Items where Subject is "Machine Design"

A

Ajith, Arul Daniel S. and Dhanasekeran, C. and Sivaganesan, S. and Sridhar, R. (2021) Investigation on the Mechanical Properties of Silicon Carbide Particulates in Al/SiC/MoS₂. Materials Science Forum, 979. pp. 89-94. ISSN 1662-9752

Ali, Hussain and Muthudoss, Prakash and Chauhan, Chirag and Kaliappan, Ilango and Kumar, Dinesh and Paudel, Amrit and Ramasamy, Gobi (2023) Machine Learning-Enabled NIR Spectroscopy. Part 3: Hyperparameter by Design (HyD) Based ANN-MLP Optimization, Model Generalizability, and Model Transferability. AAPS PharmSciTech, 24 (8). ISSN 1530-9932

Amuthan, T. and Saravanan, R. and Gnanavel, C. and Manikandan, R. and Jagadeeswaran, P. and Anbuchezhiyan, G. and Ganesh, M. (2023) Cutting zone temperature reduction in by using novel nanofluid in SAE1144 machining. Materials Today: Proceedings. ISSN 22147853

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Rathinam, V. and Nagireddy, Madhavi (2022) Reconnoitering the influence of nanofluid of Nano- alumina particles enriched waste coconut oil in Machining SAE 1045 shaft on modification Surface finish. Materials Today: Proceedings, 64. pp. 661-666. ISSN 22147853

Arulmozhi, P. and Chandrasekaran, M. and Padmanabhan, S. (2014) Multi Objective Optimization for Spur Gear Design Using Sheep Flocks Heredity Model Algorithm. Applied Mechanics and Materials, 591. pp. 68-71. ISSN 1662-7482

B

Babu, S. Senthil and Dhanasekaran, C. (2022) Comparative analysis of thrust force, roughness and roundness error in drilling of aluminium composites using RSM, ANN and fuzzy logic. Materials Today: Proceedings, 69. pp. 908-917. ISSN 22147853

C

Charulakshmi, T. and Chandran, M. (2022) A Relationship Between Ethnocentrism and Purchase Decision Pattern of Consumer in Chennai City. International Journal of Professional Business Review, 7 (5). e0809. ISSN 2525-3654

D

Dhanasekaran, C. and Mohankumar, G. (2014) Hydrogen Gas in Diesel Engine Using DEE as Ignition Source. Applied Mechanics and Materials, 591. pp. 150-154. ISSN 1662-7482

Dhivya, R S and Sujatha, P Employee Performance Prediction for Workforce Planning using Ensemble Hybrid Model. Employee Performance Prediction for Workforce Planning using Ensemble Hybrid Model.

Dinesh, S. and Parameshwaran Pillai, T. and Parthiban, A. and Rajaguru, K. (2021) Modelling of WEDM process for machining ASTM 52100 steel. Materials Today: Proceedings, 37. pp. 1103-1106. ISSN 22147853

Dinesh Kumar, S. and Ponraj Sankar, L. and Sathish, T. and Vijayan, V. and Parthiban, A. and Kamalakannan, R. and Rajkumar, S. and Chelladurai, Samson Jerold Samuel (2021) [Retracted] Improving the Mechanical Properties of Natural Fiber Composites of Hemp Fiber with Ramie and Banana Fiber through Compression Molding Method. Advances in Materials Science and Engineering, 2021 (1). ISSN 1687-8434

G

Girimurugan, R. and Pugazhenthi, R. and Suresh, T. and Maheskumar, Pon. and Vairavel, M. (2021) Prediction of mechanical properties of hybrid aluminium composites. Materials Today: Proceedings, 39. pp. 712-716. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Malladi, Avinash and Sekar, C.B. and Rajesh, S. and Nagarathi, D.K. (2022) Feed force based optimization of process parameters by bio-nanofluid for machining SAE 1045 steel. Materials Today: Proceedings, 62. pp. 1319-1324. ISSN 22147853

Gopalakrishnan, T and Raja, M and Jothi Prakash, V M and Gnanavel, C (2017) Design and Fabrication of E-Glass /carbon/graphite epoxy hybrid composite leaf spring. IOP Conference Series: Materials Science and Engineering, 183. 012004. ISSN 1757-8981

H

Hariharan, Chandran and parthiban, Alagesan and Thanikodi, Sathish (2024) Investigating indispensable characteristics of Boehmeria nivea and Agave sisalana fiber–reinforced epoxy hybrid composites for particle board applications. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Hynes, N. Rajesh Jesudoss and Kumar, R. (2018) Electrochemical Machining of Aluminium Metal Matrix Composites. Surface Engineering and Applied Electrochemistry, 54 (4). pp. 367-373. ISSN 1068-3755

