Browse by Employee ID

Udhayakumar, K. and Purushothaman, S. and Ravi theja, M.S. and Premnath, S. P. and Karunakaran, D. and Ajith Arul Daniel, S. and Venugopal, S and Sridhar, R. and Baskar, S. (2026) CFD Analysis of Intake Air Swirl Effects on Combustion Efficiency and Emission Reduction in Direct Injection Diesel Engines. EPJ Web of Conferences, 363. 01001. ISSN 2100-014X

Srivastava, Nitin and Yadav, Manoj Kumar and Ajith Arul Daniel, S. and Bhadauria, Alok and Singh, Lavish Kumar (2026) Predicting and optimizing control parameters of stir casting of Al alloy/MWCNT/RHA composite using artificial neural network and Taguchi-Grey relational analysis for multi-objective outcomes. PLOS One, 21 (3). e0343970. ISSN 1932-6203

Ajith Arul Daniel, S. and Parthiban, A. and Sivaganesan, S. and Vijay Ananth, S. (2021) Investigation on Surface Roughness in Drilling of al/SiC/MoS2 Metal Matrix Composites. In: Lecture Notes in Mechanical Engineering. springer, pp. 717-724.

Sivabalan, S. and Sridhar, R. and Ajith Arul Daniel, S. and Sathishkumar, G. (2024) Study of mechanical behaviour & microstructural properties on friction stir welded aluminium alloys 6082 - t6&8011. E3S Web of Conferences, 509. 03012. ISSN 2267-1242

Jayaseelan, V. and Vijayananth, S. and Francis Xavier, J. and Ajith Arul Daniel, S. and Manoj Kumar, Nallapaneni and Jiang, X.X. (2019) Experimental investigation on bi-axial superplastic forming characteristics of AA6063/SiCp with various percentages of SiCp under various temperatures and pressures. Results in Physics, 15. p. 102624. ISSN 22113797

Mohankumar, K. and Pugazhenthi, R. and Ajith Arul Daniel, S. and Sreeram, D. and Vamsi Krishna, Mamidi and Pavan Kishore, M. L. (2025) Metallurgical Bonding, Interfacial Chemistry, and Mechanical Optimization of Dissimilar AA7079–AA6063 Welds via Response Surface Methodology. MALAYSIAN JOURNAL OF CHEMISTRY, 27 (3). ISSN 15112292

Vellaichamy, Ramesh and Pugazhenthi, R. and Ajith Arul Daniel, S. and Selvarani, A. Geetha (2025) Optimizing turning parameters of duralumin nano Cr₂C₃–MoS₂ using ANN and MOORA: A multi-objective approach. Results in Engineering, 27. p. 105978. ISSN 25901230

Hemadri, Kadapa and Ajith Arul Daniel, S. and Kukanur, Vijayendra and Nagaral, Madeva (2024) Determination of wear rate and coefficient of friction of Al6262 reinforced with different weight percentage of WC/MoS2 under dry sliding condition. Research on Engineering Structures and Materials. ISSN 21489807

Prajulraj, P. and Sridhar, R. and Pugazhenhi, R. and Ajith Arul Daniel, S. (2023) Study the End Milling Machinability Properties of Al 6061/WC Aluminium Metal Matrix Composites. Key Engineering Materials, 971. pp. 23-32. ISSN 1662-9795

Ramasamy, Muthukumaran and Ajith Arul Daniel, S. and Nithya, M. (2022) Application of Natural Fiber-reinforced Composites in Additive Manufacturing. In: Functional Composite Materials: Manufacturing Technology and Experimental Application. BENTHAM SCIENCE PUBLISHERS, pp. 123-137. ISBN C. Samson Jerold Samuel M. Suresh S. Gnanasekaran Functional Composite Materials: Manufacturing Technology and Experimental Application 04 18 2022 9789815039894 BENTHAM SCIENCE PUBLISHERS 10.2174/97898150398941220101 https://www.eurekaselect.

