Items where Division is "Mechanical Engineering" and Year is 2024

A

Adakane, Rakesh and Washimkar, Prashant V. and Chaudhari, Sharad S. and Giri, Jayant and Sathish, T. and Parthiban, A. and Mahatme, Chetan (2024) Prediction and analysis of material removal rate and Tool wear for electric discharge machining of H16 material using ANN and ANOVA. Interactions, 245 (1). ISSN 3005-0731

Ali, Zeeshan and Nagaral, Madeva and Muthuraman, Vadivel and Auradi, V. and Bharath, V. and Kumar, Sandeep and Kumar, Rahul and Majdi, Ali and Ali, Abduljabar H. and Algburi, Sameer (2024) Synthesis of a356 alloy-variable particle sized boron carbide composites: investigations on mechanical behaviour and tensile fractography. Applied Engineering Letters : Journal of Engineering and Applied Sciences, 9 (3). pp. 162-172. ISSN 24664677

Anbarasu, Naveen Arasu and Keshav, Lakshmi and Raja, Kalyana Chakravarthy Polichetty and Sivakumar, Vivek (2024) Unraveling the flexural behavior of concrete and compare with innovative fea investigations. Matéria (Rio de Janeiro), 29 (4). ISSN 1517-7076

Arunachalam, S. Jothi and Saravanan, R. and Sathish, T. and Parthiban, A. (2024) Comprehensive insights on mechanical properties of natural-synthetic fibres with nano-graphene composite. Interactions, 245 (1). ISSN 3005-0731

Arunachalam, S. Jothi and Saravanan, R. and Sathish, T. and Parthiban, A. (2024) Effect of nano-particle weight percent on the flexural strength of Jute/kenaf/glass fiber composite using RSM. Interactions, 245 (1). ISSN 3005-0731

B

Baskar, S. and Al Khadouri, Salim Saleh Said and Arokiasamy, Dr. Anantha Raj A. and Raman, Dr. Arasu (2024) Adaptive Mobility and Reliability-based Routing Protocol for Smart Healthcare Management Systems in Vehicular Ad‐hoc Networks. Journal of Wireless Mobile Networks, Ubiquitous Computing, and Dependable Applications, 15 (3). pp. 150-159. ISSN 20935374

Baskar, S. and Majid, Mohd. and Raman, Arasu and Babu, L. Ganesh and Selvaraj, Mahalingam and Sambandam, Padmanabhan and Punitha, N. and Vijayaraj, S. and Anish, M. and Deepak, J.R. (2024) Development of synthesized fuels based on diesel by incorporating zinc oxide nanoparticles, surfactant and ethyl acetate. Results in Engineering, 24. p. 103633. ISSN 25901230

C

Chandrasekaran, R. and T. R., Thamizhvani and R., Kishore Kanna (2024) Emotional Behaviour Study Using AI Tools:. In: Clinical Practice and Unmet Challenges in AI-Enhanced Healthcare Systems. IGI Global, pp. 171-184.

Chaudhari, Sharad S. and Pundkar, A. H. and Giri, Jayant and Sathish, T. and Daryapurkar, A. S. and Chadge, Rajkumar and Parthiban, A. (2024) Optimizing air conditioning efficiency: Utilizing nano-oxides ZnO, CuO, and TiO2 with traditional and alternative refrigerants in medium temperature range cooling systems. Interactions, 245 (1). ISSN 3005-0731

G

GOWTHAM, R. and CHANDRASEKARAN, R. and B, HARENDHARAN. and INAKOLLU, SAI AMRUTHA (2024) Internet of Things (IOT) based Smart Nebulizer System. In: 2024 5th International Conference on Electronics and Sustainable Communication Systems (ICESC), Coimbatore, India.

