Browse by Employee ID

Madhavan, T and Arunkumar, S and Sridhar, R and Pugazhenthi, P and Muthuraman, V (2025) The Mechanical Aluminium Graphite Stir Cast Composite's Ability to Improve Stirrer Speed. In: International Conference on Recent Trends in Mechanical Engineering (ICRTME -2025), SEP 24 AND 2025, CHENNAI.

Rajendraprasath, G and Muthuraman, V. and Sridhar, R. and Arunkumar, S. (2025) Performance Evaluation of Cryogenic LN2 Coolant on Surface finish and Chip morphology in Machining 7075 Aluminium alloy. In: International Conference on Recent Trends in Mechanical Engineering (ICRTME -2025), Sep 24 & 25 -2025, VISTAS CHENNAI.

Ali, Zeeshan and Muthuraman, V and Rathnakumar, P. and GURUSAMY, P. and Nagaral, Madeva (2022) Studies on mechanical properties of 3 wt% of 40 and 90 µm size B4C particulates reinforced A356 alloy composites. Materials Today: Proceedings, 52. pp. 494-499. ISSN 22147853

Zeeshan, Ali and Nagaral, Madeva and Sharath Chandra, S. H. and Faiyaz Ahmed, Ansari and Muthuraman, V and Dayanand, Samuel and Auradi, V (2024) Critical Review on 4D Printing. In: Developing Digital Inclusion Through Globalization and Digitalization. IGI Scientific Publishing, pp. 37-54.

Sul, Ramesh Dnyandeo and Kundlik, Nitin and Sharma, Aman and Muthuraman, V. and Kumar, Sendil and Nagarajan, Nagabhooshanam and Naidu, BEVL and Maranan, Ramya and Thirugnanasambandham, T. (2025) Enrichment of Surface Morphology and Mechanical Behaviour of Magnesium Alloy Composite Made With Hybrid Reinforcements Via Vacuum-Aided Stir Cast Process. International Journal of Metalcasting. ISSN 1939-5981

Karthikeyan, K. and GURUSAMY, P. and Muthuraman, V. and Vijayan, S. (2026) Development of biocomposites using alkali-silane modified cellulosic fiber from papaya leaf stem and chitin biopolymer-reinforced vinyl ester. Polymer Bulletin, 83 (2). ISSN 0170-0839

Subash, P. and Gurusamy, P. and Muthuraman, V. and Vijayan, S. (2026) Characterization study on mechanical, thermal conductivity and water absorption properties of silane-modified Plumbago zeylanica stem fiber and wheat straw extracted biosilica particle reinforced polyester composite. Polymer Bulletin, 83 (6). ISSN 0170-0839

Sul, Ramesh Dnyandeo and Kundlik, Nitin and Sharma, Aman and Muthuraman, V. and Kumar, Sendil and Nagarajan, Nagabhooshanam and Naidu, BEVL and Ramkumar, M. C. and Thirugnanasambandham, T. (2026) Featuring of polyethylenimine modifier and characteristics investigations of hybrid perovskite solar cell with tin oxide electron transport layer. Pure and Applied Chemistry. ISSN 0033-4545

GURUSAMY, P. and KUMAR, J. LOKESH and GAYATHRI, N. and Muthuraman, V. (2025) PRODUCTION AND CHARACTERIZATION OF AA 7075 METAL MATRIX COMPOSITES REINFORCED WITH RED MATTA RICE HUSK BIOSILICA. Surface Review and Letters. ISSN 0218-625X

Thirupathy, Maridurai and Muthuraman, V (2024) Effects of Tribology and Mechanical Properties on Silicon Carbide and Glass Fiber-Reinforced Hybrid Nanocomposites. The International Conference on Processing and Performance of Materials (ICPPM 2023). p. 46.

Priyankar, D. and Ali, Zeeshan and Nagaral, Madeva and Rathnakumar, P. and Muthuraman, V and Umar, M.D. (2022) Microstructure and evolution of mechanical properties of Cu-Sn alloy with graphite and nano zirconium oxide particulates. Microstructure and evolution of mechanical properties of Cu-Sn alloy with graphite and nano zirconium oxide particulates.