Ajith Arul Daniel, S. and Ananth, S. Vijay and Parthiban, A. and Sivaganesan, S. (2020) Optimization of machining parameters in electro chemical machining of Al5059/SiC/MoS2 composites using taguchi method. Materials Today: Proceedings, 21. pp. 738-743. ISSN 22147853

Vijayananth, S. and Ajith Arul Daniel, S. and Muthuraman, R K and Pugazhenthi, R. (2018) ANALYSIS OF MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS IN WEDM OF AL/SIC/MOS2. In: International Journal of Mechanical Engineering and Technology (IJMET). IJMET.

Ajith Arul Daniel, S. and Vijayananth, S. and Pugazhenthi, R. and Muthuraman, R.K. (2018) IMPACT ANALYSIS OF INSAS RIFLE BULLET AGAINST THE VEHICLE ALUMINIUM COMPOSITE ARMOUR PLATE USING LS-DYNA. International Journal of Mechanical Engineering and Technology (IJMET), 9 (11).

Vinod Kumar, T. and Muraliraja, R. and Ajith Arul Daniel, S. and Gnanavel, C. and Muthuraman, V. (2025) Applications of Nano-Coating in Mechanical Systems: Improving Wear, Corrosion, and Performance. In: Emerging Trends in Multidisciplinary Engineering: A Comprehensive Overview,. SCIENTIFIC RESEARCH REPORTS, pp. 101-125. ISBN 978-81-9840066-6

Gopalakrishnan, T. and Vijayananth, S. and Gnanavel, C. and Ajith Arul Daniel, S. and Ashwin, R and Azhagesan, N (2025) Design and Analysis of a Euro-7 13-Litre Heavy Duty Engine Flywheel Housing under Static and Vibration Loads. International Journal of Emerging Science and Engineering, 14 (1). pp. 6-13. ISSN 23196378

Ruban, M and Vijayaraj, S. and Soundarya, M. K. and Sridhar, R. and Karunakaran, K. and Ajith Arul Daniel, S. and Baskar, S. (2022) AI Agents in Modern Manufacturing Systems. Amazon Corporate. ISBN 978-93-343-8460-4

Ajith Arul Daniel, S and Sridhar, R. and Arun Kumar, A and Baskar, S. and Aravind, Y and Venkatesh, D (2025) Development of a Low-Cost Rehabilitation Device for Stroke Patients: ROBO REHEB (MOBAID). In: Advancing Science and Technology through Multidisciplinary Innovation toward the Future. SRR, p. 150. ISBN 978-81-987134-6-9

Ruban, M. and Vijayaraj, S. and Soundarya, M K and Sridhar, R. and Baskar, S. and Karunakaran, K. and Gopalakrishnan, T. and Ajith Arul Daniel, S. and Gnanavel, C. and Muthuraman, V. (2026) Industry 4.0 and the Rise of Artificial Intelligence in Production: Artificial Intelligence in Production. Amazon Kindle.

Ajith Arul Daniel, S. and Saravanan, R. and Rajesh, S. and Kamatchi, T. and Gnanavel, C. and Anbuchezhiyan, G. and Satyanarayana, Gupta (2023) Influence on tensile and yield strength in composites of heat-treated AA6463 alloy by copper oxide nano particles. Material Today Proceeding.

Gnanavel, C. and Gopalakrishnan, T. and Vijayananth, Suyamburajan and Ajith Arul Daniel, S. (2025) INVESTIGATION OF CORROSION BEHAVIOR IN FRICTION STIR WELDED DISSIMILAR MAGNESIUM ALLOYS AZ80A-T5 AND AZ91C-T6. In: International Conference on Advanced Multidisciplinary Research and Innovation (ICAMRI-2025).

