Browse by Employee ID

Baskar, S. and Palapetta, Surya Cholayil and Harichandran, G. and Indumathi, G. and Babu, L.Ganesh and Raja, J. Emerson and Praveena Kumara, K.M. and Karunakaran, K. (2025) Synthesis, characterization, comparative study, DFT analysis, ADMET prediction and molecular docking study of Thiophen-2-yl and 4-pyridinyl derivatives of bis (4-hydroxy-2H-chromen-2-one). Results in Chemistry, 18. p. 102679. ISSN 22117156

Gopalakrishnan, T. and Saravanan, R. and Karunakaran, K. (2019) Numerical Investigation of Toggle Assembly of Landing Gears in Aircraft: Technical note. International Journal of Vehicle Structures and Systems, 11 (2). ISSN 0975-3060

Karunakaran, K. and Chandrasekaran, M. (2017) Investigation of Machine-ability of Inconel 800 in EDM with Coated Electrode. IOP Conference Series: Materials Science and Engineering, 183. 012014. ISSN 1757-8981

Karunakaran, K. and Pugazhenthi, R. and Anbuchezhiyan, G. and Saravanan, R. and Venkateswar Reddy, M (2022) Experimental investigations on synthesis and characterization of tamarind seed powder reinforced Bio- composites. Materials Today: Proceedings, 64. pp. 760-764. ISSN 22147853

Karunakaran, K. and Chandrasekaran, M. and Yuan, H.L. and Agarwal, R.K. and Tandon, P. and Wang, E.X. (2017) Influence of Process Parameters in n-PMEDM of Inconel 800 with Electrode and Coated Electrodes. MATEC Web of Conferences, 95. 02002. ISSN 2261-236X

Karunakaran, K. and Chandrasekaran, M. (2017) MACHINEABILITY STUDY ON DIE SINKING EDM OF INCONEL 800 WITH ELECTROLYTE COPPER ELECTRODE. MACHINEABILITY STUDY ON DIE SINKING EDM OF INCONEL 800 WITH ELECTROLYTE COPPER ELECTRODE, 12 (8).

Karunakaran, K. and Chandrasekaran, M. (2016) Experimental Investigation of process parameters influence on machining Inconel 800 in the Electrical Spark Eroding Machine. IOP Conference Series: Materials Science and Engineering, 157. 012007. ISSN 1757-8981

Karunakaran, K. and Ramasubramanian, S. and Sivabalan, S. and Ruban, M. and Naresh, D (2025) SURFACE ENGINEERING OF 316L STAINLESS STEEL USING DUPLEX CRN/TIN COATINGS VIA DC MAGNETRON SPUTTERING: MICROSTRUCTURAL, TRIBOLOGICAL, AND HARDNESS EVALUATION. In: International Conference on Scientific Research and Revolution.

Aneesh, V. N. and Karunakaran, K. (2022) Experimental investigation of sensitiveness wire electrical discharge machining parameters for12X18H10T - Stainless steel. Materials today Proceedings. 020025.

Aneesh, V.N. and Karunakaran, K. (2023) Experimental investigation on sensitiveness WEDM parameters for12X18H10T – Stainless steel. Materials Today: Proceedings, 81. pp. 454-458. ISSN 22147853

Jerin, A. and Karunakaran, K. (2023) Machinability investigation and optimizing process parameters in ECM of stainless steel −12X18H10T for minimizing surface roughness. Materials Today: Proceedings, 81. pp. 443-448. ISSN 22147853

Jerin, A. and Karunakaran, K. (2021) Advances in simulation modeling and analysis of curvilinear electro chemical machining process. Materials Today: Proceedings, 37. pp. 1588-1591. ISSN 22147853

Muthuraman, P. and Karunakaran, K. (2021) Optimization of face milling process parameters by GRA with deep cryogenic treated milling cutter. Materials Today: Proceedings, 37. pp. 1613-1617. ISSN 22147853

Malladi, Avinash and Karunakaran, K. (2021) DMLS – An insight for unproblematic production. Materials Today: Proceedings, 37. pp. 1986-1990. ISSN 22147853

Malladi, Avinash and Karunakaran, K. and Saravanan, R. and Asres, Yalew and Ares, Alicia E. (2022) Material Behaviour of Three Blade Propeller Using Metal Additive Manufacturing Techniques. Advances in Materials Science and Engineering, 2022. pp. 1-7. ISSN 1687-8434

Jerin, A. and Karunakaran, K. (2022) Establish control over process parameters on ECM for improving the MRR of 12X18H10T - Stainless steel. AIP Conference Proceedings, 2473 (1). 020027.

Jerin, A. and Karunakaran, K. (2022) Minimizing maximum height of the profile on stainless steel of 12X18H10T for ECM. AIP conference Proceedings, 2473. 020028.

Karunakaran, K. and Ramasubramanian, S. and Sivabalan, S. and Ruban, M. (2025) SURFACE ENGINEERING OF 316L STAINLESS STEEL USING DUPLEX CRN/TIN COATINGS VIA DC MAGNETRON SPUTTERING: MICROSTRUCTURAL, TRIBOLOGICAL, AND HARDNESS EVALUATION. In: International Conference on Scientific Research and Revolution ICSRR 2025, August 17, 2025.

