Items where Division is "Mechanical Engineering" and Year is 2018

Ajith Arul Daniel, S. and Vijayananth, S. and Pugazhenthi, R. and Muthuraman, R.K. (2018) IMPACT ANALYSIS OF INSAS RIFLE BULLET AGAINST THE VEHICLE ALUMINIUM COMPOSITE ARMOUR PLATE USING LS-DYNA. International Journal of Mechanical Engineering and Technology (IJMET), 9 (11).

Arul Peter, A and Murugesan, K and Umesh Kumar, Sharma (2018) Pore Pressure Prediction of Concrete Exposed to Fire. International Journal for Research in Applied Science & Engineering Technology (IJRASET), 6 (3). pp. 3462-3471. ISSN 321-9653

Arunkumar, S. and Chandrasekaran, M. and Muthuraman, V and Vinod Kumar, T. (2018) DESIGN OF BACKGEAR MECHANISM IN LATHE. International Journal of Management, Technology And Engineering, 8 (12). pp. 4502-4514. ISSN 2249-7455

Arunkumar, S. and Chandrasekaran, M. and Vinod Kumar, T. (2018) Analysis on Al6061 NI gr aphite composite using squeeze casting method. International Journal of Engineering & Technology, 7 (2). pp. 303-310. ISSN 2227-5258

Arunkumar, S. and Chandrasekaran, M. and Vinod Kumar, T. (2018) Analysis on Al6061-NI-graphite composite using squeeze casting method. International Journal of Engineering & Technology, 7 (2). pp. 303-310. ISSN 1793-8236

Arunkumar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Muthuraman, V (2018) Properties and behavior of squeeze pressure on aluminum molybdenum DI-supplied composite. International Journal of Engineering & Technology, 7 (2.33). pp. 496-502. ISSN 1793-8236

Arunkumar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Muthuraman, V. (2018) Properties and behavior of squeeze pressure on aluminum molybdenum DI-supplied composite. International Journal of Engineering & Technology, 7 (2).

Baskar, S. and Vijayan, V. and Saravanan, S. and Balan, A.V. and Godwin Antony, A. (2018) EFFECT OF AL2O3, ALUMINIUM ALLOY AND FLY ASH FOR MAKING ENGINE COMPONENT. International Journal of Mechanical Engineering and Technology (IJMET), 9 (12). ISSN 0976-6359

Chandrasekaran, M. and Shaisundaram, V S and Karikalan, L. and Ramasubramanian, S. and Baskar, S. (2018) Development of Novel Hybrid Windmill. International Journal of Management, Technology And Engineering.

G. Ramya et al.,, G. Ramya et al., (2018) Shuffled Frog Leaping Algorithm for Solving Optimization of Total Holding Cost in Job Shop Scheduling Problems. International Journal of Mechanical and Production Engineering Research and Development, 8 (2). pp. 751-774. ISSN 2249-6890

Gnanavel, C. and Chandrasekaran, M. and Saravanan, R. (2018) Numerical Exploration of Influence of Phase Changing Material in Heat Transfer Augmentation in the Double Tube Heat Exchanger. International Journal of Engineering, 7 (27). pp. 162-165. ISSN 0975-4024

Godwin Antony, A. and Vijayan, V. and Saravanan, S. and Baskar, S. and Loganathan, M. (2018) ANALYSIS OF WEAR BEHAVIOUR OF ALUMINIUM COMPOSITE WITH SILICON CARBIDE AND TITANIUM REINFORCEMENT. International Journal of Mechanical Engineering and Technology (IJMET), 9 (12). ISSN 0976-6359

Hynes, N. Rajesh Jesudoss and Kumar, R. (2018) Electrochemical Machining of Aluminium Metal Matrix Composites. Surface Engineering and Applied Electrochemistry, 54 (4). pp. 367-373. ISSN 1068-3755

Jacob, S and Shai Sundaram, V.S. and Raghul, B and Ramachandran, S. and Ranjan Radha, M and Baskar, S. (2018) Performance and Exhaust Emission Characteristics of C.I Engine Using Biofuels and Its Diesel Blend with Nano-Additives. Hindawi Advances in Materials Science and Engineering: 11343.

