Browse by Employee ID

Number of items: 48.

Kumar, Indradeep and Dhanasekaran, C (2019) Computational Modelling Of Nano-Composites (Single Walled Carbon Nanotubes) For Engine. Materials Today: Proceedings, 18. pp. 4210-4216. ISSN 22147853

Prakash, P. and Dhanasekaran, C (2022) Influencing parameter optimisation of CRDI engine fuelled with lemongrass biodiesel blends. International Journal of Ambient Energy, 44 (1). pp. 719-738. ISSN 0143-0750

Arul Oli, A. and Dhanasekaran, C (2023) A study related to product service systems (PSS), SERVQUAL and knowledge management system (KMS) – A review. Materials Today: Proceedings, 80. pp. 3579-3584. ISSN 22147853

Sivaganesan, S. and Chandrasekaran, M. and Dhanasekaran, C and Parthiban, A. (2018) The Impact of Various Compression Ratio and Influence of Bio Additive With Jatropha Methyl Ester Biodiesel in DI Diesel Engine. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 989-996. ISSN 2249-6890

Dhanasekaran, C and Mohankumar, G. (2014) Hydrogen Gas in Diesel Engine Using DEE as Ignition Source. Applied Mechanics and Materials, 591. pp. 150-154. ISSN 1662-7482

Dhanasekaran, C. and Mohankumar, Gabriael (2015) Hydrogen Gas as a Fuel in Direct Injection Diesel Engine. Journal of The Institution of Engineers (India): Series C, 97 (2). pp. 157-162. ISSN 2250-0545

Dhanasekaran, C and Mohankumar, G. (2016) Dual fuel mode DI diesel engine combustion with hydrogen gas and DEE as ignition source. International Journal of Hydrogen Energy, 41 (1). pp. 713-721. ISSN 03603199

Gopal, P and . Bupesh Raja, V K and Chandrasekaran, M. and Dhanasekaran, C (2017) WEAR STUDY ON HYBRID NATURAL FIBER EPOXY COMPOSITE MATERIALS USED AS AUTOMOTIVE BODY SHELL. WEAR STUDY ON HYBRID NATURAL FIBER EPOXY COMPOSITE MATERIALS USED AS AUTOMOTIVE BODY SHELL, 12 (8). pp. 2485-2490. ISSN 1819-6608

Gnanavel, C. and Saravanan, R and Chandrasekaran, M. and Pugazhenthi, R. (2017) Restructured review on Electrical Discharge Machining - A state of the art. IOP Conference Series: Materials Science and Engineering, 183. 012015. ISSN 1757-8981

Gopal, P and Bupesh Raja, V K and Chandrasekaran, M. and Dhanasekaran, C (2017) Woven Hybrid Composites - Tensile and Flexural Properties of Jute Mat Fibres with Epoxy Composites. IOP Conference Series: Materials Science and Engineering, 183. 012001. ISSN 1757-8981

Mohan Kumar,, G. and Dhanasekaran, C (2017) Port Injection of Hydrogen Gas in Direct Injection Diesel Engine using DEE as Ignition Enhancer. Port Injection of Hydrogen Gas in Direct Injection Diesel Engine using DEE as Ignition Enhancer, II.

Kumar, Indradeep and Dhanasekaran, C (2019) Nanomaterial-Based Energy Storage And Supply System In Aircraft. Materials Today: Proceedings, 18. pp. 4341-4350. ISSN 22147853

Senthil Babu, S. and Dhanasekaran, C and Parthiban, A. and Vasudevan, N. and Mekonnen, Addisalem (2023) Analysis of MRR, Thrust Force, and Torque in Drilling Al/BN/Al2O3 Composites using Hybrid Grey–Taguchi Technique. Journal of Nanomaterials, 2023. pp. 1-8. ISSN 1687-4110

Kumar, Indradeep and Dhanasekaran, C (2019) A Review on Nano-Casing Of Jet Engine And Diesel Engine Using Single-Walled Carbon Nanotubes. Materials Today: Proceedings, 18. pp. 5464-5471. ISSN 22147853

Prakash, P. and Dhanasekaran, C (2019) Experimental Investigation on Jatropha-Methanol Blends in Direct Injection Diesel Engines. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Sivaganesan, S. and Ferdaus, F. and Dhanasekaran, C and Sathishkumar, G. and Sivabalan, S. (2019) CFD Analysis of Aircraft Curved C-D Nozzle: Technical Note. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Pugazhenthi, R. and Sivaganesan, S. and Dhansekaran, C. and Parthiban, A. (2019) Morphological and Mechanical Characteristics of Hybrid Aluminium Matrix Composites. International Journal of Vehicle Structures and Systems, 11 (2). ISSN 0975-3060