Karunakaran, K. and Ramasubramanian, S. and Sivabalan, S. and Ruban, M. and Naresh, D and Saranya, Kumaresan (2025) Surface Engineering of 316L Stainless Steel Using Duplex CrN/TiN Coatings via DC Magnetron Sputtering: Microstructural, Tribological, and Hardness Evaluation. In: Advancing Science and Technology through Multidisciplinary Innovation toward the Future (2025). SRR.

Sridhar, R. and Baskar, S. and Shaisundaram, V.S. and Karunakaran, K. and Ruban, M. and Joseph Irudaya Raja, S. (2021) Design and development of material behavior of line follower automated vehicle. Materials Today: Proceedings, 37. pp. 2193-2195. ISSN 22147853

Ramasubramanian, S. and Chandrasekaran, M. and Sridhar, R. and Karunakaran, K. (2017) Design, Manufacture and Analysis of Al/SiC MMCs for Connecting Rod. IOP Conference Series: Materials Science and Engineering, 183. 012009. ISSN 1757-8981

Karunakaran, K. and Famitha Begum, K and Shilpi Agrwal, A and Gokulakrishnan, A (2025) Personality Development. In: Personality Development. New Chennai Publications.

Karunakarn, K and Hemalath, KH and Kaviya, M and Yashaswini, S and Malathy, N and Hemalatha, S A Comprehensive Framework for Detection and Mitigation of Side-Channel Attacks in Contemporary Cryptosystems. IEEE. (In Press)

Karunakaran, Kuppusamy and Gopi, Periyappillai and Saravanakumar, Sengottaiyan and Periyasamy, Rajendran (2025) Deep Cryogenic Treatment of Various Electrodes for Enhanced Electrochemical Machining Performance of Wire Arc Additive Manufactured Stainless Steel. Steel research International. pp. 1-18.

Somanathan T (2026) Copper nano coated radiator for enhanced thermal efficiency. 202641019940 A.

Vinod Kumar, T. and Ajith Arul Daniel, S and Karunakaran, K. and Arunkumar, S. and Muthuraman, V. (2023) NANO COATING: ADVANCED PROTECTIVE AND FUNCTIONAL SURFACE TECHNOLOGY. In: 2nd International Conference on Multidisciplinary Science and Technology towards Sustainability, March 23 2025, Virtual mode.

Karunakarn, K and Hemalatha, K H and Kaviya, M and Yashashwini, S. and Malathy, N and Hemalatha, S An IoMT-Based Smart Intravenous Drip Monitoring System with Automated Flow Control and Alert Generation. IEEE. (In Press)

Karunakaran, K and Kotteeswaran, M and Jamuna, R and Vetrivel, V (2025) Total Quality Management. New Chennai Publications, Chennai, Tamil Nadu. ISBN 978-81-984949-2-4

Ruban, M and Vijayaraj, S and Soundarya, M K and Sridhar, R and Karunakaran, K and Ajith Arul Daniel, S and Baskar, S (2025) AI Agents in Modern Manufacturing Systems. Amazon Corporate. ISBN 978-9334384604

Ruban, M and Vijayaraj, S and Soundarya, M K and Sridhar, R and Baskar, S and Ajith Arul Daniel, S and Vijay Aananth, S and Gnanavel, C and Karunakaran, K (2026) Autonomous Vehicles transportation in Future: Vehicles transportation R. 1 ed. Amazon. ISBN ‎978-9360399443

Arul Peter, A and Karunakaran, K. and Gnanavel, C. and Gopalakrishnan, T. (2023) REVOLUTIONIZING MATERIAL SCIENCE WITH AI: FROM PREDICTIVE MODELLING TO INNOVATIVE DISCOVERY. In: Progress and Innovations in Artificial Intelligence and Machine Learning. Imaginex Inks Publication, pp. 112-124. ISBN 978-81-965852-9-7-3

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Karunakaran, K. and Venkateswar Reddy, M. (2022) Experimentally investigating cutting force reduction performance by nano-alumina particles enriched waste coconut oil Nano fluid in electric motor shaft manufacturing. Materials Today: Proceedings, 64. pp. 765-770. ISSN 22147853

Ruban, M and Vijayaraj, S and Soundarya, M K and Sridhar, R and Baskar, S and Karunakaran, K and Gopalakrishnan, T and Ajith Arul Daniel, S and Gnanavel, C and Muthuraman, V (2026) Industry 4.0 and the Rise of Artificial Intelligence in Production: Artificial Intelligence in Production. Amazon Kindle. ISBN 978-9355255044

Karunakaran, K. and Malladi, Avinash (2022) Design approach for metal additive manufacturing. AIP conference Proceedings, 2473 (1). 020024.

Karunakaran, K. and Chandrasekaran, M. (2017) Experimental Investigation Nano Particles Influence in NPMEDM to Machine Inconel 800 with Electrolyte Copper Electrode. IOP Conference Series: Materials Science and Engineering, 197. 012068. ISSN 1757-8981

Muthuraman, P. and Karunakaran, K. (2022) Al–Fe Alloy Connecting Rod—A Choice for Power Amplification in IC Engines. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 1055-1062.