Items where Author is "Gnanavel, C."

Prakash, N. Ram and Gnanavel, C. (2024) Investigation of Quartz-Rich Granite Dust Particle-Reinforced Aluminized Glass–Kenaf Fiber-Reinforced Polyester Composite: Load Bearing, Water absorption and Flame Properties. Fibers and Polymers, 25 (9). pp. 3525-3537. ISSN 1229-9197

Sivakumar, V. and Visagavel, K. and Kumaraswamy, J. and Balaji, E. and Khalkar, V. and Gnanavel, C. and Chakravarthy, P. R. Kalyana and Baskar, S. and Vijayan, V. (2024) Performance study and analysis of Al2O3 Nanofluid under different flow conditions. Interactions, 245 (1). ISSN 3005-0731

Prakash, N. Ram and Gnanavel, C. (2024) Effect of rice husk ash silicon nitride on mechanical, wear, thermal conductivity, and flammability behavior of aluminized glass-kenaf fiber-reinforced polyester composite. Biomass Conversion and Biorefinery. ISSN 2190-6815

Saravanan, R. and Gnanavel, C. and Ajith Arul Daniel, S. and Rajesh, S. and Kamatchi, T. and Anbuchezhiyan, G. and Sreekanth, S. (2023) Analysis of mechanical properties enhancement on composites of AA7175 by multi walled carbon nano tube (MWCNT). Materials Today: Proceedings. ISSN 22147853

Amuthan, T. and Saravanan, R. and Gnanavel, C. and Manikandan, R. and Jagadeeswaran, P. and Anbuchezhiyan, G. and Ganesh, M. (2023) Cutting zone temperature reduction in by using novel nanofluid in SAE1144 machining. Materials Today: Proceedings. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Baskaran, P. and Vignesh, M. and Aneesh, V.N. and Anbuchezhiyan, G. and Ganesh, M. (2023) Tool wear effects on green and WCO/MoS2 nanofluid clean machining. Materials Today: Proceedings. ISSN 22147853

Kumaraswamy, J. and Shetty, Vidyasagar and Sanman, S. and Naik, Premkumar and Shedthi, Shabari and Gnanavel, C. and Mogose, Ibsa Neme and Vijayan, V. (2022) Thermal Analysis of Ni-Cu Alloy Nanocomposites Processed by Sand Mold Casting. Advances in Materials Science and Engineering, 2022. pp. 1-11. ISSN 1687-8434

Vijayaraghavan, P. and Janakiraman, V. and Surulivel rajan, T. and Logesh, K. and Rajiv Gandhi, N. and Gnanavel, C. and Sathi, G. (2022) Analysis of titanium coated silencer exhaust gas emission in automobile vehicle using artificial neural network. Materials Today: Proceedings, 69. pp. 732-738. ISSN 22147853

Rajesh, S. and Saravanan, R. and Sekar, C.B. and Gnanavel, C. and Malladi, Avinash and Nagarathi, D.K. (2022) Comparing green Machining and clean technology based Machining for tool wear reduction in Machining SAE 1045 steel. Materials Today: Proceedings, 62. pp. 1308-1313. ISSN 22147853

Chandragowda, M. and Gnanavel, C. and Saravanan, D. and Stalin David, D. and Parthiban, R. and Rajesh, A.S. (2022) Consequence of silanee combination representative on the mechanical possessions of sugarcane bagasse and polypropylene amalgams. Materials Today: Proceedings, 56. pp. 1743-1751. ISSN 22147853

Rajesh, S. and Saravanan, R. and Kamatchi, T. and Gnanavel, C. and Ajith Arul Daniel, S. and Nagarathi, D.K. (2022) Evaluation on hardness and percentage of elongation discrepancy by Zinc oxide nanoparticles on AA6070 alloy composites. Materials Today: Proceedings, 62. pp. 1921-1924. ISSN 22147853

Aswin Kumar, S. and Gnanavel, C. and Pugazhenthi, R. and Baradeswaran, A. (2022) Experimental Investigation of Polymers Gears to the Composite Gears. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 1013-1027.

Gnanavel, C. and Saravanan, R. and Malladi, Avinash and Sekar, C.B. and Rajesh, S. and Nagarathi, D.K. (2022) Feed force based optimization of process parameters by bio-nanofluid for machining SAE 1045 steel. Materials Today: Proceedings, 62. pp. 1319-1324. ISSN 22147853

Baskaran, P. and Saravanan, R. and Vignesh, M. and Prasanna, N. and Gnanavel, C. and Nagarathi, D.K. and Gopalakrishnan, T. (2022) Influence of molybdenum disulfide particles’ concentration on waste cooking oil nano fluid coolant in cutting force reduction on machining SAE 1144 steel. Materials Today: Proceedings, 62. pp. 1969-1972. ISSN 22147853

Saravanan, R. and Rajesh, S. and Gnanavel, C. and Malladi, Avinash and Sekar, C.B. and Nagarathi, D.K. (2022) Reconnoitering the influence of Nano fluid of Nano boracic acid particles enriched waste coconut oil in Machining SAE 1045 shaft on modification Surface finish. Materials Today: Proceedings, 62. pp. 1330-1335. ISSN 22147853