Giri, Jayant and Sathish, T. and Sheikh, Taukeer and Sunheriya, Neeraj and Giri, Pallavi and Chadge, Rajkumar and Mahatme, Chetan and Parthiban, A. (2024) Automatic liver segmentation using U-Net deep learning architecture for additive manufacturing. Interactions, 245 (1). ISSN 3005-0731

Giri, Jayant and Sunheriya, Neeraj and Sathish, T. and Kadu, Yash and Chadge, Rajkumar and Giri, Pallavi and Parthiban, A. and Mahatme, Chetan (2024) Optimization of process parameters to improve mechanical properties of fused deposition method using taguchi method. Interactions, 245 (1). ISSN 3005-0731

Girisankar, S. and Senthil Murugan, S. and Shankar, E. (2024) A Review of Insights and Research Progress on Hard Turning. Annals of Dunarea de Jos University of Galati Fascicle XII Welding Equipment and Technology, 35. pp. 119-132. ISSN 1221-4639

Gopalakrishnan, T. and Venkatesan, Raja and Chandrasekaran, M. and Deepa, Simon and Kim, Seong-Cheol (2024) Advances in implant for surface modification to enhance the interfacial bonding of shape memory alloy wires in composite resins. Progress in Organic Coatings, 188. p. 108242. ISSN 03009440

Gurusamy, P. and Raj, S. Hari Krishna and Muthuraman, V. and Kingsly, J. Joshua and Subash, V. and Ram, K. Shri Gokum and Srinivasan, D. (2024) Production and mechanical properties of aluminium – Copper alloy reinforced with Al2O3 metal matrix composites. In: INTERNATIONAL CONFERENCE ON MATHEMATICAL ANALYSIS AND ITS APPLICATIONS 2022 (IConMAA 2022): Analysis, Uncertainty, and Optimization, 14–16 October 2023, Medan, Indoensia.

H

Hariharan, C. and Parthiban, A. and Ajithram, A. and Suresh Kumar, S. (2024) Effect of Fibre Length and Fibre Weight Percentage on the Hardness and Absorption Properties of Sisal, Ramie Fibre Reinforced Hybrid Polymer Composites. In: Springer Proceedings in Materials ((SPM,volume 60)). Springer Nature Link, pp. 269-279.

Hariharan, Chandran and parthiban, Alagesan and Thanikodi, Sathish (2024) Investigating indispensable characteristics of Boehmeria nivea and Agave sisalana fiber–reinforced epoxy hybrid composites for particle board applications. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Hemadri, Kadapa and Ajith Arul Daniel, S. and Kukanur, Vijayendra and Nagaral, Madeva (2024) Determination of wear rate and coefficient of friction of Al6262 reinforced with different weight percentage of WC/MoS2 under dry sliding condition. Research on Engineering Structures and Materials. ISSN 21489807

J

Jayaraman, Dineshkumar and Alagesan, Parthiban and Thangavel, Sankar and Dhairiyasamy, Ratchagaraja (2024) Investigating the effect of cashew nutshell liquid and aluminum powder on the mechanical and thermal properties of epoxy resins. Matéria (Rio de Janeiro), 29 (4). ISSN 1517-7076

Jesumanen, J and Chandrasekaran, M. and Aurtherson, P. Babu (2024) Influence of rice husk ash Si3N4 ceramic on mechanical, wear and low cycle fatigue behavior of hybrid pineapple/basalt fiber reinforced polyester composite. Biomass Conversion and Biorefinery. ISSN 2190-6815

K

Kasinathan, Narendranathan Srinivasan and Suyamburajan, Vijayananth and Veerasundaram, Jayaseelan and Kumarsamy, Sudhakar (2024) CALOPHYLLUM INOPHYLLUM (PUNNAI SEED OIL) DERIVED BIOFUEL BLENDS: THERMAL PERFORMANCE AND ENGINE EMISSIONS. International Journal of Energy for a Clean Environment, 25 (1). pp. 37-50. ISSN 2150-3621

karthik, Ganapathi and Parthiban, A. and Sathish, T. and Giri, Jayant (2024) Experimental analysis and development of fuzzy model for the prediction of COP and mass flow rate in air-conditioning system. Interactions, 245 (1). ISSN 3005-0731