Prakash, P. and Parthiban, A. and Dhanasekaran, C. and Sivaganesan, S. (2018) CFD ANALYSIS OF CONCENTRIC CIRCULAR TUBE WITH INSERTS. International Journal of Management, Technology And Engineering, 8. pp. 4674-4682. ISSN 2249-7455

Prakash, P. and Sivaganesan, S. and Dhanasekaran, C. and Parthiban, A. (2018) VEHICLE OVERTAKING ASSISTANCE SYSTEM. International Journal of Management, Technology And Engineering, 8. pp. 4683-4687. ISSN 2249-7455

Ruban, M. and Sivaganesan, S. and Dhanasekaran, C and Karikalan, L (2018) SOLAR ENERGY STORAGE BY USING PCM MATERIALS WITH FOUCUSING LENS. International Journal of Management, Technology And Engineering, 8 (12).

Sivaganesan, S. and Ruban, M. and Dhanasekaran, C and Joseph Irudaya Raja, S. (2018) REVIEW OF RESEARCH AND DEVELOPMENTS OF LATENT HEAT STORAGE SYSTEMS USED IN THE SOLAR DESALINATION SYSTEM. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD). ISSN 2249-8001

Muthuraman, V and Chandrasekaran, M. and Dhansekaran, C. and Arunkumar, S. (2014) Investigation on influence of cutting forces in evaluating performance in machining of 7075 aluminium alloy with cryogenic liquid nitrogen as a coolant. International Journal of Mechanical and Production Engineering Researchh and Development, 8 (3). pp. 1322-1328. ISSN 2249-8001

Prakash, P. and Dhanasekaran, C. and Sivaram, A.R and Venkateshwaran, K (2024) MPU-based gesture-controlled dual six-axis robotic arms with a rover. In: Recent Developments in Multidisciplinary Science and Technological Fields. SRR. ISBN 978-81-970420-8-9

Prakash, P. and Dhanasekaran, C. (2026) Multi-objective optimization of CRDI engine parameters fueled with blends of diesel and sterculia foetida biodiesel: A comparative study of RSM composite desirability and meta-heuristic algorithm. Results in Engineering, 29. p. 109719. ISSN 25901230

Parthiban, A. and Dhanasekaran, C and Sivaganesan, S. and Sathish, S. (2021) Modeling on surface cut quality of CO2 laser cutting for Austenitic Stainless steel sheet. Materials Today: Proceedings, 21. pp. 823-827. ISSN 22147853

Ravi Kulkarni, H. and Dhanasekaran, C and Rathnakumar, P. and Geo Varuvel, Edwin and Sivaganesan, S. and Anantachar, M. (2022) Investigation on performance of bio synthesized copper nano fluid in helical coil and shell type heat exchanger. Materials Today: Proceedings, 52. pp. 862-866. ISSN 22147853

Kumar, Indradeep and Dhanasekaran, C (2020) Behaviour Of Cottonseed Oil Blended With Single-Walled Carbon Nanotubes In, Direct Injection Single Cylinder Diesel Engine. Materials Today: Proceedings, 24. pp. 2157-2162. ISSN 22147853

Kumar, Indradeep and Dhanasekaran, C (2021) Synthesizing of helical-single walled carbon nanotubes by chemical vapour decomposition for engine. Materials Today: Proceedings, 28. pp. 2174-2179. ISSN 22147853

Thendral Selvam, P. and Pugazhenthi, R. and Dhanasekaran, C and Chandrasekaran, M. and Sivaganesan, S. (2021) Experimental Investigation on the Frictional Wear Behaviour of TiAlN Coated Brake Pads. Materials Today: Proceedings, 37. pp. 2419-2426. ISSN 22147853

Kumar, Indradeep and Dhanasekaran, C (2021) Iron-based nanomaterial sheets for electromechanical applications. Materials Today: Proceedings, 45. pp. 3881-3885. ISSN 22147853

Prakash, P. and Dhanasekaran, C and Surya, K. and Varunny Pius, K. and Vishal, A.S. and Vignesh Kumar, S. (2020) Wireless motion controlled dual six axis robotic arms with rover. Materials Today: Proceedings, 21. pp. 465-469. ISSN 22147853