Maruthapandian, M. and Pugazhenhi, R. and Gnanavel, C. (2022) Study the impaction tool speed on the friction stir welding of magnesium alloys plates. Materials Today: Proceedings, 69. pp. 832-836. ISSN 22147853

Saravanan, R. and Gnanavel, C. and Rajesh, S. and Kamatchi, T. and Ajith Arul Daniel, S. and Nagarathi, D.K. (2022) Synthesis of Zinc oxide and CNT in AA7178 aluminium alloy composite impression on characteristics. Materials Today: Proceedings, 62. pp. 1973-1976. ISSN 22147853

Malladi, Avinash and Saravanan, R. and Gnanavel, C. and Rajesh, S. and Sekar, C.B. and Nagarathi, D.K. (2022) Taguchi based parameter optimization for cutting force reduction in SAE 1045 steel machining with nanofluid. Materials Today: Proceedings, 62. pp. 1325-1329. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Gopalakrishnan, T. and Pugazhenthi, R. (2021) Fracture toughness reinforcement by CNT on G/E/C hybrid composite. Materials Today: Proceedings, 37. pp. 1046-1050. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2021) Investigation of appropriateness of coated steel piston for aluminium alloy piston for small engines. International Journal of Ambient Energy, 41 (11). pp. 1293-1298. ISSN 0143-0750

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2021) CFD analysis of solar still with PCM. Materials Today: Proceedings, 37. pp. 694-700. ISSN 22147853

Ali, K. S. Ashraff and Mohanavel, V. and Gnanavel, C. and Vijayan, V. and Senthilkumar, N. (2021) Structural and optical behavior of SnS2/NiFe2O4 NCs prepared via novel two-step synthesis approach for MB and RhB dye degradation under sun light irradiation. Research on Chemical Intermediates, 47 (5). pp. 1941-1954. ISSN 0922-6168

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer augmentation by nano-fluids and Spiral Spring insert in Double Tube Heat Exchanger – A numerical exploration. Materials Today: Proceedings, 21. pp. 857-861. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer augmentation by nano-fluids and circular fin insert in double tube heat exchanger – A numerical exploration. Materials Today: Proceedings, 21. pp. 934-939. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2020) Heat transfer enhancement through nano-fluids and twisted tape insert with rectangular cut on its rib in a double pipe heat exchanger. Materials Today: Proceedings, 21. pp. 865-869. ISSN 22147853

Saravanan, R. and Gnanavel, C. (2020) SPM is a right choice for improving quality and reliability and reduction of cost and manufacturing time – A case study. Materials Today: Proceedings, 21. pp. 993-999. ISSN 22147853

Jacob, S. and Karikalan, L. and Baskar, S. and Gnanavel, C. (2019) Damping Characteristics of Laminated Semi-Cylindrical Shells: Technical Note. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. (2019) Intensification of Heat Transfer in a Double Tube Heat Exchanger with Nano-Fluids and Trapezoidal Cut Twisted Tape - A Numerical Study. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Saravanan, R. and Gnanavel, C. (2019) Synthesis and characterization of treated banana fibers and selected jute fiber based hybrid composites. Materials Today: Proceedings, 21. pp. 988-992. ISSN 22147853

Sivaganesan, S. and Chandrasekaran, M. and Ramasubramanian, S. and Gnanavel, C. (2018) The influence of bio additive on the compression ignition engine with diesel and Jatropha methyl ester biodiesel. International Journal of Ambient Energy, 39 (4). pp. 377-381. ISSN 0143-0750

Gnanavel, C. and Saravanan, R and Chandrasekaran, M. and Pugazhenthi, R. (2017) Case Study of Cycle Time Reduction by Mechanization in Manufacturing Environment. IOP Conference Series: Materials Science and Engineering, 183. 012023. ISSN 1757-8981

Gopalakrishnan, T. and Raja, M and Jothi Prakash, V M and Gnanavel, C. (2017) Design and Fabrication of E-Glass /carbon/graphite epoxy hybrid composite leaf spring. IOP Conference Series: Materials Science and Engineering, 183. 012004. ISSN 1757-8981

Gnanavel, C. and Saravanan, R and Chandrasekaran, M. and Jayakanth, J J (2017) Improvement of Productivity in TIG Welding Plant by Equipment Design in Orbit. IOP Conference Series: Materials Science and Engineering, 183. 012020. ISSN 1757-8981

Ramasubramanian, S. and Manavalan, S and Gnanavel, C. and Balakrishnan, G (2017) Processing Of Neem And Jatropha Methyl Esters –Alternative Fuels From Vegetable Oil. IOP Conference Series: Materials Science and Engineering, 183. 012036. ISSN 1757-8981

Gnanavel, C. and Saravanan, R and Chandrasekaran, M. and Pugazhenthi, R. (2017) Restructured review on Electrical Discharge Machining - A state of the art. IOP Conference Series: Materials Science and Engineering, 183. 012015. ISSN 1757-8981

Jacob, S and Shajin, S and Gnanavel, C. (2017) Thermal analysis on Al7075/Al 2 O 3 metal matrix composites fabricated by stir casting process. IOP Conference Series: Materials Science and Engineering, 183. 012010. ISSN 1757-8981