Browse by Employee ID

Baskar, S. and Venugopal, S and Shaisundaram, V.S. and Jacob, S and Sathya Narayanan, M and Jeeva, R and Madhankumar, G (2025) Developing Thorium- Powered Commercial Transport Vehicle for Commercial Use. Imaginex Inks Publication. ISBN 978-81-98643858

Muraliraja, R. and Sudagar, J. and Elansezhian, R. and Raviprakash, A. V. and Dhinakaran, R. and Shaisundaram, V. S. and Chandrasekaran, M (2019) Estimation of Zwitterionic Surfactant Response in Electroless Composite Coating and Properties of Ni–P–CuO (Nano)Coating. Arabian Journal for Science and Engineering, 44 (2). pp. 821-828. ISSN 2193-567X

Shaisundaram, V S and Sengottaiyan, Saravanakumar and Mohan, Rajesh and Gurunathan, Vishnupriya (2025) Assessment of mechanical, thermal, and sliding wear performance of chemically treated alumina‐filled biocomposites using machine learning and response surface methodology. Polymer Composites, 2025 (1). pp. 1-19. ISSN 0272-8397

Sengottaiyan, Saravanakumar and Shaisundaram, V S and Shameer Basha, M. and Deepanraj, B. and Senthilkumar, N. (2025) Effect of duplex and austenite stainless steel fillers on mechanical, microstructural, and corrosion characteristics of dissimilar welds using Cold Metal Transfer welding. Results in Engineering, 26. p. 104818. ISSN 25901230

Vennimalai, M. and Shaisundaram, V S (2025) Influence of Al₂O₃ and CeO₂ Nanoparticle-Enriched Waste Cooking Oil Blends on Performance and Emissions of a CI Engine. MALAYSIAN JOURNAL OF CHEMISTRY, 27 (3). ISSN 15112292

Shaisundaram, V S and Elumalai, P. V. and Padmanabhan, S. and Ramachandran, U. Nalini and Tripathi, Abhishek Kumar and Yaping, Cui and Goud, B. Nagaraj and Prabhakar, S. (2025) Impact of metal oxides on thermal response of zirconia coated diesel engines fueled by Momordica biodiesel machine learning insights. Scientific Reports, 15 (1). ISSN 2045-2322

Shaisundaram, V S and Sengottaiyan, Saravanakumar and Raji, Gunasekaran and S., Kumaravel and Chandrasekaran, M. and Basumatary, Sanjay (2025) Machine Learning‐Driven Energy Efficiency Enhancement and Emission Reduction in Diesel Engines Using Pumpkin Seed Biodiesel Blends and CeO 2 Nanoparticles. International Journal of Energy Research, 2025 (1). ISSN 0363-907X

Sambandam, Padmanabhan and Punitha, Narayanasamy and Vijetha, K. and Baskar, S. and Shaisundaram, V S and Seikh, A. H. and Ifseisi, Ahmad A. and Sharma, Abhishek (2024) Effect of Graphite Nanoadditives on the Behavior of a Diesel Engine Fueled with Pyrolysis Fuel Recovered from Used Plastics. ACS Omega. ISSN 2470-1343

Viswanathan, Sivakumar and Saravanakumar, Sengottaiyan and Veerappan, Muthukumar and Shaisundaram, V S (2025) Assessment of Mechanical Strength, Thermal Stability, and Moisture Resistance of AA6061-Alumina-Banana Fiber Epoxy Fiber Metal Laminates. Fibers and Polymers. ISSN 1229-9197

Shaisundaram, V.S. and Chandrasekaran, M. and Shanmugam, Mohanraj and Padmanabhan, S. and Muraliraja, R. and Karikalan, L. (2021) Investigation of Momordica charantia seed biodiesel with cerium oxide nanoparticle on CI engine. International Journal of Ambient Energy, 42 (14). pp. 1615-1619. ISSN 0143-0750

Shaisundaram, V.S. and Sridhar, R. and Muraliraja, R. and Vinod Kumar, T. and Sathish, C. (2025) A Comprehensive Review of Nano additives Applications for Enhancing Palm Biodiesel Performance in Internal Combustion Engine. In: Advancing Technology with Multidisciplinary Innovation for Sustainable Growth (2025). SCIENTIFIC RESEARCH REPORTS. ISBN 978-81-9871349-0

Jacob, S. and Anish Krishnamurthi, V S and Ramasubramanian, S. and Baskar, S. and Shaisundaram, V S and Venugopal, S (2024) Development of Lightweight Material for Automotive structural Application A Review. In: ICAAMEE'24, EASWARI ENGINEERING COLLEGE Chennai.