Ali, Zeeshan and Muthuraman, V and Rathnakumar, P and Gurusamy, P and Nagaral, Madeva (2021) Investigation on the tribological properties of copper alloy reinforced with Gr/Zro2 particulates by stir casting route. Materials Today: Proceedings, 33. pp. 3449-3453. ISSN 22147853

Karunakaran, K. and Chandrasekaran, M. (2017) Investigation of Machine-ability of Inconel 800 in EDM with Coated Electrode. IOP Conference Series: Materials Science and Engineering, 183. 012014. ISSN 1757-8981

Sharmilaa, G and Ganesan, S and Rubi, Jaya and Muthuraman, V. (2025) Advancing Technology with Multidisciplinary Innovation for Sustainable Growth. SCIENTIFIC RESEARCH REPORTS. ISBN 978-81-987134-9-0

Suganya, R.V and Deva, P and Muthumaran, V and Baby, R (2026) Nanophysics: Principles and Emerging Technologies. In: UNSPECIFIED1 Smart Materials, Chemical Systems, and Digital Technologies (2026), pp. 45-54.

Arunkumar, S. and Sriraman, N and Muraliraja, R. and Vinod Kumar, T. and Muthuraman, V. (2022) Performance evolution in machining parameter of Al-Ai(LM6) alloy using neural network. In: Second International Conference on Advancements in Materials Science and Technology (iCAM 2022), November 02 – 04, 2022, Satyabhama Institute of Science and Technology, Chennai – 600119, India..

Vinod Kumar, T. and Ajith Arul Daniel, S and Karunakaran, K. and Arunkumar, S. and Muthuraman, V. (2023) NANO COATING: ADVANCED PROTECTIVE AND FUNCTIONAL SURFACE TECHNOLOGY. In: 2nd International Conference on Multidisciplinary Science and Technology towards Sustainability, March 23 2025, Virtual mode.

Sathishkumar, G. and Sridhar, R. and Muthuraman, V. and Vijayaraj, S. and SATHISH KUMAR, C (2025) INTELLIGENT GAS LEAK DETECTION WITH AUTOMATED SAFETY ALERTS. In: International Conference on Scientific Research and Revolution, 17.08.2025.

Venugopal, S and Chandresekaran, M and Muthuraman, V. and Sathish, S (2017) Computational Fluid Dynamics Analysis of Nozzle in Abrasive Water Jet Machining. IOP Conference Series: Materials Science and Engineering, 183. 012021. ISSN 1757-8981

Arunkumar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Muthuraman, V (2018) Properties and behavior of squeeze pressure on aluminum molybdenum DI-supplied composite. International Journal of Engineering & Technology, 7 (2.33). pp. 496-502. ISSN 1793-8236

Muthuraman, V and Sridhar, R. and Palpandian, P and Arunkumar, S. (2018) Influence of Cryogenic LN2 coolant on Chip morphology in Machining 7075 Aluminium alloy. International Journal of Management, Technology And Engineering, 8 (12). pp. 4611-4615. ISSN 2249-7455

Muthuraman, V. and Karunakaran, K and Arunkumar, S. (2018) Performance comparison of various Dry,Paraffin and conventional coolants in turning 6082 Aluminium alloy. International Journal of Management, Technology And Engineering, 8 (12). pp. 4607-4610. ISSN 2249-7455

Arunkumar, S. and Chandrasekaran, M. and Muthuraman, V and Vinod Kumar, T. (2018) DESIGN OF BACKGEAR MECHANISM IN LATHE. International Journal of Management, Technology And Engineering, 8 (12). pp. 4502-4514. ISSN 2249-7455

Muthuraman, V and Pradeepkumar, M. (2024) Performance Evaluation of Liquid Nitrogen as coolant in Turning of Al/SiC Metal Matrix Composites(AMMC). Advanced Materials Research, 893. pp. 341-345.