K

Kishor Tirumanur Shanmugavelu, Arvind and Muraliraja, R. and Shanmugam, Ragavanantham and Pal Singh Pawar, Mayur and Vishwakarma, Rajoo and Sarkar, Proshanta (2023) Design of Subsea storage tanks for Arctic conditions - heat treatment of materials. Materials Today: Proceedings. ISSN 22147853

Kumar, Indradeep and Dhanasekaran, C. (2019) A Review on Nano-Casing Of Jet Engine And Diesel Engine Using Single-Walled Carbon Nanotubes. Materials Today: Proceedings, 18. pp. 5464-5471. ISSN 22147853

Kumar, R. and Hynes, N. Rajesh Jesudoss and Senthamaraikannan, P. and Khan, Anish and Rangappa, Sanjay Mavinkere and Siengchin, Suchart and Bharathi, S.R. Sundara and Asiri, Abdullah Mohamed and Khan, Imran (2020) Self-repairing fiber polymer composites: mechanisms and properties. In: Self-Healing Composite Materials. Elsevier, pp. 71-85.

Kumar, Sujeet and Karnwal, Sandeep and Swami, Sujeeth and Punitha, N. and Padmanabhan, S. and Vijayan, V. and Baskar, S. and Vijayan, V. and Senthil Kumar, T.S. (2023) A Sustainable Development Perspective and Evaluating the Impact of Laser Cladding Parameters on Mild Steel. E3S Web of Conferences, 399. 03013. ISSN 2267-1242

M

Malligarjunan, S. and Chandrasekaran, M. and Bhaskar, G.B. (2021) Investigation on the effect of support structure space in determining optimal part orientation using a generic algorithm. International Journal of Manufacturing Technology and Management, 35 (6). p. 527. ISSN 1368-2148

Manickavelan, K. and Sivaganesan, S. and Sivamani, S. and Kulkarni, Mithun V. (2024) Response Surface Optimization of Brake Thermal Efficiency and Specific Fuel Consumption of Spark-Ignition Engine Fueled with Gasoline–Pyrooil and Gasoline–Pyrooil–Ethanol Blends. SAE International Journal of Fuels and Lubricants, 18 (1). ISSN 1946-3952

Murali, Sivanesan and Pugazhendhi, Singaram and Muralidharan, Chandrasekaran (2016) Assessment of impact of after sales service attributes on customer satisfaction for a home-appliances manufacturing firm. International Journal of Enterprise Network Management, 7 (1). p. 27. ISSN 1748-1252

Muthuraman, P. and Karunakaran, K. (2022) Al–Fe Alloy Connecting Rod—A Choice for Power Amplification in IC Engines. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 1055-1062.

N

Natarajan, Senniangiri and Pathinettampadian, Gurusamy and Vadivel, Muthuraman and Yesudasan, Pastin Sony Sundar and Jesuretnam, Bensam Raj (2022) Influence of nano-silica on mechanical properties of Indian almond fiber reinforced hybrid epoxy composites. Journal of Natural Fibers, 19 (15). pp. 12004-12014. ISSN 1544-0478

P

Padmanabhan, S. and Srinivasa Raman, V. and Chandrasekaran, M. (2014) Optimisation of gear reducer using evolutionary algorithm. Materials Research Innovations, 18 (sup6). S6-378-S6-383. ISSN 1432-8917

Poornachandiran, N. and Pugazhenthi, R. and Vijay Ananth, S. and Krishnan, T. Gopala and Vairavel, M. (2021) Investigation of mechanical properties of Al6061 with reinforcement of SiC/B4C metal matrix composites. Investigation of Mechanical Properties of Al6061 with Reinforcement of SiC/B4C Metal Matrix Composites. 020113.

Prakash, Paramasivam and Dhanasekaran, Chinnathambi (2023) Influencing parameter optimisation of CRDI engine fuelled with lemongrass biodiesel blends. International Journal of Ambient Energy, 44 (1). pp. 719-738. ISSN 0143-0750

R

Radha Krishnan, B. and Sudarsan, D. and Sanjeevi, R. and Parthiban, A. and Eswara Prasath, N. and Arun Prasath, K. (2024) Formability and Strength Enhancement of AA7075 Sheets by Cryorolling and Post-Treatment. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

S

S, Muzeer and Sivaganesan, Dr.S. (2022) Tribological behaviour of aluminium based hybrid metal matrix composites (Al6061/B4C/ZrO2/SiC). Materials Today: Proceedings, 56. pp. 507-513. ISSN 22147853