L

Loganathan, Karikalan and Megaraj, Meikandan and Murugadass, Gokulnath and Elango, Vignesh and Jayapragasam, Dilip Abishek (2024) Retrofitment of existing two wheeler into electric vehicle. In: THE 5TH INTERNATIONAL CONFERENCE ON BUILDINGS, CONSTRUCTION, AND ENVIRONMENTAL ENGINEERING: BCEE5, 21–23 November 2023, Amman, Jordan.

Lokesh Kumar, J. and Gurusamy, P. and Gayathri, N. and Muthuraman, V. (2024) Influence of graphene nanoplates and titanium diboride particulate on wear and interfacial bonding properties of sintered aluminium alloy composites. Diamond and Related Materials, 144. p. 111035. ISSN 09259635

M

Madan, A.B. and Parthiban, A. and Singh, J. and Bhattu, M. (2024) Experimental investigation of mechanical and tribological properties of AA7065- B 4 C nano-composite. E3S Web of Conferences, 509. 01014. ISSN 2267-1242

Madhanagopal, A. and Arunkumar, S. and Jagatheesan, K. and Adinarayanan, A. (2024) Investigation on mechanical and thermal properties of clay brick additions with sugarcane bagasse ash and nanoparticles. Biomass Conversion and Biorefinery, 14 (17). pp. 21475-21483. ISSN 2190-6815

Mallieswaran, K. and Agaramudhalvan, S. and Nithya, R. and Shuruti, R. and Radhika, S. (2024) Design and Implementation of Advanced Safety Features in Two-Wheeled Vehicles for Accident Prevention and Anti-Theft System. In: Automotive Technical Papers, Warrendale, Pennsylvania, United States.

Manickavelan, K. and Sivaganesan, S. and Sivamani, S. and Kulkarni, Mithun V. (2024) Response Surface Optimization of Brake Thermal Efficiency and Specific Fuel Consumption of Spark-Ignition Engine Fueled with Gasoline–Pyrooil and Gasoline–Pyrooil–Ethanol Blends. SAE International Journal of Fuels and Lubricants, 18 (1). ISSN 1946-3952

Maruthapandian, M. and Pugazhenthi, R. (2024) Optimization of the micro plasma arc welding and tipping process of exhaust valve. In: INTERNATIONAL CONFERENCE ON MATHEMATICAL ANALYSIS AND ITS APPLICATIONS 2022 (IConMAA 2022): Analysis, Uncertainty, and Optimization, 14–16 October 2023, Medan, Indoensia.

Mohankumar, K and Pugazhenthi, R and Khan, Naushad Hasin and Srinivas, Gollapalli Veera Satya and Parthiban, A and Karthick, M and Alotaibi, Majed A and Majumder, Himadri (2024) Experimental investigation of the friction stir welding process of AA5059 and AA7079 and prediction using fuzzy approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN 0954-4062

Mohanraj, P. and Sridhar, R. and Gopalakrishnan, T. and Manikandan, R. and Bhowmik, Abhijit and Alam, Tabish (2024) Transient Characteristics and Performance of a Dual Compensation Chamber Loop Heat Pipe under Various Heat Loads. Journal of Engineering, 2024 (1). ISSN 2314-4904

Muthukumaran, R. and Ajith Arul Daniel, S. and Nithya, M. and Parthiban, A. and Sathish, T. and Giri, Jayant and Al-Lohedan, Hamad A. (2024) Characterization on properties of Al7050/TiC/BN hybrid metal matrix composite. AIP Advances, 14 (4). ISSN 2158-3226

P

Padmanabhan, S. and Joel, C. and Mahalingam, S. and Deepak, J. R. and Vinod Kumar, T. and Raj, Deborah (2024) An Overview of the Need for Circular Economy on Electric Vehicle Batteries. Nature Environment and Pollution Technology, 23 (1). pp. 183-191. ISSN 23953454

Padmanabhan, S. and Kumar, T. Vinod and Muthuraman, V. and Kumar, D. Sendil and Reddy, Mulinti Navneeth and Teja, T. Adi Sesha Sai (2024) Investigation and Parametric Optimization of Abrasive Water Jet Machining of AA7075 Through Response Surface Methodology. In: Smart Materials and Manufacturing Technologies for Sustainable Development. Springer, pp. 135-142.

