Items where Subject is "Automotive Engines"

Article

Baskar, S. and Karikalan, L. and Shaisundaram, V.S. and Jacob, S and Venugopal, S (2018) Theoretical study and performance of vapour refrigeration system along with additive of zro 2. International Journal of Management, Technology And Engineering, 8 (12). ISSN 2249-7455

Baskar, S. and Vinoth, K. and Sambandam, P. (2023) Investigation on testing and analysis of polypropylene fibre under tensile load. Materials Today: Proceedings. ISSN 22147853

Jacob, S and Hemanath, D. (2022) Analysis of nano material based Zeolite catalytic converter and urea injection in single cylinder engine fuelled with diesel and plastic pyrolysis oil. Materials Today: Proceedings, 69 (3): 6945. pp. 888-895. ISSN 22147853

Jacob, S and Karikalan, L. (2021) Optimization of Combustion Characteristics of Diesel Engine Fueled by Biofuels and Its Diesel Blends with Additive Titanium Dioxide Nano-Particles. International Journal of Heat and Technology, 39 (6). pp. 1973-1978. ISSN 03928764

Jacob, S and Karikalan, L. and Baskar, S. (2020) Fabrication and tensile testing of composite hybrid joints. Materials Today: Proceedings, 21: 5241. pp. 612-615. ISSN 22147853

Jacob, S and Karikalan, L. and Bhowmick, Anirudh (2022) Experimental Investigation on the Effects of Exhaust Emission Reduction in a Single Cylinder CI Engine Fuelled with Diesel and Diesel Plastic Pyrolysis Oil with Zeolite Nanomaterials. International Journal of Photoenergy, 2022: 5317. pp. 1-9. ISSN 1110-662X

Jacob, S and Karikalan, L. and JoshuaRamesh Lalvani, J. Isaac and Sharma, Aman and Kannappan, Maghalengam (2022) Performance and Exhaust Emission Characteristics of C.I Engine Using Biofuels and Its Diesel Blend with Nano-Additives. Advances in Materials Science and Engineering, 2022: 6264. pp. 1-5. ISSN 1687-8434

Jacob, S and Kishore Kumar, R. (2023) Analysis of copper nanomaterial as catalyst for reduction of NOx gases in diesel engine. Materials Today: Proceedings. ISSN 22147853

Jacob, S and Majid, Mohd. and Naidu, S. C. V. Ramana Murty and Ramakrishna, Ch. Siva and Punitha, N. and Padmanabhan, S. and Khayum, Naseem and Yadav, Anil Singh and Sharma, Abhishek (2025) Performance and Emission Analysis of a Diesel Engine Fueled with Cashew Nut Shell-Derived Biodiesel and Its Blends. Engineering Proceedings. pp. 1-15. ISSN 2673-4591

Jothi Prakash, V M and Sathish, S and Gopalakrishnan, T. and Venugopal, S (2017) Reciprocating Sliding Behaviour of Solid Lubricant Coating over Modified Titanium Alloy Surfaces. IOP Conference Series: Materials Science and Engineering, 183. 012008. ISSN 1757-8981

Karikalan, L and Jacob, S and Baskar, S. and Venugopal, S (2020) Analyzing the influence of varied fuel injection pressure on diesel engine fueled with Karanja biodiesel. Materials Today: Proceedings, 21: 5307. pp. 291-294. ISSN 22147853

Karikalan, L and Venugopal, S and Logeshvaran, T (2022) Behaviour of energetic materials using reverse locking differential mechanism with bus body analysis. Materials Today: Proceedings, 69. pp. 786-788. ISSN 22147853

Karikalan, L and Vetrivel, A (2018) Analysis of Performance and Pollutant Characteristics of CI Engine Using the Mixture of Diesel and Eucalyptus Oil. International Journal of Mechanical and Production Engineering Research and Development, 8 (3). pp. 203-208. ISSN 2249-6890