Muraliraja, R. and Pradeepkumar, K. and Mohanraj, P. and Vinod Kumar, T. and Dhanasekaran, C and Chandrasekaran, M. and Ragavanantham, S. and Shaisundaram, V S (2022) The Effects of Electroless Ni-P Coated SiC on the Properties of Magnesium Composite. Materials Performance and Characterization, 11 (1). p. 20210089. ISSN 23791365

Babu, S Senthil and Dhanasekaran, C and Anbuchezhiyan, G. and Palani, Kumaran (2022) Parametric analysis on drilling of aluminium alloy hybrid composites reinforced with SIC/WC. Engineering Research Express, 4 (2). 025036. ISSN 2631-8695

Godwin, R.Charles and Dhanasekaran, C (2021) Optimization of crown and pinion using metal matrix composite. Journal of Materials Research and Technology, 15. pp. 6204-6215. ISSN 22387854

Ajith, Arul Daniel S. and Dhanasekeran, C. and Sivaganesan, S. and Sridhar, R. (2021) Investigation on the Mechanical Properties of Silicon Carbide Particulates in Al/SiC/MoS<sub>2 </sub>. Materials Science Forum, 979. pp. 89-94. ISSN 1662-9752

Prakash, P. and Dhanasekaran, C and Surya, K. and Varunny Pius, K. and Vishal, A.S. and Vignesh Kumar, S. (2020) Gesture controlled dual six axis robotic arms with rover using MPU. Materials Today: Proceedings, 21. pp. 547-556. ISSN 22147853

Kulkarni, H. Ravi and Dhanasekaran, C and Rathnakumar, P. and Mohamed Iqbal, S. and Sivaganesan, S. (2022) Biosynthesized zinc nano fluid for helically coiled heat exchanger at constant heat flux. Materials Today: Proceedings, 58. pp. 104-113. ISSN 22147853

GODWIN, R. CHARLES and Dhanasekaran, C (2023) MICROSTRUCTURAL AND CORROSION ANALYSIS OF CROWN PINION WITH VARIOUS COMPOSITIONS OF HIGH CARBON STEEL AND SILICON CARBIDE MATERIALS. Surface Review and Letters, 30 (11). ISSN 0218-625X

Prakash, P. and Dhanasekaran, C. (2022) Application of ANN, RSM on engine response prediction using lemongrass biomaterial blends. Materials Today: Proceedings, 69. pp. 684-688. ISSN 22147853

Babu, S. Senthil and Dhanasekaran, C (2022) Comparative analysis of thrust force, roughness and roundness error in drilling of aluminium composites using RSM, ANN and fuzzy logic. Materials Today: Proceedings, 69. pp. 908-917. ISSN 22147853

Ravi Kulkarni, H. and Dhanasekaran, C and Rathnakumar, P. and Sivaganesan, S. (2021) Experimental study on thermal analysis of helical coil heat exchanger using Green synthesis silver nanofluid. Materials Today: Proceedings, 42 (2). pp. 1037-1042. ISSN 22147853

Udaya Kumar, M. and Sivaganesan, S. and Dhanasekaran, C and Parthiban, A. (2021) Analysis of performance, combustion and emission parameters in di diesel engine by using mahua methyl ester along with nano metal additives titanium dioxide. Materials Today: Proceedings, 37. pp. 3404-3410. ISSN 22147853

Arunkumar, S. and Dhanasekaran, C and Muthuraman, V. and Vinod Kumar, T. (2021) Modelling and stress analysis of shaft used in hydraulic streeing pump. Materials Today: Proceedings, 37. pp. 2474-2477. ISSN 22147853

Kamalakannan, K. and Sivaganesan, S. and Dhanasekaran, C. and Pugazhenthi, R. (2022) A Study on the Mechanical Properties of Alkali Treated Natural Reinforced Fiber Composites. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 673-682.

Charles Godwin, R. and Dhanasekaran, C (2022) Experimental investigation of high carbon steel MMC for crown pinion gear. Materials Today: Proceedings, 69. pp. 901-907. ISSN 22147853

Maheshwaran, R. and Dhanasekaran, C. and Sivaganesan, S. and Pugazhenthi, R. (2022) Investigation of Mechanical Behavior of Biodegradable Natural Composite PLA Reinforced with Snake Grass Fiber and Sisal Fiber. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 165-173.

Senthil babu, S. and Dhanasekaran, C (2022) Drilling parameter analysis of hybrid composites (Al/B4C/graphite) using grey relational and Taguchi techniques. Materials Today: Proceedings, 68. pp. 1280-1287. ISSN 22147853

This list was generated on Mon May 11 15:41:59 2026 IST.