISSN 2045-2322

Shaisundaram, V S and Kumaravel, P and Bharathiraja, G and Nagaraj, M (2025) Optimization of Oxygen Enrichment in a CI Engine using Tallow Oil Biodiesel: A Response Surface Methodology Approach. Global NEST Journal. ISSN 1790-7632

Shaisundaram, V S and Sengottaiyan, Saravanakumar and Aruna, R. and Muraliraja, R. (2026) Machine learning-based prediction and optimization of performance and emission characteristics in CI engines fueled by pumpkin seed biodiesel with thermal barrier coating and cerium oxide nanoparticles. Fuel, 414. p. 138434. ISSN 00162361

SivaChandran, S. and Venkatesh, R. and Baskar, S. and Arivazhagan, R. and Maridurai, T. (2022) Experimental study of shell and tube heat exchanger. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.

Sivaganesan, S. and Chandrasekaran, M. (2015) THE INFLUENCE OF THERMAL BARRIER COATING ON THE COMBUSTION AND EXHAUST EMISSION IN TURPENTINE OIL POWERED DI DIESEL ENGINE. ARPN Journal of Engineering and Applied Sciences, 10 (22). ISSN 1819-6608

Sivaganesan, S. and Chandrasekaran, M. (2016) Performance and Emission Analysis of Compression Ignition Engine with Methyl Ester of Jatropha and Diesel. Indian Journal of Science and Technology, 9 (26). ISSN 0974-6846

Sivaram, A.R and Prabhu, N and Ramanathan, P and Rajavel, R and Prakash, P. (2020) Investigation of Pongamia Pinnata with Nano Additives on Performance Characteristics of Diesel Engine. Test Engineering & Management, 83. pp. 14332-14338. ISSN 0193-4120

Sridhar, R. and Jeevahan, Jeya and Chandrasekaran, M. (2018) Effect of the addition of 1-pentanol on engine performance and emission characteristics of diesel and biodiesel fuelled single cylinder diesel engine. International Journal of Ambient Energy, 41 (1). pp. 58-63. ISSN 0143-0750

Subash, P. and Gurusamy, P. and Muthuraman, V. and Vijayan, S. (2026) Characterization study on mechanical, thermal conductivity and water absorption properties of silane-modified Plumbago zeylanica stem fiber and wheat straw extracted biosilica particle reinforced polyester composite. Polymer Bulletin, 83 (6). ISSN 0170-0839

Suyamburajan, Vijayananth and V, Jayaseelan and Ajith Arul Daniel, S. and Kumar, Nallapaneni Manoj (2019) High temperature superplasticity and its deformation mechanism of AA6063/SiC. Case Studies in Thermal Engineering, 14. p. 100479. ISSN 2214157X

T

Thirupathy, Maridurai and Muthuraman, V (2024) Effects of Tribology and Mechanical Properties on Silicon Carbide and Glass Fiber-Reinforced Hybrid Nanocomposites. The International Conference on Processing and Performance of Materials (ICPPM 2023). p. 46.

V

Vennimalai, M. and Shaisundaram, V S (2025) Influence of Al₂O₃ and CeO₂ Nanoparticle-Enriched Waste Cooking Oil Blends on Performance and Emissions of a CI Engine. MALAYSIAN JOURNAL OF CHEMISTRY, 27 (3). ISSN 15112292

Venugopal, S and Baskar, S. and Samuel, Pulipaka Neel Fordham (2023) Study on the mechanical behaviour of metal matrix composites (MMC). Materials Today: Proceedings. ISSN 22147853

Venugopal, S and Karikalan, L and Jacob, S and Shaisundaram, V.S. (2018) CFD Simulation and Analysis of Abrasive Fluid Jet Machining. International Journal of Advance Engineering and Research Development, 5 (3). ISSN 2348-6406

Vijayan, V. and Saravanan, S. and Godwin Antony, A. and Loganathan, M. and Baskar, S. (2019) HEAT TRANSFER ENHANCEMENT IN MINI COMPACT HEAT EXCHANGER BY USING ALUMINA NANOFLUID. International Journal of Mechanical Engineering and Technology (IJMET), 10 (1). ISSN 0976-6359

Vinod Kumar, T. and Kailasam, R and Chandrasekaran, M. and Vivek, P. and Arunkumar, S. (2019) EXPERIMENTAL INVESTIGATION OF DIESEL ENGINE USING GOBAR GAS BLENDS. International Journal of Management, Technology And Engineering, 8 (12). pp. 4542-4551. ISSN 2249-7455

Z

Zeeshan, Ali and Nagaral, Madeva and Sharath Chandra, S. H. and Faiyaz Ahmed, Ansari and Muthuraman, V and Dayanand, Samuel and Auradi, V (2024) Critical Review on 4D Printing. In: Developing Digital Inclusion Through Globalization and Digitalization. IGI Scientific Publishing, pp. 37-54.