Items where Subject is "Manufacturing Technology"

Article

Ahmed Ghias, Siddique and Ramnath, Vijaya and Elanchezhian, C. and Siddhartha, D. and Ramana, N. (2019) Analysis of The Friction Welding Mechanism of Low Carbon Steel –Stainless Steel And Aluminium – Copper. Materials Today: Proceedings, 16. pp. 766-775. ISSN 22147853

Ahmed Ghias, Siddique and Vijaya Ramnath, B. and Elanchezhian, C. and Siddhartha, D. and Ramanan, N. (2019) Wear analysis of Sintered Al-B4C Composite. Materials Today: Proceedings, 16. pp. 481-487. ISSN 22147853

Anbarasu, Naveen Arasu and Keshav, Lakshmi and Raja, Kalyana Chakravarthy Polichetty and Sivakumar, Vivek (2024) Unraveling the flexural behavior of concrete and compare with innovative fea investigations. Matéria (Rio de Janeiro), 29 (4). ISSN 1517-7076

Arunkumar, D. and Ramu, M. and Murugan, R. and Kannan, S. and Arun, S. and Baskar, S. (2020) Investigation of heat transfer of wall with and without using phase change material. Materials Today: Proceedings, 33. pp. 2646-2650. ISSN 22147853

D., Vivekanandan and M., Sakthivel and S., Srinivasa Moorthy and Ajith Arul Daniel, S. (2019) Fabrication and characterization of TiO 2 particulate filled agave Americana fiber-reinforced polyester resin composites. Pigment & Resin Technology, 48 (6). pp. 533-539. ISSN 0369-9420

Francis Xavier, Kavin and Devi, Kabirdoss and Seetharaman, Chandramouli and Mani, Kotteeswaran and Veeramani, Ganesan and Murali Thiyagarajan, Vinoth Kumar (2024) Monitoring the Manufacturing Operation Process Data through the Cloud Database. Journal of Advanced Research in Applied Sciences and Engineering Technology, 50 (1). pp. 276-285. ISSN 2462-1943

Gnanavel, C. and AMJATH, Z. A. and GANESA MOORTHY, R and Ashraff Ali, K.S. (2025) MACHINE LEARNING-BASED PREDICTION OF SURFACE CHARACTERISTICS AND TOOL WEAR IN Mg–AZ91D MILLING UNDER DISTINCT CONDITIONS. Surface Review and Letters. pp. 1-18. ISSN 0218-625X

Jeya Jeevahan, J. and Chandrasekaran, M. and Venkatesan, S.P. and Sriram, V. and Britto Joseph, G. and Mageshwaran, G. and Durairaj, R.B. (2021) Scaling up difficulties and commercial aspects of edible films for food packaging: A review. Trends in Food Science & Technology, 100. pp. 210-222. ISSN 09242244

Kathirvel, M. and Chandrasekaran, M. (2025) Predictive Maintenance and Energy Optimization with AI-Driven IoT Framework in Textile Manufacturing Industry. International Journal of Computational and Experimental Science and Engineering, 11 (2). pp. 2408-2422. ISSN 2149-9144

Kumar, Indradeep and Dhanasekaran, C (2019) Computational Modelling Of Nano-Composites (Single Walled Carbon Nanotubes) For Engine. Materials Today: Proceedings, 18. pp. 4210-4216. ISSN 22147853

Kumar, R. and Jesudoss Hynes, N. Rajesh (2019) Thermal drilling processing on sheet metals: A review. International Journal of Lightweight Materials and Manufacture, 2 (3). pp. 193-205. ISSN 25888404

Kumar, R. and Jesudoss Hynes, N. Rajesh and Pruncu, Catalin Iulian and Jennifa Sujana, J. Angela (2019) Multi-objective optimization of green technology thermal drilling process using grey-fuzzy logic method. Journal of Cleaner Production, 236. p. 117711. ISSN 09596526

