Browse by Employee ID

Poornachandiran, N. and Pugazhenthi, R. and Vijay Ananth, S.S. and Krishnan, T. Gopala and Vairavel, M. (2021) Investigation of mechanical properties of Al6061 with reinforcement of SiC/B4C metal matrix composites. Investigation of Mechanical Properties of Al6061 with Reinforcement of SiC/B4C Metal Matrix Composites. 020113.

Vinod Kumar, T. and Arunkumar, S. and Ajith Arul Daniel, S. and Vijayananth, Suyamburajan and Padmanabhan, P (2022) Ethanol Future Fuel for India: An Introduction. In: Techniques and Innovation in Engineering Research Vol. 3. B P International, pp. 1-11. ISBN 978-93-5547-913-6

Padmanabhan, S. and Vinod Kumar, T. and Arunkumar, S. and Ajith Arul Daniel, S. and Vijayananth, Suyamburajan (2021) Promising Recovery Directions for Waste Plastic as an Energy Source: A Brief Overview. In: Current Advances in Geography, Environment and Earth Science. B P International, pp. 1-9. ISBN 978-93-5547-094-2

Vijay Ananth, S.S. and Sivaganesan, S. and Gnanavel, C. and Gopalakrishnan, T. and Ajith Arul Daniel, S. (2025) A Study in Superplastic Forming in Aluminium Metal Matrix Composites. In: Emerging Trends in Multidisciplinary Technology and Science Vol III. SRR, pp. 50-59. ISBN 978-81-984006-4-2

Gnanavel, C. and Gopalakrishnan, T. and Vijayananth, Suyamburajan and Ajith Arul Daniel, S. (2025) INVESTIGATION OF CORROSION BEHAVIOR IN FRICTION STIR WELDED DISSIMILAR MAGNESIUM ALLOYS AZ80A-T5 AND AZ91C-T6. In: International Conference on Advanced Multidisciplinary Research and Innovation (ICAMRI-2025).

Gopalakrishnan, T. and Vijayananth, S. and Gnanavel, C. and Ajith Arul Daniel, S. and Ashwin, R and Azhagesan, N (2025) Design and Analysis of a Euro-7 13-Litre Heavy Duty Engine Flywheel Housing under Static and Vibration Loads. International Journal of Emerging Science and Engineering, 14 (1). pp. 6-13. ISSN 23196378

Silambarasan, P. and Pugazhenthi, R. and Vijayananth, S. and Anbarasu, A. and Vijayaraj, S. and Paled, Maheshwari and Sureshkumar, Myilsamy and Bhuvanesh, N. (2025) Chemometric Optimization of Superplastic Forming Parameters in SiC-Reinforced Aluminium Matrix Composites via Response Surface Methodology. MALAYSIAN JOURNAL OF CHEMISTRY, 27 (3). ISSN 15112292

Raj, S. Hari Krishna and Boopathy, G. and Vijayananth, S. and Balaji, G. and Ramanan, N. (2024) Feasibility and Insights into the Optimization and Characterization of Friction Welded Aluminum–Steel Dissimilar Joints. In: Advances in Science, Technology & Innovation. Springer, pp. 121-129.

Kasinathan, Narendranathan Srinivasan and Suyamburajan, Vijayananth and Veerasundaram, Jayaseelan and Kumarsamy, Sudhakar (2024) CALOPHYLLUM INOPHYLLUM (PUNNAI SEED OIL) DERIVED BIOFUEL BLENDS: THERMAL PERFORMANCE AND ENGINE EMISSIONS. International Journal of Energy for a Clean Environment, 25 (1). pp. 37-50. ISSN 2150-3621

Jayaseelan, V. and Vijayananth, S. and Francis Xavier, J. and Ajith Arul Daniel, S. and Manoj Kumar, Nallapaneni and Jiang, X.X. (2019) Experimental investigation on bi-axial superplastic forming characteristics of AA6063/SiCp with various percentages of SiCp under various temperatures and pressures. Results in Physics, 15. p. 102624. ISSN 22113797

Ajith Arul Daniel, S. and Parthiban, A. and Sivaganesan, S. and Vijay Ananth, S. (2021) Investigation on Surface Roughness in Drilling of al/SiC/MoS2 Metal Matrix Composites. In: Lecture Notes in Mechanical Engineering. springer, pp. 717-724.

Raj, J. Immanuel Durai and Durairaj, R. B. and Ananth, S. Vijay and Meenakshisundaram, Nagaraj (2024) Effect of e‐waste materials as filler in the flax woven fiber reinforced polymer composite for a sustainable environment. Environmental Quality Management, 33 (4). pp. 541-550. ISSN 1088-1913

Ajith Arul Daniel, S. and Pugazhenthi, R. and Kumar, R. and Vijayananth, S. (2019) Multi objective prediction and optimization of control parameters in the milling of aluminium hybrid metal matrix composites using ANN and Taguchi -grey relational analysis. Defence Technology, 15 (4). pp. 545-556. ISSN 22149147