S, Venkatesan and P. K., Giridharan and N S, Sivakumar and S, Sharavanan and Subbiah, Ram and A, Senthamilselvi (2022) Tribological behaviour of AA7168 hybrid composite sheets for aerospace structures fabricated through COMPO casting. Advances in Materials and Processing Technologies, 8 (sup2). pp. 402-410. ISSN 2374-068X

Samuel, Johnson and Sathish, S. and Parthiban, M. (2021) Performance and analysis of a retrofit electrostatic precipitator before a diesel particulate filter to reduce particulate matter in diesel exhaust system. International Journal of Ambient Energy, 42 (11). pp. 1321-1325. ISSN 0143-0750

Sathish, S and Parthiban, A and Balakrishna, R and Anandan, R (2018) Development of ANN models for optimization of methane yield from floating dome digester. International Journal of Engineering & Technology, 7 (2.21). p. 316. ISSN 2227-524X

Sathish, T. and Premkumar, I. J. Isaac and Saravanan, R. and Basker, Sanjeevi and Parthiban, A. and Vijayan, V. (2021) Multiply of process speed, quality and safety through low-cost automation – A case study. Multiply ofProcess Speed, Quality and Safety through Low- Cost Automation –A Case Study. 020067.

Shaisundaram, V. S. and Chandrasekaran, M. and Mohan Raj, S. and Muraliraja, R. (2020) Investigation on the effect of thermal barrier coating at different dosing levels of cerium oxide nanoparticle fuel on diesel in a CI engine. International Journal of Ambient Energy, 41 (1). pp. 98-104. ISSN 0143-0750

Shaisundaram, V.S. and Chandrasekaran, M. (2021) Investigation of watermelon seed oil biodiesel with Cerium oxide nanoparticle in CI engine. Materials Today: Proceedings, 44. pp. 3633-3637. ISSN 22147853

Sivaganesan, S. and Chandrasekaran, M. (2016) Performance and Emission Analysis of Compression Ignition Engine with Methyl Ester of Jatropha and Diesel. Indian Journal of Science and Technology, 9 (26). ISSN 0974-6846

Sridhar, R. and Baskar, S. and Shaisundaram, V.S. and Karunakaran, K. and Ruban, M. and Joseph Irudaya Raja, S. (2021) Design and development of material behavior of line follower automated vehicle. Materials Today: Proceedings, 37. pp. 2193-2195. ISSN 22147853

Srikanth, Sudhani and Parthiban, A. (2020) Microstructural analysis of Nd:YAG laser welding for Inconel alloy. Materials Today: Proceedings, 21. pp. 568-571. ISSN 22147853

Srikanth, Sudhani and Parthiban, A. and Vijayan, V. and Dinesh, S. and Sathish, S. (2021) Experimental Investigation of Nd:YAG Laser Welding of Inconel 625 Alloy Sheet. In: Lecture Notes in Mechanical Engineering. springer, pp. 377-386.

U

Udaya Kumar, M. and Sivaganesan, S. and Dhanasekaran, C. and Parthiban, A. (2022) Analysis of performance, combustion and emission parameters in di diesel engine by using mahua methyl ester along with nano metal additives titanium dioxide. Materials Today: Proceedings, 37. pp. 3404-3410. ISSN 22147853

V

Venkatesh, R. and Das, A. Daniel and Kamatchi, R. Muthu and Kaliyaperumal, Gopal and Ajin, M. and Shanmugam, Rajasekaran (2024) Synthesis and Functional Behavior of Sisal Fiber-Incorporated Epoxy Hybrid Nanocomposite Enriched by Nano-SiC. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

Vijaya Ramnath, B. and Junaid Kokan, S. and Niranjan Raja, R. and Sathyanarayanan, R. and Elanchezhian, C. and Rajendra Prasad, A. and Manickavasagam, V.M. (2013) Evaluation of mechanical properties of abaca–jute–glass fibre reinforced epoxy composite. Materials & Design, 51. pp. 357-366. ISSN 02613069

Vijaya Ramnath, B. and Sharavanan, R. and Chandrasekaran, M. and Elanchezhian, C. and Sathyanarayanan, R. and Niranjan Raja, R. and Junaid Kokan, S. (2015) Experimental determination of mechanical properties of banana jute hybrid composite. Fibers and Polymers, 16 (1). pp. 164-172. ISSN 1229-9197

Vinod Kumar, T and Chandrasekaran, M and Mohanraj, P and Balasubramanian, Ravishankar and Muraliraja, R and S. Shaisundaram, V (2018) Fillers preparation for polymer composite and its properties – a review. International Journal of Engineering & Technology, 7 (3.3). p. 212. ISSN 2227-524X