Madhu Sudhan Reddy, V and Arul Peter, A (2022) REVIEW AND ANALYSIS ON RESISTANCE SPOT WELDED JOINTS OF STAINLESS-STEEL ALLOY USING MULTIOBJECTIVE OPTIMIZATION. International Education & Research Journal, 8 (7). pp. 14-194. ISSN 2454-9916

Muthuraman, V and Chandrasekaran, M. and Dhansekaran, C. and Arunkumar, S. Investigation on influence of cutting forces in evaluating performance in machining of 7075 aluminium alloy with cryogenic liquid nitrogen as a coolant. International Journal of Mechanical and Production Engineering Researchh and Development, 8 (3). pp. 1322-1328. ISSN 2249-8001

Nepoleon, V and Prakash, P. (2018) EXPERIMENTAL STUDY OF DIFFUSION BONDING/SUPERPLASTIC FORMING OF DISSIMILAR ALUMINIUM ALLOYS. International Journal of Recent Trends in Engineering & Research, 4. ISSN 2455-1457

Niranjan, Raja R. and Junaid Kokan, S. and Sathya Narayanan, R. and Rajesh, S. and Manickavasagam, V.M. and Ramnath, B. Vijaya (2013) Fabrication and Testing of Abaca Fibre Reinforced Epoxy Composites for Automotive Applications. Advanced Materials Research, 718-72. pp. 63-68. ISSN 1662-8985

Niranjan, S. and Chandrasekaran, M (2025) Implementation of Lean Manufacturing Using MCDM-TOPSIS Approach in Switch Gear Manufacturing Industry. International Journal of Mechanical Engineering, 12 (6). pp. 62-70. ISSN 23488360

Padmanabhan, S. and Vinod Kumar, T. and Senthilkumar, J and Kumar, K.M. and Nachippan, N.M and Muthiya, S.J (2026) Study of Influential Process Parameters in Abrasive Water Jet Machining of Aluminium 6061-T6 Alloys. Study of Influential Process Parameters in Abrasive Water Jet Machining of Aluminium 6061-T6 Alloys, 18 (1). pp. 67-72. ISSN 0975-3540

Parthiban, A. and Sathish, S. and Ravikumar, R. and Prakash, P. (2020) Experimental investigation and fuzzy logic modelling of CO<SUB align="right">2 laser cutting parameter for AA6061-T6 sheet. International Journal of Rapid Manufacturing, 9 (1). p. 48. ISSN 1757-8817

Prabhu, P. and Chokkalingam, V. and Arunkumar, S. and Perumal, Prakash (2024) The investigation on mechanical, thermal conductivity and water absorption characteristics of coir fiber-reinforced vinyl ester biocomposites. Biomass Conversion and Biorefinery. ISSN 2190-6815

Prakash, P. and Sivaganesan, S. and Dhanasekaran, C. and Parthiban, A. (2018) VEHICLE OVERTAKING ASSISTANCE SYSTEM. International Journal of Management, Technology And Engineering, 8. pp. 4683-4687. ISSN 2249-7455

Pugazhenthi, R. and Sridhar, R. and Gnanavel, C. and Subithalini, K. (2024) Comparison of mechanical stability and morphology study between tree fibres and shrub fibres reinforced epoxy bio-composites. Materials Today: Proceedings, 108. pp. 304-310. ISSN 2214-7853

Pugazhenthi, Rajagopal and Saravanan, R and Chandrasekaran, M. and Franklin Issac, R. (2017) Optimization of wheel axle plant manufacturing environment by simulation. Optimization of wheel axle plant manufacturing environment by simulation. pp. 2412-2417. ISSN ARPN Journal of Engineering and Applied Sciences

Rahman, M. Adeelur and Kumar, S.D. and Pugazhenthi, R. (2024) Design Optimization and Experimental Investigation on Friction Stir Welded Aluminium Alloys and its Mechanical Characteristics. International Journal of Vehicle Structures and Systems, 16 (6). ISSN 0975-3060