Padmanabhan, S. and Vinod Kumar, T. and Sendil Kumar, D. and Rubini, B. and Arunkumar, S. and Arul Peter, A. and Vijayan, V. (2024) A Comparative Analysis of the Fuel Characteristics of Bioenergy Sources to Meet Sustainability and Environmental Goals: Sustainability and Environmental Goals. Journal of Environmental Nanotechnology, 13 (4). pp. 122-129. ISSN 2279-0748

Pavan Kishore, M. L. and Madhavi, B. and Pati, Pravat Ranjan and Pugazhenthi, R. and Giri, Jayant and Sathish, T. and Parthiban, A. (2024) Free vibration analysis of composite aircraft wing. Interactions, 245 (1). ISSN 3005-0731

Prabakaran, P. and Choudhary, Mukesh and Kumar, Kaushal and Loganathan, Ganesh Babu and Salih, Idris Hadi and Kumari, Khushboo and Karthick, L. (2024) Integrating Mechanical Systems With Biological Inspiration: Implementing Sensory Gating in Artificial Vision. In: Trends and Applications in Mechanical Engineering, Composite Materials and Smart Manufacturing. IGI Global Scientific Publishing, pp. 193-206.

Prabhu, P. and Chokkalingam, V. and Arunkumar, S. and Perumal, Prakash (2024) The investigation on mechanical, thermal conductivity and water absorption characteristics of coir fiber-reinforced vinyl ester biocomposites. Biomass Conversion and Biorefinery. ISSN 2190-6815

Prabhu Deva, Madan and Parthiban, A. and Theerka Tharisanan, R. and Ashok Raj, R. and Singh, J. and Bhattu, M. (2024) Investigate the Mechanical properties of Al7075-MoS 2 Composite via Powder Metallurgy. E3S Web of Conferences, 509. 03006. ISSN 2267-1242

Prakash, N. Ram and Gnanavel, C. (2024) Effect of rice husk ash silicon nitride on mechanical, wear, thermal conductivity, and flammability behavior of aluminized glass-kenaf fiber-reinforced polyester composite. Biomass Conversion and Biorefinery. ISSN 2190-6815

Prakash, N. Ram and Gnanavel, C. (2024) Investigation of Quartz-Rich Granite Dust Particle-Reinforced Aluminized Glass–Kenaf Fiber-Reinforced Polyester Composite: Load Bearing, Water absorption and Flame Properties. Fibers and Polymers, 25 (9). pp. 3525-3537. ISSN 1229-9197

Prakash, P. and Elumalai, P.V. and Chelladurai, Hariharan and Josephine, Golden Renjith Nimal Renjith and Velumayil, Ramesh and Asif, Mohammad and Kit, Chan Choon and Venkatesan, Balambica and Rajagopal, Sabarish and Baskar, S. and Reddy, M. Venkateswar and S, Prabhakar (2024) Parameter fine tuning on CRDI engine operated with blends of grape biodiesel and diesel. Case Studies in Thermal Engineering, 60. p. 104701. ISSN 2214157X

Purohit, Abhilash and Dehury, Janaki and Sitani, Ayush and Pati, Pravat Ranjan and Giri, Jayant and Sathish, T. and Parthiban, A. (2024) A novel study on the stacking sequence and mechanical properties of Jute-Kevlar-Epoxy composites. Interactions, 245 (1). ISSN 3005-0731