Muthuraman, V and Chandrasekaran, M. and Dhansekaran, C. and Arunkumar, S. (2014) Investigation on influence of cutting forces in evaluating performance in machining of 7075 aluminium alloy with cryogenic liquid nitrogen as a coolant. International Journal of Mechanical and Production Engineering Researchh and Development, 8 (3). pp. 1322-1328. ISSN 2249-8001

Manimaran, A and Muthuraman, V and Jayakumar, V (2018) A NOVEL TOLERANCE EVALUATION FRAMEWORK FOR GREEN SUPPLY CHAIN MANAGEMENT IMPLEMENTATION. International Journal of Mechanical Engineering and Technology, 9 (1). ISSN 0976-6359

Muthuraman, V and Gurusamy, P and Arunkumar, S and Parthiban, A (2020) Investigation on Influence of Cutting Forces In Performance Evaluation of Machining Of Al/Sic Composite (LM-13) Using Cryogenic Liquid Nitrogen as A Coolant. TEST Engineering and Management. ISSN 0193 - 4120

GURUSAMY, P. and Muthuraman, V. and Lokeshkumar, J. and Hari Krishna Raj, S. (2022) Fabrication and Mechanical Behaviour of Al-6061/Al2O3 Metal Matrix Composite Fabricated Through Powder Metallurgy Technique. International Journal of Vehicle Structures and Systems, 14 (1). ISSN 0975-3060

Gurusamy, P. and Prabu, S. Balasivanandha and Nagasankar, P. and Muthuraman, V. and Mohanavel, V. (2021) Solidification behaviour of squeeze cast aluminium composites. Solidification behaviour of squeeze cast aluminium composites. 020028.

Arunkumar, S. and Dhanasekaran, C and Muthuraman, V. and Vinod Kumar, T. (2021) Modelling and stress analysis of shaft used in hydraulic streeing pump. Materials Today: Proceedings, 37. pp. 2474-2477. ISSN 22147853

Ruban, M and Vijayaraj, S and Soundarya, M K and Sridhar, R and Baskar, S and Karunakaran, K and Gopalakrishnan, T and Ajith Arul Daniel, S and Gnanavel, C and Muthuraman, V (2026) Industry 4.0 and the Rise of Artificial Intelligence in Production: Artificial Intelligence in Production. Amazon Kindle. ISBN 978-9355255044

Manimaran, A. and Muthuraman, V. (2017) Interaction between tolerance levels of people and adoption of green supply chain management practices: an empirical case study in the domestic appliances industry. International Journal of Environment, Workplace and Employment, 4 (3). p. 205. ISSN 1741-8437

Arunkumar, S. and Sriraman, N. and Muraliraja, R. and Vinod Kumar, T. and Muthuraman, V. (2023) Performance evolution in machining parameter of Al-Si (LM6) alloy using neural network. Materials Today: Proceedings. ISSN 22147853

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) Numerical exploration of heat transfer in a heat exchanger tube with cone shape inserts and Al2O3 and CuO nanofluids. Materials Today: Proceedings, 21. pp. 940-947. ISSN 22147853

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) CFD Analysis of Twisted Tape Heat Exchanger with Twist Ratio of 3 in Metallic and Ceramic Nano Fluids. International Journal of Vehicle Structures and Systems, 12 (3). ISSN 0975-3060

Parthiban, A. and Chandrasekaran, M. and Muthuraman, V. and Sathish, S. (2018) Optimization of CO2 Laser Cutting of Stainless Steel Sheet for Curved Profile. Materials Today: Proceedings, 5 (6). pp. 14531-14538. ISSN 22147853

Pavan Kishore, M. L. and Madhavi, B. and Pati, Pravat Ranjan and Pugazhenthi, R. and Giri, Jayant and Sathish, T. and Parthiban, A. (2024) Free vibration analysis of composite aircraft wing. Interactions, 245 (1). ISSN 3005-0731

Arunkumar, S. and Muthuraman, V. and Baskaralal, V P M (2017) Optimization of the Machining parameter of LM6 Alminium alloy in CNC Turning using Taguchi method. IOP Conference Series: Materials Science and Engineering, 183. 012024. ISSN 1757-8981