Rajesh, S. and Saravanan, R. and Sekar, C.B. and Gnanavel, C. and Malladi, Avinash and Nagarathi, D.K. (2022) Comparing green Machining and clean technology based Machining for tool wear reduction in Machining SAE 1045 steel. Materials Today: Proceedings, 62. pp. 1308-1313. ISSN 22147853

Ramnath, B. Vijaya and Kumar, C. Suresh and Mohamed, G. Riyaz and Venkataraman, K. and Elanchezhian, C. and Sathish, S. (2014) Analysis of Occupational Safety and Health of Workers by Implementing Ergonomic Based Kitting Assembly System. Procedia Engineering, 97. pp. 1788-1797. ISSN 18777058

Ramnath, B. Vijaya and Venkataraman, K. and Venkatram, Selvaraj and Thomas, Sohil and Maheshwaran, Muthukumarasamy and Dinesh, N. (2014) Powered Two-Wheeler with Integrated Safety Using Recurdyn Multi-Body Dynamics. Applied Mechanics and Materials, 591. pp. 193-196. ISSN 1662-7482

Ramya, G. and Chandrasekaran, M. (2014) Shuffled frog leaping algorithm approach to employee timetabling and job shop scheduling. International Journal of Internet Manufacturing and Services, 3 (3). p. 178. ISSN 1751-6048

Ramya, G. and Chandrasekaran, M. (2014) Shuffled frog leaping algorithm approach to employee timetabling and job shop scheduling. International Journal of Internet Manufacturing and Services, 3 (3). pp. 178-202. ISSN 1751-6048

Rathnakaran, Abilash and Muraliraja, R. and Shaisundaram, V S (2025) Electroless Ni–P–TiO₂ Nanocomposite Coatings for Enhanced Durability and Saltwater Corrosion Protection of Jet Ski Engine Components. Journal of Environmental Nanotechnology, 14 (3). pp. 685-691. ISSN 2279-0748

Ruban, M. and Sivaganesan, S. and Dhanasekaran, C and Karikalan, L (2018) SOLAR ENERGY STORAGE BY USING PCM MATERIALS WITH FOUCUSING LENS. International Journal of Management, Technology And Engineering, 8 (12).

Ruban, M. and Sivaganesan, S. and Dhanasekaran, C. (2018) Experimental Investigation on Straight Through Solar Salt Water Desalination System Analysis in Different PCM Materials. International Journal of Mechanical and Production Engineering Research and Development, 8 (3). pp. 67-80. ISSN 2249-6890

Sathish, T. and Saravanan, R. and Arunachalam, S. Jothi and Parthiban, A. (2024) Flexural properties of jute/kenaf/glass fibre reinforced nano-composite. Interactions, 245 (1). ISSN 3005-0731

Sathishkumar, G. and Chandrasekaran, M. and Vinod Kumar, T. and Vivek, P. (2018) Vibration and damping characteristics of sisal and glass fiber reinforced polyester composite. International Journal of Engineering & Technology, 7 (2).

Sathishkumar, G. and Devi, A. Uma and Reddy, M. Prem Kumar and Kanthe, Vishvanath N. and Palaniswamy, D. and Kalyana Chakravarthy, P. R. and Dubey, M. and Majumder, Himadri and Srivastava, Ashish Kumar (2025) Experimental study on mechanical performance and microstructural characterization of optimized sisal fiber reinforced polyester composites. Scientific Reports, 15 (1). pp. 1-26. ISSN 2045-2322

Shanmugavel, P. and Bhaskar, G. B. and Chandrasekaran, M. and Srinivasan, S.P (2014) Determination of Stress Intensity Factors and Fatigue Characteristics of Al-SiC Composite Material and Al-SiC Functionally Graded Material by Simulation. International Review of Mechanical Engineering (IREME), 8 (6). p. 1017. ISSN 1970-8734

Sivabalan, S. and Sridhar, R. and Sathishkumar, G. (2022) Study on mechanical behaviour of friction stir welded 6082-T6 aluminium alloys. Materials Today: Proceedings, 69. pp. 944-949. ISSN 22147853