Karikalan, L. and Chandrasekaran, M. and Baskar, S. (2021) Studies on CI engine characteristics with waste cooking oil as biomaterial. Materials Today: Proceedings, 37 (2). pp. 565-567. ISSN 22147853

Karikalan, L. and Chandrasekaran, M. and Ramasubramanian, S. and Vivek, P. (2019) Influence of modified pent roof combustion cavity on diesel engine performance and emission characteristics. International Journal of Ambient Energy, 40 (8). pp. 827-831. ISSN 0143-0750

Karikalan, L. and Chandrasekaran, M. and Venugopal, S and Jacob, S and Baskar, S. (2021) Investigations on diesel engine characteristics with Pongamia biodiesel at dissimilar compression ratios. International Journal of Ambient Energy, 42 (9): 9154. pp. 1005-1008. ISSN 0143-0750

Karikalan, L. and Sukenraj, K. and Chandrasekaran, M. (2021) Performance and pollutant analysis of diesel engine with cashew shell oil as bio-material. Materials Today: Proceedings, 37. pp. 685-689. ISSN 22147853

Niranjan, S. and Chandrasekaran, M (2025) Implementation of Lean Manufacturing Using MCDM-TOPSIS Approach in Switch Gear Manufacturing Industry. International Journal of Mechanical Engineering, 12 (6). pp. 62-70. ISSN 23488360

Padmanabhan, S. and Joel, C. and Mahalingam, S. and Ganesan, S. and Baskar, S. (2024) Sustainable Energy Solutions from Water Hyacinth Bioethanol Blends in Diesel Engines with Nano-Coated Pistons. International Research Journal of Multidisciplinary Scope, 05 (01). pp. 671-682. ISSN 2582631X

Ramasubramanian, S. and Manavalan, S and Gnanavel, C. and Balakrishnan, G (2017) Processing Of Neem And Jatropha Methyl Esters –Alternative Fuels From Vegetable Oil. IOP Conference Series: Materials Science and Engineering, 183. 012036. ISSN 1757-8981

Ramasubramanian, S. and Tennis, K. (2023) Lightweight material for weight reductions in an automotive suspension part lower link. Materials Today: Proceedings. ISSN 22147853

Ruban, M. and Karikalan, L. and Kanti Chakraborty, Soumya (2021) Performances and emissions characteristics of diesel engine by using Jatropha oil. Materials Today: Proceedings, 37. pp. 631-633. ISSN 22147853

Ruban, M. and Kishore, C. (2023) Design and optimization of nylon coated display unit cabin. Materials Today: Proceedings. ISSN 22147853

Ruban, M. and Ramasubramanian, S. and Pugazhenthi, R. and Sivaganesan, S. (2017) Investigation of Performance Analysis and Emission Characteristics of Waste Plastic Fuel. IOP Conference Series: Materials Science and Engineering, 183. 012037. ISSN 1757-8981

Sambandam, Padmanabhan and Punitha, Narayanasamy and Vijetha, K. and Baskar, S. and Shaisundaram, V S and Seikh, A. H. and Ifseisi, Ahmad A. and Sharma, Abhishek (2024) Effect of Graphite Nanoadditives on the Behavior of a Diesel Engine Fueled with Pyrolysis Fuel Recovered from Used Plastics. ACS Omega. ISSN 2470-1343

Saravanan, S. and Vijayan, V. and Balan, A.V. and Sathish, T. and Parthiban, A. (2020) Exploration on Surface Roughness in Abrasive Water Jet Cutting of AA6063-TiC Composites for Vehicle Structural Applications. International Journal of Vehicle Structures and Systems, 11 (4). ISSN 0975-3060

Sathish, S and Parthiban, A. and Venugopal, S and Jothi Prakash, V. M (2017) Performance and Analysis of Floating dome Anaerobic Digester with Wet and Dry Feedstock. IOP Conference Series: Materials Science and Engineering, 183. 012033. ISSN 1757-8981

