Items where Subject is "Automotive Engines"

B

Baskar, S. and Vinoth, K. and Sambandam, P. (2023) Investigation on testing and analysis of polypropylene fibre under tensile load. Materials Today: Proceedings. ISSN 22147853

J

Jacob, S. and Karikalan, L. and Baskar, S. (2020) Fabrication and tensile testing of composite hybrid joints. Materials Today: Proceedings, 21. pp. 612-615. ISSN 22147853

Jacob, S. and Kishore Kumar, R. (2023) Analysis of copper nanomaterial as catalyst for reduction of NOx gases in diesel engine. Materials Today: Proceedings. ISSN 22147853

Jothi Prakash, V M and Sathish, S and Gopalakrishnan, T and Venugopal, S (2017) Reciprocating Sliding Behaviour of Solid Lubricant Coating over Modified Titanium Alloy Surfaces. IOP Conference Series: Materials Science and Engineering, 183. 012008. ISSN 1757-8981

K

Karikalan, L and Vetrivel, A (2018) Analysis of Performance and Pollutant Characteristics of CI Engine Using the Mixture of Diesel and Eucalyptus Oil. International Journal of Mechanical and Production Engineering Research and Development, 8 (3). pp. 203-208. ISSN 2249-6890

Karikalan, L. and Chandrasekaran, M. and Baskar, S. (2021) Studies on CI engine characteristics with waste cooking oil as biomaterial. Materials Today: Proceedings, 37. pp. 565-567. ISSN 22147853

Karikalan, L. and Chandrasekaran, M. and Ramasubramanian, S. and Vivek, P. (2019) Influence of modified pent roof combustion cavity on diesel engine performance and emission characteristics. International Journal of Ambient Energy, 40 (8). pp. 827-831. ISSN 0143-0750

Karikalan, L. and Chandrasekaran, M. and Venugopal, S. and Jacob, S. and Baskar, S. (2021) Investigations on diesel engine characteristics with Pongamia biodiesel at dissimilar compression ratios. International Journal of Ambient Energy, 42 (9). pp. 1005-1008. ISSN 0143-0750

Karikalan, L. and Jacob, S. and Baskar, S. and Venugopal, S. (2020) Analyzing the influence of varied fuel injection pressure on diesel engine fueled with Karanja biodiesel. Materials Today: Proceedings, 21. pp. 291-294. ISSN 22147853

Karikalan, L. and Sukenraj, K. and Chandrasekaran, M. (2021) Performance and pollutant analysis of diesel engine with cashew shell oil as bio-material. Materials Today: Proceedings, 37. pp. 685-689. ISSN 22147853

Karthick, M. and Logesh, K. and Baskar, S. and Sharma, Abhishek (2022) Performance and Emission Characteristics of Single-Cylinder Diesel Engine Fueled with Biodiesel Derived from Cashew Nut Shell. In: Advancement in Materials, Manufacturing and Energy Engineering, Vol. II. Springer, pp. 521-529.

P

Padmanabhan, S. and Joel, C. and Mahalingam, S. and Ganesan, S. and Baskar, S. (2024) Sustainable Energy Solutions from Water Hyacinth Bioethanol Blends in Diesel Engines with Nano-Coated Pistons. International Research Journal of Multidisciplinary Scope, 05 (01). pp. 671-682. ISSN 2582631X

R

Ramasubramanian, S and Manavalan, S and Gnanavel, C and Balakrishnan, G (2017) Processing Of Neem And Jatropha Methyl Esters –Alternative Fuels From Vegetable Oil. IOP Conference Series: Materials Science and Engineering, 183. 012036. ISSN 1757-8981

Ramasubramanian, S. and Tennis, K. (2023) Lightweight material for weight reductions in an automotive suspension part lower link. Materials Today: Proceedings. ISSN 22147853