Sivabalan, S. and Sridhar, R. and Sathishkumar, G. and Prakash, M. (2019) Mechanical Behaviour of Friction Stir Welded Dissimilar Aluminium Alloy AA 6082 and AA 2014. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Sonawane, Pavankumar Ravindra and Chandrasekaran, M. (2021) Investigation of gear pitting defect using vibration characteristics in a single-stage gearbox. The International Journal of Electrical Engineering & Education, 57 (3). pp. 272-278. ISSN 0020-7209

Sudhagar, S. and Sakthivel, M. and Ajith Arul Daniel, S. (2021) Application of image processing to radiographic image for quantitative assessment of friction stir welding quality of aluminium 2024 alloy. Measurement, 152. p. 107294. ISSN 02632241

Sundaram, N. Kalyana and Richard, Titus and Chaudhari, M.B. and Varshney, Neeraj and Velusudha, N.T. and Jain, Naveen and Tharmar, S. and Navven, K.P. and Guru Jawahar, J. and Ramya, K. and Pragathi, B. (2024) Optimization of Gearless Wind Power Conversion Systems: Reducing Mechanical Losses and Improving Reliability. E3S Web of Conferences, 591. 02001. ISSN 2267-1242

Suresh, Ganta and Vinod Kumar, T. and Muraliraja, R. and Padmanabhan, S. (2025) Predictive Optimization of Electroless Coating Parameters for AH36 Steel in Defence Marine Applications. Journal of Environmental Nanotechnology, 14 (4). pp. 209-218. ISSN 2279-0748

Suresh, Ganta and Vinod Kumar, T. and Muraliraja, R. and Padmapriya, A. and Rajasekar, J. and Arunkumar, S. (2026) Plant-Derived Nanoparticles for Advanced Ni–P–TiO2 Composite Coatings on AH36 Marine Steel. Plant-Derived Nanoparticles for Advanced Ni–P–TiO2 Composite Coatings on AH36 Marine Steel, 11 (5). pp. 1-10. ISSN 23656549

Udaiyakumar, K.C. and Chandrasekaran, M. (2014) Application of Firefly Algorithm in Job Shop Scheduling Problem for Minimization of Makespan. Procedia Engineering, 97. pp. 1798-1807. ISSN 18777058

Udayakumar, M. and Sivaganesan, S. and Sivamani, S. (2022) Performance and emissions of lemon peel oil biodiesel powered single cylinder direct injection diesel engine loaded with ceria nanoparticles additives and stabilized zirconia coating. Materials Today: Proceedings, 66. pp. 1994-2000. ISSN 22147853

Vairavel, M. and Pughazhenthi, R. and Girimurugan, R. and Vinothkumar, S. and Poornachandiran, N. (2021) Effects of wear characterization analysis of the friction stir welded joints in aluminum alloy Al3116-Cu and A384 - Cu. Effects of Wear Characterization Analysis of the Friction Stir Welded Joints in Aluminum Alloy Al3116-Cu and A384 - Cu. 020112.

Vijaya Ramnath, B. and Manickavasagam, V.M. and Elanchezhian, C. and Vinodh Krishna, C. and Karthik, S. and Saravanan, K. (2014) Determination of mechanical properties of intra-layer abaca–jute–glass fiber reinforced composite. Materials & Design, 60. pp. 643-652. ISSN 02613069

Vijayaraghavan, P. and Janakiraman, V. and Surulivel rajan, T. and Logesh, K. and Rajiv Gandhi, N. and Gnanavel, C. and Sathish Kumar, G. (2022) Analysis of titanium coated silencer exhaust gas emission in automobile vehicle using artificial neural network. Materials Today: Proceedings, 69. pp. 732-738. ISSN 22147853

Vinod Kumar, T. and Chandrasekaran, M. (2018) EVALUATION OF MECHANICAL PROPERTIES ON NANO CARBON WITH FIBER REINFORCED POLYMER MATRIX COMPOSITES. International Journal of Mechanical Engineering and Technology (IJMET), 9 (13). pp. 157-171. ISSN 0976-6359