Sathish, S. and Chandrasekaran, M. and Parthiban, A. (2018) Effect of co-digestion agricultural-industrial residues: various slurry temperatures. International Journal of Ambient Energy, 39 (7). pp. 694-697. ISSN 0143-0750

Shaisundaram, V. S. and Chandrasekaran, M. and Mohan Raj, S. and Muraliraja, R. and Vinod Kumar, T. (2019) Control of carbon dioxide emission in automobile vehicles using CO 2 scrubber. International Journal of Ambient Energy, 40 (7). pp. 699-703. ISSN 0143-0750

Sivaganesan, S. and Chandrasekaran, M. and Dhanasekaran, C and Parthiban, A. (2018) The Impact of Various Compression Ratio and Influence of Bio Additive With Jatropha Methyl Ester Biodiesel in DI Diesel Engine. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 989-996. ISSN 2249-6890

Sudheer Kumar Battula et al.,, Sudheer Kumar Battula et al., (2018) Vibration Analysis on Engine Elastomeric Angular Mount. International Journal of Mechanical and Production Engineering Research and Development, 8 (6). pp. 963-976. ISSN 2249-6890

Venugopal, S and Baburajan, R and Baskar, S. and Jothi prakash, V M (2018) Testing of helical spring using composite materials. International Journal of Management, Technology And Engineering, 8 (12). ISSN 2249-7455

Venugopal, S and Baburajan, R and Karikalan, L. and Baskar, S. (2018) Testing of helical spring under compression test. International Journal of Management, Technology And Engineering, 8 (12). ISSN 2249-7455

Venugopal, S and Karikalan, L. (2021) Microstructure and physical properties of hybrid metal matrix composites AA6061-TiO2-SiC via stir casting techniques. Materials Today: Proceedings, 37. pp. 1289-1294. ISSN 22147853

Venugopal, S and Karikalan, L. and Arima, R and Bramma, S and Jacinth, J (2019) TWO STAGE REDUCTION GEAR BOX. Universal Review, 8 (4).

Venugopal, S and Karikalan, L. and Baburajan, M (2020) Experimental Understanding of Composite Fibers for Motor Cycle Brakes. Test Engineering and Management.

Venugopal, S and Karikalan, L. and Sanjay Mohan, R.V. (2022) Nickel alloy coated fuel tank with digital fuel level indicator security system. Materials Today: Proceedings, 69. pp. 918-921. ISSN 22147853

Venugopal, S and Kumaran, S. and Sagar, A and Mohamed Ali, K and Sameem, A (2018) PERFORMANCE ANALYSIS OF HEAT DISSIPATION IN RADIATOR TUBE WITH NANO COATING. International Journal of modern trends in Engineering and research. ISSN 2393-8161

Venugopal, S and Venkateshwaran, M. (2023) Study and analysis of structural steel sway bar using linear and nonlinear regression techniques. Materials Today: Proceedings. ISSN 22147853

Vijayan, V. and Parthiban, A. and Sathish, T. and Sankar, L. Ponraj and Kumar, S. Dinesh and Saravanakumar, S. and Tafesse, Dawit and Chelladurai, Samson Jerold Samuel (2021) [Retracted] Optimization of Reinforced Aluminium Scraps from the Automobile Bumpers with Nickel and Magnesium Oxide in Stir Casting. Advances in Materials Science and Engineering, 2021 (1). ISSN 1687-8434

Vinod Kumar, T. and Kailasam, R and Chandrasekaran, M. and Vivek, P. and Arunkumar, S. (2019) EXPERIMENTAL INVESTIGATION OF DIESEL ENGINE USING GOBAR GAS BLENDS. International Journal of Management, Technology And Engineering, 8 (12). pp. 4542-4551. ISSN 2249-7455

Book Section

Karthick, M. and Logesh, K. and Baskar, S. and Sharma, Abhishek (2022) Performance and Emission Characteristics of Single-Cylinder Diesel Engine Fueled with Biodiesel Derived from Cashew Nut Shell. In: Advancement in Materials, Manufacturing and Energy Engineering, Vol. II. Springer, pp. 521-529.