Shaisundaram, V S and Sridhar, R. and Muraliraja, R. and Vinod Kumar, T. (2025) A COMPREHENSIVE REVIEW OF NANO ADDITIVES APPLICATIONS FOR ENHANCING PALM BIODIESEL PERFORMANCE IN INTERNAL COMBUSTION ENGINE. In: International Conference on Scientific Research and Revolution. SCIENTIFIC RESEARCH REPORTS, CHENNAI, p. 85. ISBN 978-93-7361-744-2

Shaisundaram, V S and Sridhar, R. and Muraliraja, R. and Vinod Kumar, T. and Sathish, C. (2025) A Comprehensive Review of Nano additives Applications for Enhancing Palm Biodiesel Performance in Internal Combustion Engine. In: Advancing Technology with Multidisciplinary Innovation for Sustainable Growth. SCIENTIFIC RESEARCH REPORTS, CHENNAI, pp. 63-71. ISBN 978-81-987134-9-0

Shaisundaram, V S and Sengottaiyan, Saravanakumar and Aruna, R. and Muraliraja, R. (2026) Machine learning-based prediction and optimization of performance and emission characteristics in CI engines fueled by pumpkin seed biodiesel with thermal barrier coating and cerium oxide nanoparticles. Fuel, 414. p. 138434. ISSN 00162361

Rathnakaran, Abilash and Muraliraja, R. and Shaisundaram, V S (2025) Electroless Ni–P–TiO₂ Nanocomposite Coatings for Enhanced Durability and Saltwater Corrosion Protection of Jet Ski Engine Components. Journal of Environmental Nanotechnology, 14 (3). pp. 685-691. ISSN 2279-0748

Shaisundaram, V S and Kumaravel, P and Bharathiraja, G and Nagaraj, M (2025) Optimization of Oxygen Enrichment in a CI Engine using Tallow Oil Biodiesel: A Response Surface Methodology Approach. Global NEST Journal. ISSN 1790-7632

Tamil Prabakaran, S. and Sengottaiyan, Saravanakumar and Yogaraj, D. and Shaisundaram, V S (2026) Multi-scale Optimization and Computational Validation for Enhancing the Microstructure, Mechanical Properties, and Physical Performance of Wire Arc Additive Manufacturing-Fabricated SS309L Stainless Steel. Journal of Materials Engineering and Performance, 35 (5). pp. 4640-4660. ISSN 1059-9495

Muraliraja, R. and Suyamburajan, Vijay Ananth and Shaisundaram, V S and Gowsikan, V. and Padmanabhan, S. (2023) Fundamentals of additive manufacturing technology and future outlooks. In: Mechanical Properties and Characterization of Additively Manufactured Materials. CRC Press, Boca Raton, pp. 47-65. ISBN 9781003430186

Shaisundaram, V. S. and Saravanakumar, S. and Balambica, V. and Sendil Kumar, D. and Chandrasekaran, M. and Muraliraja, R. and Muniappan, A. and Asres, Yalew and Vijayan, V. (2022) Effects of Thermal Barrier Coating Using Various Dosing Levels of Aluminium Oxide Nanoadditive Fuel on Diesel in Compressed Ignition Engine. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Muraliraja, R. and Pradeepkumar, K. and Mohanraj, P. and Vinod Kumar, T. and Dhanasekaran, C and Chandrasekaran, M. and Ragavanantham, S. and Shaisundaram, V S (2022) The Effects of Electroless Ni-P Coated SiC on the Properties of Magnesium Composite. Materials Performance and Characterization, 11 (1). p. 20210089. ISSN 23791365