R

Radha Krishnan, B. and Sudarsan, D. and Sanjeevi, R. and Parthiban, A. and Eswara Prasath, N. and Arun Prasath, K. (2024) Formability and Strength Enhancement of AA7075 Sheets by Cryorolling and Post-Treatment. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

Rahman, M. Adeelur and Kumar, S.D. and Pugazhenthi, R. (2024) Design Optimization and Experimental Investigation on Friction Stir Welded Aluminium Alloys and its Mechanical Characteristics. International Journal of Vehicle Structures and Systems, 16 (6). ISSN 0975-3060

Raj, J. Immanuel Durai and Durairaj, R. B. and Ananth, S. Vijay and Barmavatu, Praveen (2024) Experimental investigation of the effect of e‐waste fillers on the mechanical properties of Kenaf woven fiber composites. Environmental Quality Management, 34 (1). ISSN 1088-1913

Raj, J. Immanuel Durai and Durairaj, R. B. and Ananth, S. Vijay and Meenakshisundaram, Nagaraj (2024) Effect of e‐waste materials as filler in the flax woven fiber reinforced polymer composite for a sustainable environment. Environmental Quality Management, 33 (4). pp. 541-550. ISSN 1088-1913

Raj, S. Hari Krishna and Boopathy, G. and Vijayananth, S. and Balaji, G. and Ramanan, N. (2024) Feasibility and Insights into the Optimization and Characterization of Friction Welded Aluminum–Steel Dissimilar Joints. In: Advances in Science, Technology & Innovation. Springer, pp. 121-129.

Rajan, Raguram and Loganathan, Karikalan (2024) An investigational study of the performance and emission of vegetable oil as a fuel in the CI engine. In: THE 5TH INTERNATIONAL CONFERENCE ON BUILDINGS, CONSTRUCTION, AND ENVIRONMENTAL ENGINEERING: BCEE5, 21–23 November 2023, Amman, Jordan.

Ramalingam, Venugopal Sayee and Murugan, Venkateshwaran and Prabhu, Jay Gouthaman Rajesh (2024) Analysis of mass reduction of body in white component by using linear regression prediction method. In: THE 5TH INTERNATIONAL CONFERENCE ON BUILDINGS, CONSTRUCTION, AND ENVIRONMENTAL ENGINEERING: BCEE5, 21–23 November 2023, Amman, Jordan.

Ramasubramanian, Shanmugam and Arshad, Mohamed and Megaraj, Meikandan and Leonard, Jones Francis and Murali, Kannan (2024) Design and analysis of tractor rear axle casing. In: THE 5TH INTERNATIONAL CONFERENCE ON BUILDINGS, CONSTRUCTION, AND ENVIRONMENTAL ENGINEERING: BCEE5, 21–23 November 2023, Amman, Jordan.

Ravi, Manikandan and Venkatesan, Raja and Thangavel, Gopalakrishnan and Palanisami, Jagadeeswaran and Deepa, Simon and Kim, Seong-Cheol (2024) Advancing environmental remediation through tailored TiO2 nanomaterials in water and air purification. Inorganic Chemistry Communications, 170. p. 113171. ISSN 13877003

Ravindran, Prabu and Kumar, Kumarappan Mani and Rangasamy, Selvam and Kumar, Kuttynadar Rajammal Vijaya (2024) Plain Kevlar and a CNT-reinforced Kevlar epoxy polymer composite: Comparative study of its mechanical, low velocity and ballistic impact properties. Iranian Polymer Journal, 32 (2). pp. 239-249. ISSN 1026-1265

S

Sambandam, Padmanabhan and James Raj, Deepak and Vinod Kumar, T. and Muthiya, Solomon Jenoris and Subramanian, Mohankumar and Pachamuthu, Senthilkumar and Praveen Kumar, T (2024) Investigation of the environmental implications of using cerium oxide nano-additives in gasoline engines fueled with gasoline-oxyhydrogen. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 46 (1). pp. 75-94. ISSN 1556-7036