Muthuraman, V. and Arunkumar, S. (2017) Experimental evaluation of machining parameters in machining of 7075 aluminium alloy with cryogenic liquid nitrogen coolant. IOP Conference Series: Materials Science and Engineering, 183. 012012. ISSN 1757-8981

Arunkumar, S. and Baskaralal, V P M and Muthuraman, V. (2017) Comparative Investigation on Modal analysis of LM25 Aluminium alloy with other Aluminim alloys using Finite element analysis software. IOP Conference Series: Materials Science and Engineering, 183. 012011. ISSN 1757-8981

Gurusamy, P. and Raj, S. Hari Krishna and Muthuraman, V. and Kingsly, J. Joshua and Subash, V. and Ram, K. Shri Gokum and Srinivasan, D. (2024) Production and mechanical properties of aluminium – Copper alloy reinforced with Al2O3 metal matrix composites. In: INTERNATIONAL CONFERENCE ON MATHEMATICAL ANALYSIS AND ITS APPLICATIONS 2022 (IConMAA 2022): Analysis, Uncertainty, and Optimization, 14–16 October 2023, Medan, Indoensia.

GURUSAMY, P. and Muthuraman, V. and Hari Krishna Raj, S. and Lokesh Kumar, J. (2022) Performance and Experimental Analysis of Al-Al2O3 Metal Matrix Composites. International Journal of Vehicle Structures and Systems, 14 (2). ISSN 0975-3060

Muthuraman, V. and Arunkumar, S. and Baskarlal, V. P. M. (2017) MODELLING AND SIMULATION ANALYSIS OF METAL CASTINGS. MODELLING AND SIMULATION ANALYSIS OF METAL CASTINGS.

Lokesh Kumar, J. and GURUSAMY, P. and Gayathri, N. and Muthuraman, V. (2024) Influence of graphene nanoplates and titanium diboride particulate on wear and interfacial bonding properties of sintered aluminium alloy composites. Diamond and Related Materials, 144. p. 111035. ISSN 09259635

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) Heat Transfer Amplification through Special Tube Inserts and Metallic Nanofluids in Heat Exchanger. International Journal of Vehicle Structures and Systems, 11 (4). ISSN 0975-3060

Saravanan, R. and Karuppasamy, M. and Chandrasekaran, M. and Muthuraman, V. (2021) Heat Transfer Effect of CNT and Ethylene Glycol Based Nano-Fluid in Twisted Tape Heat Exchanger with Balls. International Journal of Vehicle Structures and Systems, 12 (4). ISSN 0975-3060

Ali, Zeeshan and Nagaral, Madeva and Muthuraman, V and Auradi, V. and Bharath, V. and Kumar, Sandeep and Kumar, Rahul and Majdi, Ali and Ali, Abduljabar H. and Algburi, Sameer (2024) Synthesis of a356 alloy-variable particle sized boron carbide composites: investigations on mechanical behaviour and tensile fractography. Applied Engineering Letters : Journal of Engineering and Applied Sciences, 9 (3). pp. 162-172. ISSN 24664677

Padmanabhan, S. and Parthasarathy, Murugesan and Vinod Kumar, T. and Muthuraman, V. and Muraliraja, R. and Ganesan, Subbiah (2023) Environmental impact of waste plastic pyrolysis oil on insulated piston diesel engine with methoxyethyl acetate additive. Petroleum Science and Technology, 41 (10). pp. 1113-1130. ISSN 1091-6466

Vinod Kumar, T. and Muraliraja, R. and Ajith Arul Daniel, S. and Gnanavel, C. and Muthuraman, V. (2025) Applications of Nano-Coating in Mechanical Systems: Improving Wear, Corrosion, and Performance. In: Emerging Trends in Multidisciplinary Engineering: A Comprehensive Overview,. SCIENTIFIC RESEARCH REPORTS, pp. 101-125. ISBN 978-81-9840066-6

Ali, Zeeshan and Muthuraman, V. and Rathnakumar, P. and Gurusamy, P. and Nagaral, Madeva (2023) Influence of B4C particle size on the mechanical behavior of A356 aluminium composites. Research on Engineering Structures and Materials. ISSN 21489807