Jeevahan, Jeya and Chandrasekaran, M. (2018) Effect of Olive oil Concentrations on film properties of edible composite films prepared from Corn starch and Olive oil. Research Journal of Pharmacy and Technology, 11 (11). pp. 4934-4938. ISSN 0974-3618

Jeevahan, Jeya and Chandrasekaran, M. and Britto Joseph, G. and Durairaj, R. B. and Mageshwaran, G. (2018) Superhydrophobic surfaces: a review on fundamentals, applications, and challenges. Journal of Coatings Technology and Research, 15 (2). pp. 231-250. ISSN 1547-0091

Joseph Irudaya Raja, S. and Arulmanikandan, A and Sathishkumar, G. and Sivaganesan, S. (2018) FORMABILITY AND THICKNESS DISTRIBUTION ANALYSIS ON ALUMINIUM ALLOY 5052 USING SINGLE POINT INCREMENTAL FORMING. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD). ISSN 2249-6890

Karikalan, L. and Sivaganesan, S. and Ruban, M. and Pugazhenthi, R. (2018) Design and Analysis of Puncture Disc Pressure Vessel. International Journal of Management, Technology And Engineering, 8 (12). ISSN 2249-7455

Manimaran, A and Muthuraman, V and Jayakumar, V (2018) A NOVEL TOLERANCE EVALUATION FRAMEWORK FOR GREEN SUPPLY CHAIN MANAGEMENT IMPLEMENTATION. International Journal of Mechanical Engineering and Technology, 9 (1). ISSN 0976-6359

Muthuraman, V and Sridhar, R. and Palpandian, P and Arunkumar, S. (2018) Influence of Cryogenic LN2 coolant on Chip morphology in Machining 7075 Aluminium alloy. International Journal of Management, Technology And Engineering, 8 (12). pp. 4611-4615. ISSN 2249-7455

Muthuraman, V. and Karunakaran, K and Arunkumar, S. (2018) Performance comparison of various Dry,Paraffin and conventional coolants in turning 6082 Aluminium alloy. International Journal of Management, Technology And Engineering, 8 (12). pp. 4607-4610. ISSN 2249-7455

Nepoleon, V and Prakash, P. (2018) EXPERIMENTAL STUDY OF DIFFUSION BONDING/SUPERPLASTIC FORMING OF DISSIMILAR ALUMINIUM ALLOYS. International Journal of Recent Trends in Engineering & Research, 4. ISSN 2455-1457

Parthiban, A. and Chandrasekaran, M. and Muthuraman, V. and Sathish, S. (2018) Optimization of CO2 Laser Cutting of Stainless Steel Sheet for Curved Profile. Materials Today: Proceedings, 5 (6). pp. 14531-14538. ISSN 22147853

Prakash, P. and Parthiban, A. and Arul Peter, A and Arvind Kishor, T.S (2018) Comparative Analysis of Jatropha-Methanol Mixture and Diesel on Direct Injection Diesel Engine. International Journal of Pure and Applied Mathematics, 119 (16). pp. 4947-4961. ISSN 1314-3395

Prakash, P. and Parthiban, A. and Dhanasekaran, C. and Sivaganesan, S. (2018) CFD ANALYSIS OF CONCENTRIC CIRCULAR TUBE WITH INSERTS. International Journal of Management, Technology And Engineering, 8. pp. 4674-4682. ISSN 2249-7455

Prakash, P. and Parthiban, A. and Varunraj, S. (2018) Investigation on Heat Transfer and Thermal Conductivity Measurement in Lagged Pipe Apparatus. International Journal of Recent Trends in Engineering & Research, 04. ISSN 2455-1457

Prakash, P. and Sivaganesan, S. and Dhanasekaran, C. and Parthiban, A. (2018) VEHICLE OVERTAKING ASSISTANCE SYSTEM. International Journal of Management, Technology And Engineering, 8. pp. 4683-4687. ISSN 2249-7455

Ruban, M. and Sivaganesan, S. and Dhanasekaran, C and Karikalan, L (2018) SOLAR ENERGY STORAGE BY USING PCM MATERIALS WITH FOUCUSING LENS. International Journal of Management, Technology And Engineering, 8 (12).