Vinod Kumar, T. and Chandrasekaran, M. (2018) EVALUATION OF THERMAL AND CHEMICAL PROPERTIES ON NANO CARBON WITH FIBER REINFORCED POLYMER MATRIX COMPOSITES. International Journal of Mechanical Engineering and Technology (IJMET), 9 (13). pp. 172-181. ISSN 0976-6359

Vinothkumar, M. and Kirubadurai, B. and Jaganraj, R. and Jegadeeswari, G. and Pugazhenthi, R. and Manikandan, G. (2025) Sustainable composite materials for UAVs: An analysis of Morinda citrifolia and Tamarindus indica bio-fibres. International Review of Applied Sciences and Engineering. ISSN 2062-0810

Yaduwanshi, Deepak Kumar and Rao, Chennu Rama Mohan and Naidu, S. C. V. Ramana Murty and Sakharwade, Sanjay G. and Sharma, Sumit and Khalkar, V. and Baskar, S. and Kaliyaperumal, Gopal (2024) Thermal evaluation of aluminum welding: a comparative study of friction stir welding (FSW), plasma-fsw, and tungsten inert gas (TIG)-FSW techniques. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (8). pp. 5501-5513. ISSN 1955-2513

Book Section

Arthur Jebastine Sunderraj, D. and Ananthapadmanaban, D. and Arun Vasantha Geethan, K. and Vijayananth, S. (2019) Correlation Between Mechanical Properties and Microstructure of Fe-Ti-Zn Alloys Fabricated by Powder Metallurgy. In: Advances in Micro and Nano Manufacturing and Surface Engineering Proceedings of AIMTDR 2018. Springer, pp. 319-327.

Arulandu, V. Noble and Muthuraman, V. and Dhanasekaran, C. and Chandrasekaran, M. (2024) Experimental Comparison of Mechanical Stability and Morphology Between Tree Fibres and Shrub Fibres Reinforced Epoxy Bio-Composites. In: Advances in Additive Manufacturing Technologies. Taylor & Francis Group,, pp. 156-160. ISBN 978-1-032-90013-1

Arunkumar, S. and Chandrasekaran, M. and Muthuraman, V. and Vinod Kumar, T. (2024) Optimization of Stirrer Speed on the Mechanical Properties of Aluminium Graphite Stir Cast Composite. In: Recent Developments in Mechanical Science and Automotive Technology. 978-81-9807923-7 ed. SCIENTIFIC RESEARCH REPORTS.

Arunkumar, S. and Sivaram, A.R and Prakash, P. and Venugopal, S (2026) Recent Advances in Mechanical Engineering for Sustainable Industrial Applications. In: Sustainable Advances in Chemical, Mechanical, and Bio-Engineering (2026). SRR.

Baskar, S. and SivaramKrishnan, M and Sivakumar, V and Surendar, S and Gopalakrishnan, K (2025) Mechanical and Thermal Evaluation of Nanocomposite Coatings for Wheelchair Components. In: Frontiers of Multidisciplinary Studies for Global Sustainability. SRR. ISBN 978-81-993402-7-5

Kumudham, R. and Sathish Kumar, P. and Rajendran, V. and Jagan Mugesh, M. S. and Charan Raj, U. (2022) Multiresolution Representation of SONAR Pipeline Image Using Pyramidal Transforms. In: Proceedings of International Conference on Power Electronics and Renewable Energy Systems. Springer, pp. 479-489.