Sathish, T. and Parthiban, A. (2024) Electrical instruments based thermal conductivity optimization on sintering of nanocomposites of Al and TiB with and without fly ash. Interactions, 245 (1). ISSN 3005-0731

Sathish, T. and Saravanan, R. and Arunachalam, S. Jothi and Parthiban, A. (2024) Flexural properties of jute/kenaf/glass fibre reinforced nano-composite. Interactions, 245 (1). ISSN 3005-0731

Sathish, T. and Saravanan, R. and Arunachalam, S. Jothi and Parthiban, A. and Giri, Jayant (2024) Comparing Kevlar Fiber influence on PP/sisal/SiO2 nanoparticle fillers/Kevlar hybrid nanocomposites with plain nanocomposite for enhanced mechanical properties. Interactions, 245 (1). ISSN 3005-0731

SathishKumar, G. and Prashanth, K. S. and Khatoon, Umme Thahira and Selvarani, A. Geetha and Sridhar, R. and Sivabalan, S. and Chakravarthy, P. R. Kalyana and Vijayan, V. and Baskar, S. (2024) Investigation of mechanical properties, viscoelastic properties and free vibration analysis of natural fibre reinforced composite materials. Interactions, 245 (1). ISSN 3005-0731

Selvam, R. and Vignesh, M. and Pugazhenthi, R. and Anbuchezhiyan, G. and Satyanarayana Gupta, M. (2024) Effect of process parameter on wire cut EDM using RSM method. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (5). pp. 2957-2968. ISSN 1955-2513

Sivabalan, S. and Sridhar, R. and Ajith Arul Daniel, S. and Sathishkumar, G. (2024) Study of mechanical behaviour & microstructural properties on friction stir welded aluminium alloys 6082 - t6&8011. E3S Web of Conferences, 509. 03012. ISSN 2267-1242

Sivakumar, V. and Visagavel, K. and Kumaraswamy, J. and Balaji, E. and Khalkar, V. and Gnanavel, C. and Chakravarthy, P. R. Kalyana and Baskar, S. and Vijayan, V. (2024) Performance study and analysis of Al2O3 Nanofluid under different flow conditions. Interactions, 245 (1). ISSN 3005-0731

Sivakumar, V. and Visagavel, K. and Kumaraswamy, J. and Balaji, E. and Khalkar, V. and Gnanavel, C. and Kalyana Chakravarthy a, P. R. and Baskar, S. and Vijayan, V. (2024) Correction to: Performance study and analysis of Al2O3 Nanofluid under different flow conditions. Interactions, 245 (1). ISSN 3005-0731

Sripriya, S and Namdev Satyappa, Madane and Gnanam, S and Prakash, K. and Shaisundaram, V S and Baskar, S. (2024) AI’s Role in Engineering Innovations for Social Development. In: Emerging Trends in Multidisciplinary Technology and Science. SRR. ISBN 978-81-980792-1-3

Sundaram, N. Kalyana and Richard, Titus and Chaudhari, M.B. and Varshney, Neeraj and Velusudha, N.T. and Jain, Naveen and Tharmar, S. and Navven, K.P. and Guru Jawahar, J. and Ramya, K. and Pragathi, B. (2024) Optimization of Gearless Wind Power Conversion Systems: Reducing Mechanical Losses and Improving Reliability. E3S Web of Conferences, 591. 02001. ISSN 2267-1242

Sunheriya, Neeraj and Giri, Jayant and Sathish, T. and Chadge, Rajkumar and Mahatme, Chetan and Parthiban, A. and Barmavatu, Praveen (2024) Evaluation of a helical coil heat exchanger in a forced convection environment. Interactions, 245 (1). ISSN 3005-0731

T

Thejasree, P. and Manikandan, N. and Sunheriya, Neeraj and Giri, Jayant and Sathish, T. and Chadge, Rajkumar and Mahatme, Chetan and Parthiban, A. (2024) Application of ANFIS approach for prediction of performance measures in wire electric discharge machining of SAE 1010. Interactions, 245 (1). ISSN 3005-0731

Thirupathy, Maridurai and Vadivel, Muthuraman (2024) Effects of Tribology and Mechanical Properties on Silicon Carbide and Glass Fiber-Reinforced Hybrid Nanocomposites. In: The International Conference on Processing and Performance of Materials (ICPPM 2023).