Ruban, M. and Sivaganesan, S. and Dhanasekaran, C. (2018) Experimental Investigation on Straight Through Solar Salt Water Desalination System Analysis in Different PCM Materials. International Journal of Mechanical and Production Engineering Research and Development, 8 (3). pp. 67-80. ISSN 2249-6890

S. Sharavanan et al.,, S. Sharavanan et al., (2018) Experimental Investigation of Flexural and Hardness Behaviour of Hemp Flax Hybrid Composite. International Journal of Mechanical and Production Engineering Research and Development, 8 (4). pp. 55-60. ISSN 2249-6890

Sathish, S. and Chandrasekaran, M. and Parthiban, A. (2018) Effect of co-digestion agricultural-industrial residues: various slurry temperatures. International Journal of Ambient Energy, 39 (7). pp. 694-697. ISSN 0143-0750

Sathish, S. and Parthiban, A. and Balakrishna, R. and Anandan, R (2018) Development of ANN models for optimization of methane yield from floating dome digester. International Journal of Engineering & Technology, 7 (2.21). p. 316. ISSN 2227-524X

Sathishkumar, G. and Chandrasekaran, M. and Vinod Kumar, T. and Vivek, P. (2018) Vibration and damping characteristics of sisal and glass fiber reinforced polyester composite. International Journal of Engineering & Technology, 7 (2).

Sathishkumar, G. and Sivabalan, S. and Joseph Irudaya Raja, S. and Sivaganesan, S. (2018) VIBRATION AND VISCOELASTIC CHARACTERISTICS OF SISAL FIBER REINFORCED POLYESTER COMPOSITE. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD). pp. 329-338. ISSN 2249-6890

Shaisundaram, V. S. and Chandrasekaran, M. and Mohan Raj, S. and Muraliraja, R. (2018) Investigation on the effect of thermal barrier coating at different dosing levels of cerium oxide nanoparticle fuel on diesel in a CI engine. International Journal of Ambient Energy, 41 (1). pp. 98-104. ISSN 0143-0750

Sharavanan, R. (2018) A Review on Natural Fiber Hybrid Composites. International Journal of Mechanical and Production Engineering Research and Development, 8 (3). pp. 943-948. ISSN 2249-6890

Sivabalan, S. and Sathishkumar, G. and Pugazhenthi, R. and Eriki Ananda, k (2018) Characterization of Multilayer Nano-coating of Piston Ring. International Journal of Pure and Applied Mathematics, 118 (20). pp. 137-144. ISSN 1314-3395

Sivabalan, S. and Sathishkumar, G. and Sivaganesan, S. and Rajagopalan, S. (2018) AERODYNAMIC ANALYSIS OF HORIZONTAL AXIS WIN TURBINE BLADE FOR LOW WIND CONDITION. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD). ISSN 2249-6890

Sivaganesan, S. and Chandrasekaran, M. and Dhanasekaran, C and Parthiban, A. (2018) The Impact of Various Compression Ratio and Influence of Bio Additive With Jatropha Methyl Ester Biodiesel in DI Diesel Engine. International Journal of Mechanical and Production Engineering Research and Development, 8 (1). pp. 989-996. ISSN 2249-6890

Sivaganesan, S. and Chandrasekaran, M. and Ramasubramanian, S. and Gnanavel, C. (2018) The influence of bio additive on the compression ignition engine with diesel and Jatropha methyl ester biodiesel. International Journal of Ambient Energy, 39 (4). pp. 377-381. ISSN 0143-0750

Sivaganesan, S. and Ruban, M. and Dhanasekaran, C and Joseph Irudaya Raja, S. (2018) REVIEW OF RESEARCH AND DEVELOPMENTS OF LATENT HEAT STORAGE SYSTEMS USED IN THE SOLAR DESALINATION SYSTEM. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD). ISSN 2249-8001

Sridhar, R. and Jeevahan, Jeya and Chandrasekaran, M. (2018) Effect of the addition of 1-pentanol on engine performance and emission characteristics of diesel and biodiesel fuelled single cylinder diesel engine. International Journal of Ambient Energy, 41 (1). pp. 58-63. ISSN 0143-0750