Priya, R. and Gnanavel, C. and DIMPLE, JUNEJA and THANIKASALAM, A (2026) Interdisciplinary Studies in Bioinformatics and Mechanical Systems. In: Interdisciplinary Studies in Bioinformatics and Mechanical Systems. SCIENTIFIC RESEARCH REPORTS. ISBN 978-81-996683-5-5

Ramar, Kumar and Gebremicheal, Gedion Habtay and Andemariam, Ghebremlak and Weldegebriel, Lewhat Michael and Woldu, Hurui Tesfalem and Suyamburajan, Vijay Ananth and Daniel, Ajith Arul (2025) A Review on Selective Laser Melting of Aluminium Metal Matrix Composites. In: Fundamentals and Advances in Metal Matrix Composites. CRC Press, Boca Raton, pp. 79-89. ISBN 9781003499718

Sathish Kumar, G. and Sridhar, R. and Gnanavel, C. (2024) ADVANCED APPLICATIONS AND PROPERTIES OF HYDROCERAMICS. In: Smart Materials and Structures in mechanical Engineering. Imaginex Inks Publication, pp. 110-120. ISBN 978-81-970654-4-6]

Shaisundaram, V S and Sridhar, R. and Muraliraja, R. and Vinod Kumar, T. (2025) A COMPREHENSIVE REVIEW OF NANO ADDITIVES APPLICATIONS FOR ENHANCING PALM BIODIESEL PERFORMANCE IN INTERNAL COMBUSTION ENGINE. In: International Conference on Scientific Research and Revolution. SCIENTIFIC RESEARCH REPORTS, CHENNAI, p. 85. ISBN 978-93-7361-744-2

Shaisundaram, V S and Sridhar, R. and Muraliraja, R. and Vinod Kumar, T. and Sathish, C. (2025) A Comprehensive Review of Nano additives Applications for Enhancing Palm Biodiesel Performance in Internal Combustion Engine. In: Advancing Technology with Multidisciplinary Innovation for Sustainable Growth. SCIENTIFIC RESEARCH REPORTS, CHENNAI, pp. 63-71. ISBN 978-81-987134-9-0

Suyamburajan, Vijay Ananth and Jayaseelan, V. and Chandramohan, P. and Kumar, R. (2022) Mechanical Properties of Nanometal Matrix Composites Produced by Duralcan Process. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 1121-1128.

Vinod Kumar, T. and Muraliraja, R. and Chandrasekaran, M. and Padmanabhan, S. (2025) Sustainable Development through Natural Fiber Composites: Materials, Properties, and Applications. In: Interdisciplinary Approaches to Science and Management for Innovative Development. SCIENTIFIC RESEARCH REPORTS, CHENNAI, pp. 67-87. ISBN 978-81-987134-5-2

Vinod Kumar, T. and Muraliraja, R. and Padmanabhan, S. and Deepak, J. R. (2025) Nanocoating Technologies for Mechanical Systems:Advancements in Protection, Functionality, and Heat Resistance. In: Advancing Technology with Multidisciplinary Innovation for Sustainable Growth. SCIENTIFIC RESEARCH REPORTS, CHENNAI, pp. 104-117. ISBN 978-81-987134-9-0

Conference or Workshop Item

Ajith Arul Daniel, S. and Velu, P. Shenbaga and Kumar, R. and Ananth, S. Vijay (2021) Numerical analysis of single cylinder engine crankshaft. In: PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING: ICRTMME 2019, 12–13 December 2019, Chennai, India.

Mallieswaran, K. and Agaramudhalvan, S. and Nithya, R. and Shuruti, R. and Radhika, S. (2024) Design and Implementation of Advanced Safety Features in Two-Wheeled Vehicles for Accident Prevention and Anti-Theft System. In: Automotive Technical Papers, Warrendale, Pennsylvania, United States.

Murugan, Suganiya and Jerritta, S and Arun, S (2019) Analysis of Different Measures to Detect Driver States: A Review. In: 2019 IEEE International Conference on System, Computation, Automation and Networking (ICSCAN), Pondicherry, India.

Sathish, K and Baskar, S. and Hariharasakthisudhan, P and Logesh, K. and Sathickbasha, K (2025) Wear Performance and Optimization of hBN-Modified AZ91/TiB₂ Magnesium Composites Under Dry Sliding Conditions. In: International Conference on Advanced Materials for Susutainable Future (ICAMSF-2025) 28th- 29th March, 2025.