Vijay Ananth, S.S. and Sivaganesan, S. and Gnanavel, C. and Gopalakrishnan, T. and Ajith Arul Daniel, S. (2025) A Study in Superplastic Forming in Aluminium Metal Matrix Composites. In: Emerging Trends in Multidisciplinary Technology and Science Vol III. SRR, pp. 50-59. ISBN 978-81-984006-4-2

Padmanabhan, S. and Vinod Kumar, T. and Arunkumar, S. and Ajith Arul Daniel, S. and Vijayananth, Suyamburajan (2021) Promising Recovery Directions for Waste Plastic as an Energy Source: A Brief Overview. In: Current Advances in Geography, Environment and Earth Science. B P International, pp. 1-9. ISBN 978-93-5547-094-2

Vinod Kumar, T. and Arunkumar, S. and Ajith Arul Daniel, S. and Vijayananth, Suyamburajan and Padmanabhan, P (2022) Ethanol Future Fuel for India: An Introduction. In: Techniques and Innovation in Engineering Research Vol. 3. B P International, pp. 1-11. ISBN 978-93-5547-913-6

Ramasamy, Muthukumaran and Ajith Arul Daniel, S. and Nithya, M. and Sathees Kumar, S. and Pugazhenthi, R. (2021) Characterization of natural – Synthetic fiber reinforced epoxy based composite – Hybridization of kenaf fiber and kevlar fiber. Materials Today: Proceedings, 37. pp. 1699-1705. ISSN 22147853

Kukanur, Vijayendra and Ajith Arul Daniel, S. and Sivaganesan, S. and Algur, Veerabhadrappa and Chandrasekaran, M. (2022) Mechanical properties of silicon nitride fortified aluminium based metal matrix composites – A review. Materials Today: Proceedings, 68. pp. 1733-1736. ISSN 22147853

Ajith Arul Daniel, S. and Kumar, R. and Vijayananth, S. and Pugazhenthi, R. and UNSPECIFIED1 (2020) Multi-objective optimization of drilling of Al5059-SiC-2%MoS2 composites using NSGA-II. Materials Today: Proceedings, 22. pp. 853-857. ISSN 22147853

Kumar, S.D. and Pugazhenthi, R. and Ajith Arul Danial, S. and Swaminathan, G. (2021) Optimization of Dissimilar aluminum alloy by Friction stir welding Process Control variables with Multiple Objectives. Journal of Physics: Conference Series, 2040 (1). 012042. ISSN 1742-6588

Sebastian, Sanoop and Suyamburajan, Vijayananth and R, Kumar and Ajith Arul Daniel, S. (2021) Synthesis, processing and finite element analysis of CNT based polymer composites. 020011.

Ganesh, K. and Ajith Arul Daniel, S. and Pugazhenthi, R. and Balamurali, P. (2021) Study the evaluation of underactuated robotic gripper. In: RECENT TRENDS IN MANUFACTURING TECHNOLOGIES, MATERIALS PROCESSING, AND TESTING, 18–19 February 2021, Chennai, India.

Ajith, Arul Daniel S. and Dhanasekeran, C. and Sivaganesan, S. and Sridhar, R. (2021) Investigation on the Mechanical Properties of Silicon Carbide Particulates in Al/SiC/MoS₂. Materials Science Forum, 979. pp. 89-94. ISSN 1662-9752

Rajesh, S. and Saravanan, R. and Kamatchi, T. and Gnanavel, C. and Ajith Arul Daniel, S. and Nagarathi, D.K. (2022) Evaluation on hardness and percentage of elongation discrepancy by Zinc oxide nanoparticles on AA6070 alloy composites. Materials Today: Proceedings, 62. pp. 1921-1924. ISSN 22147853

Ajith Arul Daniel, S. and Velu, P. Shenbaga and Kumar, R. and Ananth, S. Vijay (2021) Numerical analysis of single cylinder engine crankshaft. In: PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING: ICRTMME 2019, 12–13 December 2019, Chennai, India.

Vijay Ananth, S.S. and Udayakumar, A. Ramesh and Ajith Arul Daniel, S. and Poornachandiran, N. (2021) Optimization of machining parameters of Kevlar fibre reinforced composites. Optimization of Machining Parameters of Kevlar Fibre Reinforced Composites. 020117.