Thirupathy, Maridurai and Vadivel, Muthuraman (2024) Experimental Investigation on the Mechanical Properties of Jute Fiber and Silica Nano Particles Using Artificial Neural Network. In: The International Conference on Processing and Performance of Materials (ICPPM 2023).

Thirupathy, Maridurai and Vadivel, Muthuraman and Subbiah, Thirugnanam and Pathinettampadian, Gurusamy (2024) Experimental Investigation of the Mechanical and Tribological Properties of Jute Fiber Composites with Nano-Sized Al2O3 Ceramic Particle Reinforcement. In: The International Conference on Processing and Performance of Materials (ICPPM 2023).

Thirupathy, Maridurai and Vadivel, Muthuraman and Subbiah, Thirugnanam and Pathinettampadian, Gurusamy (2024) Experimental Investigation on the Impact of Tungsten Carbide Reinforcement on the Mechanical Properties of Sisal-Fiber-Reinforced Composites. In: The International Conference on Processing and Performance of Materials (ICPPM 2023).

U

Umar, MD and Muraliraja, R and Rathnakumar, P and Tamilarasan, T.R (2024) The influence of ZrO2 on tribological and mechanical characteristics of Al composite. Materials Today: Proceedings, 115. pp. 17-23. ISSN 22147853

V

Venkatesh, R. and Angalaparameswari, C. and Ammaiappan, M. and Das, A. Daniel and Arunkumar, G. and Kamatchi, R. Muthu and Kaliyaperumal, Gopal (2024) Effective Utilization of Bast Fiber in High Density Polyethylene Nanocomposite Enriched by Alumina Nanoparticle: Mechanical Performance Evaluation. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

Venkatesh, R. and Das, A. Daniel and Kamatchi, R. Muthu and Kaliyaperumal, Gopal and Ajin, M. and Shanmugam, Rajasekaran (2024) Synthesis and Functional Behavior of Sisal Fiber-Incorporated Epoxy Hybrid Nanocomposite Enriched by Nano-SiC. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

Venkatesh, R. and Devanathan, C. and Dillikannan, Damodharan and Akila, P. and Kamatchi, R. Muthu and Das, A. Daniel and Karthikeyan, N. and Kaliyaperumal, Gopal (2024) Significance of Hemp Fiber on Mechanical and Thermal Performance of Polypropylene Nanocomposite Developed by Compression Mould Technique. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

Venkatesh, R. and Dillikannan, Damodharan and Ilavarasan, N. and Kamatchi, R. Muthu and Das, A. Daniel and Ammaiappan, M. and Arunkumar, G. and Kaliyaperumal, Gopal (2024) An Approach of Nano-SiC-Filled Epoxy Nanocomposite Tensile and Flexural Strength Enriched by the Addition of Sisal Fiber. Journal of The Institution of Engineers (India): Series D. ISSN 2250-2122

Y

Yaduwanshi, Deepak Kumar and Rao, Chennu Rama Mohan and Naidu, S. C. V. Ramana Murty and Sakharwade, Sanjay G. and Sharma, Sumit and Khalkar, V. and Baskar, S. and Kaliyaperumal, Gopal (2024) Thermal evaluation of aluminum welding: a comparative study of friction stir welding (FSW), plasma-fsw, and tungsten inert gas (TIG)-FSW techniques. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (8). pp. 5501-5513. ISSN 1955-2513