Immanuel Durai Raj, J. and Arun Vasantha Geethan, K. and John Rajan, A. and Vijay Ananth, S. (2023) Characterization of epoxy resin based banana fiber reinforced composite with waste CD powder filler. Materials Today: Proceedings, 90. pp. 19-23. ISSN 22147853

Muraliraja, R. and Suyamburajan, Vijay Ananth and Shaisundaram, V S and Gowsikan, V. and Padmanabhan, S. (2023) Fundamentals of additive manufacturing technology and future outlooks. In: Mechanical Properties and Characterization of Additively Manufactured Materials. CRC Press, Boca Raton, pp. 47-65. ISBN 9781003430186

Anoop, J. and Suyamburajan, Vijay Ananth and Babu, P. Sekhar and Filketu, Sisay Addis (2022) Analysis and Experimental Investigation of A356 Aluminium Alloy Hybrid Composites Reinforced with Gr‐FE 3 O 4 ‐B 4 C Nanoparticles Synthesised by Selective Laser Melting (SLM). Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Sudeshkumar, M. P. and Ramadoss, R. and Jayaseelan, V. and Vijayananth, S. (2023) Preparation and Characterization of Amino-Silanized Opuntia Cladode Fibre and Fumed Silica Toughened Epoxy Composite. Silicon, 15 (6). pp. 2963-2972. ISSN 1876-990X

Hemadri, Kadapa and Ajith Arul Daniel, S. and Kukanur, Vijayendra and Vijayananth, S and Kumar, R (2022) Investigation on mechanical characterization of Al/Mos2/WC hybrid composite. Materials Today: Proceedings, 69. pp. 995-999. ISSN 22147853

Kumar, R. and Senthamaraikannan, P. and Saravanakumar, S.S. and Khan, Anish and Ganesh, K. and Vijay Ananth, S. (2021) Electroactive polymer composites and applications. Electroactive polymer composites and applications. pp. 149-156.

Balajikrishnabharathi, A. and Suyamburajan, Vijayananth and Kaliappan, S. and Patil, Pravin P and Jayabalakrishnan, D. and Sathya Prakash, M. and Sivabalan, T. (2022) Study of mechanical properties on Nano metal matrix Composites: Duralcan process. Materials Today: Proceedings, 62. pp. 1282-1287. ISSN 22147853

Arravind, R. and Kaliappan, S. and Vijayananth, Suyamburajan and Patil, Pravin P. and Sathya Prakash, M. and Ramasamy, N. (2022) An investigation on mechanical properties of AA336/Al2O3 composites by Duralcan process. Materials Today: Proceedings, 62. pp. 1299-1302. ISSN 22147853

Durai Murugan, P. and Vijayananth, S. and Natarajan, M.P. and Jayabalakrishnan, D. and Arul, K. and Jayaseelan, V. and Elanchezhian, J. (2022) A current state of metal additive manufacturing methods: A review. Materials Today: Proceedings, 59. pp. 1277-1283. ISSN 22147853

Jayaseelan, V. and Geethan, Arunvasantha and Xavier, J. Francis and Srimurugan, R. and Vijay Ananth, S. (2021) Optimizations of extrusion semidie angle and fabrication of extrusion die. Optimizations of Extrusion SemiDie Angle and Fabrication of Extrusion Die. 020063.

Srimurugan, R. and Vijay Ananth, S. and Geethan, Arunvasantha and Jayaseelan, V. and Xavier, J. Francis (2021) Experimental investigation on diffusion bonding of dissimilar metals. ExperimentalInvestigation on Diffusion Bonding of Dissimilar Metals. 020062.

Vijay Ananth, S.S. and Udayakumar, A. Ramesh and Ajith Arul Daniel, S. and Poornachandiran, N. (2021) Optimization of machining parameters of Kevlar fibre reinforced composites. Optimization of Machining Parameters of Kevlar Fibre Reinforced Composites. 020117.

Poovazhgan, Lakshmanan and Vijayananth, Suyamburajan and Sivaganesan, S. (2021) Optimizing Ultrasonic Power on Fabricating Aluminum Nanocomposites Reinforced with Boron Carbide Nanoparticles. Materials Science Forum, 979. pp. 28-33. ISSN 1662-9752

Ravikumar, S. and Saravanan, K. and Jayabalakrishnan, D. and Vijayananth, Suyamburajan and Prabhu, P and Jayaseelan, V. and Mayakkannan, A. V. (2022) Silane Grafted Nanosilica and Aramid Fibre-Reinforced Epoxy Composite: DMA, Fatigue and Dynamic Loading Behaviour. Silicon, 14 (6). pp. 2707-2715. ISSN 1876-9918

Ajith Arul Daniel, S. and Kumar, R. and Vijayananth, S. and Pugazhenthi, R. and UNSPECIFIED1 (2020) Multi-objective optimization of drilling of Al5059-SiC-2%MoS2 composites using NSGA-II. Materials Today: Proceedings, 22. pp. 853-857. ISSN 22147853

Pugazhenthi, R. and Sreeram, D. and Vijay Ananth, S.S. and Devaraju, A. (2020) Surface fracture analysis of stir casted AA 6063/TiC/Gr hybrid composites under different solidification rate. Materials Today: Proceedings, 22. pp. 701-704. ISSN 22147853