Kumaraswamy, J. and Siva Ramakrishna, Ch. and Ramasubramanian, S. and Mishra, Rahul and Sakhare, D. T. and Karthik, K. and Baskar, S. and Pandey, Krishna Kant (2025) Design and Analysis of Gudgeon Pin to Minimize Stress Concentration by Selecting Different Material Through FEA. In: Lecture Notes in Mechanical Engineering ((LNME)). Springer Nature Link, pp. 339-352.

Padmanabhan, S. and Siva Ramakrishna, Ch. and Lalitha Saravanan, A. and Bokde, Ramesh and Venugopal, S and Manikkavasakan, V. and Pandey, Krishna Kant (2025) Investigation of Turning Parameters on AL7075 Alloy Reinforcement with Silicon Carbide for a Surface Roughness of Composite Material. In: Lecture Notes in Mechanical Engineering ((LNME)). Springer Nature Link, pp. 325-337.

Shaisundaram, V S and Chandrasekaran, M. and Hariharan, C. and Shanmugam, Mohanraj and Sujith, S. and Praveen Kumar, K. J. (2022) Automatic Flame Suppression System for Four Wheeler Passenger Vehicles. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 625-630.

Shaisundaram, V S and Karikalan, L. and Ramasubramanian, S. and Baskar, S. and Balaji, R. (2022) Design and Analysis of a Panel Using FEA. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 31-37.

Shaisundaram, V.S and Suresh, J and Karikalan, L. and Jacob, S and Baskar, S. (2024) Optimizing Fuel Efficiency in Hybrid Electric Vehicles a Comparative Analysis of Control Strategies. In: Emerging Technologies in Automotive and Mechanical Sciences, Volume IV. SRR. ISBN 978-81-970420-4-1

Conference or Workshop Item

Baskar, S. and Vinoth Bresnav, K. and P, Sambandam (2022) Investigation on testing and analysis of polypropylene fibre under tensile. In: iCAM 2022. (In Press)

Jacob, S and Anish Krishnamurthi, V S and Ramasubramanian, S. and Baskar, S. and Venugopal, S (2024) Development of Lightweight Materials for Automotive Structural Applications: A Review. In: Advances in Automobile, Manufacturing and Mechanical Engineering.

Karikalan, L and Srinivasan, R. and Ramasubramanian, S and Ruban, M and Venugopal, S (2024) Exploring the Role of Composite Materials in Next-Generation Vehicles. In: EXPLORING THE ROLE OF COMPOSITE MATERIALS IN NEXT-GENERATION VEHICLES.

M M, Ramakrishna and Atyam, Nageswara Rao and Chaurasia, Nikhil and Senthamil, L Sahaya and Shah, Mohd Asif and Raja, V. L. (2023) An Automation Innovation of Gearbox Vehicle Control by Using Machine Learning Based Robotic Operation. In: 2023 International Conference on Disruptive Technologies (ICDT), Greater Noida, India.

Ramasubramanian, S. and Theopaul Leander Fernando, P A and Karikalan, L and Ruban, M and Venugopal, S (2024) Design and Development of a Car Interior Door Trim. In: Advances in Automobile, Manufacturing and Mechanical Engineering, 5.4.2024, chennai.

Venugopal, S and Babu rajan, R and Jaygouthaman, R and Ruban, M. and Ramasubramaniam, S and Shaisundaram, V.S. and Jacob, S (2024) Experimental Understanding of Composite Fibers for Motorcycle Brakes. In: Advances in Automobile, Manufacturing and Mechanical Engineering, 5.4.2024, chennai.

Other

Venugopal, S and Ruban, M. and Shaisundaram, V S and Baskar, S. and Manikandan, S STUDY ON SELF-HEALING COATINGS FOR SCRATCH-RESISTANT CAR PAINT. IJRAR.