Sudhagar, S. and Sakthivel, M. and Ajith Arul Daniel, S. (2021) Application of image processing to radiographic image for quantitative assessment of friction stir welding quality of aluminium 2024 alloy. Measurement, 152. p. 107294. ISSN 02632241

Hemadri, Kadapa and Ajith Arul Daniel, S. and Kukanur, Vijayendra and Vijayananth, S and Kumar, R (2022) Investigation on mechanical characterization of Al/Mos2/WC hybrid composite. Materials Today: Proceedings, 69. pp. 995-999. ISSN 22147853

Saravanan, R. and Gnanavel, C. and Rajesh, S. and Kamatchi, T. and Ajith Arul Daniel, S. and Nagarathi, D.K. and UNSPECIFIED1 and UNSPECIFIED1 (2022) Synthesis of Zinc oxide and CNT in AA7178 aluminium alloy composite impression on characteristics. Materials Today: Proceedings, 62. pp. 1973-1976. ISSN 22147853

Scaria, Clement Tom and Pugazhenthi, R. and Ajith Arul Daniel, S. and Santhosh, K. (2022) Mechanical and Wear Studies on AA7075/Nano TiC/Graphite Hybrid Composites for Tribological Applications. Advances in Materials Science and Engineering, 2022. pp. 1-8. ISSN 1687-8434

Gopalakrishnan, T. and Saravanan, R. and Daniel, S. Ajith Arul (2021) Synthesize and characterization of fly ash based nanocomposites. In: PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING: ICRTMME 2019, 12–13 December 2019, Chennai, India.

Ramasamy, Muthukumaran and Ajith Arul Daniel, S. and M., Nithya (2021) A review on aluminium (Al7050) metal matrix composite characteristics reinforced with titanium. Materials Today: Proceedings, 43. pp. 1720-1723. ISSN 22147853

Hemadri, Kadapa and Ajith Arul Daniel, S. and Parthiban, A. and Vinod Kumar, T. (2022) Investigation on the response parameters in electric discharge machining of developed aluminium metal matrix composites. Materials Today: Proceedings, 68. pp. 1214-1218. ISSN 22147853

Ramasamy, Muthukumaran and Ajith Arul Daniel, S. and Nithya, M. (2022) Investigation on Surface Roughness of Aluminium (Al7050/TiC/BN) Composite Through Wire Electric Discharge Machining. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 933-941.

Kumar, R. and Sivaganesan, S. and Senthamaraikannan, P. and Saravanakumar, S. S. and Khan, Anish and Ajith Arul Daniel, S. and Loganathan, L. (2022) Characterization of New Cellulosic Fiber from the Bark of Acacia nilotica L . Plant. Journal of Natural Fibers, 19 (1). pp. 199-208. ISSN 1544-0478

Saravanan, R. and Gnanavel, C. and Ajith Arul Daniel, S. and Rajesh, S. and Kamatchi, T. and Anbuchezhiyan, G. and Sreekanth, S. (2023) Analysis of mechanical properties enhancement on composites of AA7175 by multi walled carbon nano tube (MWCNT). Materials Today: Proceedings. ISSN 22147853

Kumar, Patnala Padma and Ruban, M. and Ajith Arul Daniel, S. and Pugazhenthi, R. and Santhosh, K. (2023) Influence of Control Parameters during Drilling of Aluminum Reinforced with HNT Hybrid Matrix Composites. Advances in Materials Science and Engineering, 2023. pp. 1-10. ISSN 1687-8434

Ajith Arul Daniel, S. and Pugazhenthi, R. and Kumar, R. and Vijayananth, S. (2019) Multi objective prediction and optimization of control parameters in the milling of aluminium hybrid metal matrix composites using ANN and Taguchi -grey relational analysis. Defence Technology, 15 (4). pp. 545-556. ISSN 22149147

Muthukumaran, R. and Ajith Arul Daniel, S. and Nithya, M. and Parthiban, A. and Sathish, T. and Giri, Jayant and Al-Lohedan, Hamad A. (2024) Characterization on properties of Al7050/TiC/BN hybrid metal matrix composite. AIP Advances, 14 (4). ISSN 2158-3226