Ruban, M and Ramasubramanian, S and Pugazhenthi, R and Sivaganesan, Sivaganesan (2017) Investigation of Performance Analysis and Emission Characteristics of Waste Plastic Fuel. IOP Conference Series: Materials Science and Engineering, 183. 012037. ISSN 1757-8981

Ruban, M. and Karikalan, L. and Kanti Chakraborty, Soumya (2021) Performances and emissions characteristics of diesel engine by using Jatropha oil. Materials Today: Proceedings, 37. pp. 631-633. ISSN 22147853

Ruban, M. and Kishore, C. (2023) Design and optimization of nylon coated display unit cabin. Materials Today: Proceedings. ISSN 22147853

Ruban, M. and Shaisundaram, V.S. and Senthamizh, R. (2022) Analysis of laminated plain carbon steel leaf spring in maxi truck. Materials Today: Proceedings, 69. pp. 700-702. ISSN 22147853

S

S, Jacob and L, Karikalan (2021) Optimization of Combustion Characteristics of Diesel Engine Fueled by Biofuels and Its Diesel Blends with Additive Titanium Dioxide Nano-Particles. International Journal of Heat and Technology, 39 (6). pp. 1973-1978. ISSN 03928764

Saravanan, S. and Vijayan, V. and Balan, A.V. and Sathish, T. and Parthiban, A. (2020) Exploration on Surface Roughness in Abrasive Water Jet Cutting of AA6063-TiC Composites for Vehicle Structural Applications. International Journal of Vehicle Structures and Systems, 11 (4). ISSN 0975-3060

Sathish, S. and Chandrasekaran, M. and Parthiban, A. (2018) Effect of co-digestion agricultural-industrial residues: various slurry temperatures. International Journal of Ambient Energy, 39 (7). pp. 694-697. ISSN 0143-0750

Sathish, S. and Parthiban, A. and Venugopal, S. and Jothi Prakash, V. M. (2017) Performance and Analysis of Floating dome Anaerobic Digester with Wet and Dry Feedstock. IOP Conference Series: Materials Science and Engineering, 183. 012033. ISSN 1757-8981

Shaisundaram, V. S. and Chandrasekaran, M. and Hariharan, C. and Shanmugam, Mohanraj and Sujith, S. and Praveen Kumar, K. J. (2022) Automatic Flame Suppression System for Four Wheeler Passenger Vehicles. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 625-630.

Shaisundaram, V. S. and Chandrasekaran, M. and Mohan Raj, S. and Muraliraja, R. and Vinodkumar, T. (2019) Control of carbon dioxide emission in automobile vehicles using CO 2 scrubber. International Journal of Ambient Energy, 40 (7). pp. 699-703. ISSN 0143-0750

Shaisundaram, V. S. and Karikalan, L. and Ramasubramanian, S. and Baskar, S. and Balaji, R. (2022) Design and Analysis of a Panel Using FEA. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 31-37.

Sivaganesan, S. (2018) The Impact of Various Compression Ratio and Influence of Bio Additive With Jatropha Methyl Ester Biodiesel in DI Diesel Engine. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 989-996. ISSN 2249-6890

V

Venugopal, S. and Karikalan, L. and Sanjay Mohan, R.V. (2022) Nickel alloy coated fuel tank with digital fuel level indicator security system. Materials Today: Proceedings, 69. pp. 918-921. ISSN 22147853

Venugopal, S. and Venkateshwaran, M. (2023) Study and analysis of structural steel sway bar using linear and nonlinear regression techniques. Materials Today: Proceedings. ISSN 22147853

Vijayan, V. and Parthiban, A. and Sathish, T. and Sankar, L. Ponraj and Kumar, S. Dinesh and Saravanakumar, S. and Tafesse, Dawit and Chelladurai, Samson Jerold Samuel (2021) [Retracted] Optimization of Reinforced Aluminium Scraps from the Automobile Bumpers with Nickel and Magnesium Oxide in Stir Casting. Advances in Materials Science and Engineering, 2021 (1). ISSN 1687-8434