Shaisundaram, V. S. and Chandrasekaran, M. and Mohan Raj, S. and Muraliraja, R. (2018) Investigation on the effect of thermal barrier coating at different dosing levels of cerium oxide nanoparticle fuel on diesel in a CI engine. International Journal of Ambient Energy, 41 (1). pp. 98-104. ISSN 0143-0750

Umar, MD. and Muraliraja, R. and Shaisundaram, V S and Wayessa, Shiferaw Garoma and B, Deepanraj (2022) Influence of Future Material Nano‐ZrO 2 and Graphene on the Mechanical Properties of Al Composites. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Shaisundaram, V S and Balambica, V. and Sendil Kumar, D. and Nithish, S. and Chandrasekaran, M. and Shanmugam, Mohanraj and Likassa, Dabala Misgana and B, Deepanraj (2022) Optimization of Dual Coating Using Electroless Ni‐P‐Nano‐TiO 2 and Plasma Yttria‐Stabilized Zirconia on Piston Crown and Cylinder Liner in CI Engine. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Shaisundaram, V.S. and Chandrasekaran, M. and Muraliraja, R. and Shanmugam, Mohanraj and Baskar, S. and Bhuvendran, Arun (2021) Investigation of Tamarind Seed Oil biodiesel with aluminium oxide nanoparticle in CI engine. Materials Today: Proceedings, 37. pp. 1417-1421. ISSN 22147853

Akash, R. and Muraliraja, R. and Suthan, R. and Shaisundaram, V.S. (2021) Synthesis and testing of aluminium composite using industrial waste as reinforcement. Materials Today: Proceedings, 37. pp. 634-637. ISSN 22147853

Dhinakaran, R. and Muraliraja, R. and Elansezhian, R. and Baskar, S. and Satish, S. and Shaisundaram, V.S. (2021) Utilization of solar resource using phase change material assisted solar water heater and the influence of nano filler. Materials Today: Proceedings, 37. pp. 1281-1285. ISSN 22147853

Selvam, M. Amala Justus and Arunkumar, S. and Balambica, V. and Padmanabhan, S. and Vinod Kumar, T. and Shaisundaram, V S (2022) Influence of copper anodization on structural and heat transfer characteristic of aluminum piston. Materials Today: Proceedings, 59. pp. 1407-1413. ISSN 22147853

Shaisundaram, V S and Karikalan, L. and Ramasubramanian, S. and Baskar, S. and Balaji, R. (2022) Design and Analysis of a Panel Using FEA. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 31-37.

Shaisundaram, V S and Chandrasekaran, M. and Hariharan, C. and Shanmugam, Mohanraj and Sujith, S. and Praveen Kumar, K. J. (2022) Automatic Flame Suppression System for Four Wheeler Passenger Vehicles. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 625-630.

Shaisundaram, V S and Naveen, K.S. (2023) Effect of lubricant on turning characteristics of duplex stainless steel. Materials Today: Proceedings. ISSN 22147853

Parthiban, P. and Kar, Saurav and Kumar Mondal, Anup and Gunasekar, S. and Shaisundaram, V S (2023) Stress–strain behaviour of (hpfrc) high-performance fibre reinforced concrete: An experimental study. Materials Today: Proceedings, 80. pp. 3119-3123. ISSN 22147853

Muthu Kamatchi, R. and Muraliraja, R. (2023) Optimization of squeeze casting process parameters for the production of Al composite reinforced with bone powder. Materials Today: Proceedings. ISSN 22147853

Shaisundaram, V S and Vignesh, R. (2023) Plastic design and strength on automotive hard trims doghouse. Materials Today: Proceedings. ISSN 22147853

Vinod Kumar, T. and Chandrasekaran, M. and Mohanraj, P. and Balasubramanian, Ravishankar and Muraliraja, R. and S. Shaisundaram, V (2018) Fillers preparation for polymer composite and its properties – a review. International Journal of Engineering & Technology, 7 (3.3). pp. 212-217. ISSN 2227-524X

Shaisundaram, V. S. and Chandrasekaran, M. and Mohan Raj, S. and Muraliraja, R. and Vinod Kumar, T. (2019) Control of carbon dioxide emission in automobile vehicles using CO 2 scrubber. International Journal of Ambient Energy, 40 (7). pp. 699-703. ISSN 0143-0750