Subramaniyan, R. and Kiruthika, N. and Somanathan, T. and Sriraman, V. and Shanmugam, M. (2018) High performance of Graphene oxide from Banana peel against Pseudomonas aeruginosa and Escherichia coli. Research Journal of Pharmacy and Technology, 11 (7). p. 2932. ISSN 0974-3618

Vairavel, M. and Chandrasekaran, M. and Vivek, P. and Vinod Kumar, T. (2018) Empirical performance analysis of VCR engine fuelled with karanja oil and various additives using ANOVA technique. International Journal of Ambient Energy, 41 (4). pp. 369-373. ISSN 0143-0750

Variavel, M and Pugazhenthi, R. and Jayakumar, V. (2018) Experimentation and simulation process of friction stir welding for lightweight similar and dissimilar materials. MATEC Web of Conferences, 172. 04002. ISSN 2261-236X

Varunraj, S. and Kumar, R. and Prakash, P. and Dhansekaran, C. (2018) Design and Vibrational Analysis of Propeller Shaft. International Journal of Management, Technology And Engineering, 8. ISSN 2249-7455

Vijayananth, S. and Ajith Arul Daniel, S. and Muthuraman, R K and Pugazhenthi, R. (2018) ANALYSIS OF MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS IN WEDM OF AL/SIC/MOS2. In: International Journal of Mechanical Engineering and Technology (IJMET). IJMET.

Vinod Kumar, T. and Chandrasekaran, M. (2018) CHARACTERSATION ANALYSIS OF HARDNESS, IMPACT, WATER ABSORBTION NANO CARBON FIBER REINFORCED POLYMER MATRIX COMPOSITES [NCFRPC]. International Journal of Mechanical Engineering and Technology (IJMET), 9 (13). pp. 147-157. ISSN 0976-6359

Vinod Kumar, T. and Chandrasekaran, M. (2018) EVALUATION OF MECHANICAL PROPERTIES ON NANO CARBON WITH FIBER REINFORCED POLYMER MATRIX COMPOSITES. International Journal of Mechanical Engineering and Technology (IJMET), 9 (13). pp. 157-171. ISSN 0976-6359

Vinod Kumar, T. and Chandrasekaran, M. (2018) EVALUATION OF THERMAL AND CHEMICAL PROPERTIES ON NANO CARBON WITH FIBER REINFORCED POLYMER MATRIX COMPOSITES. International Journal of Mechanical Engineering and Technology (IJMET), 9 (13). pp. 172-181. ISSN 0976-6359

Vinod Kumar, T. and Chandrasekaran, M. and Mohanraj, P. and Balasubramanian, Ravishankar and Muraliraja, R. and S. Shaisundaram, V (2018) Fillers preparation for polymer composite and its properties – a review. International Journal of Engineering & Technology, 7 (3.3). pp. 212-217. ISSN 2227-524X

Vinod Kumar, T. and Chandrasekaran, M. and Vivek, P. and Vairavel, M. (2018) Evaluation of Tensile and Thermal Behavior Analysis of Nano Carbon Fiber Reinforced Polymer Composite. International Journal of Engineering & Technology, 7 (3). pp. 157-161. ISSN 2227-524X

Vinod Kumar, T. and Vivekanand, P.A. and Arunkumar, S. and Arul Peter, A (2018) Investigation of CFD Based Flow Analysis of Centrifugal Pump. Investigation of CFD Based Flow Analysis of Centrifugal Pump, 8 (12). pp. 4536-4541. ISSN 2249-7455

Vivek, P. and Saravanan, R. and Chandrasekaran, M. and Pugazhenthi, R. and Vinod Kumar, T. (2018) A HEURISTIC FOR BATCH SCHEDULING WITH UNIFORM AND NON UNIFORM LOT SIZES IN TWO STAGE HYBRID FLOWSHOP. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 97-104. ISSN 0976-6340

Vivek, P. and Saravanan, R. and Chandrasekaran, M. and Pugazhenthi, R. and Vinod Kumar, T. (2018) HEURISTIC FOR CRITICAL MACHINE ORIENTED BATCH SCHEDULING IN TWOSTAGE HYBRID FLOW SHOP. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 120-130. ISSN 0976-6359