Items where Division is "Automobile Engineering" and Year is 2022

Article

Baskar, S. and Ruban, M. and Nethaji, G (2022) Impact of C 45 material manual gear transmissions in two wheeler. Materials Today: Proceedings, 69. pp. 665-667. ISSN 22147853

Bhargavi, Maridu and Vinod Kumar, T. and Ali Azmath Shaik, Reddypalli and Kishore Kanna, S. and Padmanabhan, S. (2022) Effective utilization and optimization of waste plastic oil with ethanol additive in diesel engine using full factorial design. Materials Today: Proceedings, 52. pp. 930-936. ISSN 22147853

Jacob, S and Hemanath, D. (2022) Analysis of nano material based Zeolite catalytic converter and urea injection in single cylinder engine fuelled with diesel and plastic pyrolysis oil. Materials Today: Proceedings, 69 (3): 6945. pp. 888-895. ISSN 22147853

Jacob, S and Thiruvarasan, V. and Surendhar, S. and Senthamizh, R. (2022) Design, analysis and optimization of all terrain vehicle chassis ensuring structural rigidity. Materials Today: Proceedings, 46 (9): 6182. pp. 3786-3790. ISSN 22147853

Kumar, Patnala Padma and Ruban, M. (2022) Investigation on Mechanical Properties of Al5052/BN Metal Matrix Composite. Materials Today: Proceedings, 68. pp. 1252-1255. ISSN 22147853

Kumaresan, Thileep Kumar and Masilamani, Shanmugharaj Andikkadu and Raman, Kalaivani and Karazhanov, Smagul Zh. and Subashchandrabose, Raghu (2022) High performance sodium-ion battery anode using biomass derived hard carbon with engineered defective sites. Electrochimica Acta, 368. p. 137574. ISSN 00134686

Ramasubramanian, S. and Baskar, S. and Santhosh, RS. (2022) Experimental analysis of copper coated helical coiled tube heat exchanger using nanofluid and water. Materials Today: Proceedings, 69. pp. 804-806. ISSN 22147853

Revathy, G and Rajendran, V. and Rashmika, B. and Sathish Kumar, P. and Parkavi, P. and Shynisha, J. (2022) Random Forest Regressor based superconductivity materials investigation for critical temperature prediction. Materials Today: Proceedings, 66. pp. 648-652. ISSN 22147853

Ruban, M. and Shaisundaram, V.S. and Senthamizh, R. (2022) Analysis of laminated plain carbon steel leaf spring in maxi truck. Materials Today: Proceedings, 69. pp. 700-702. ISSN 22147853

Shaisundaram, V. S. and Balambica, V. and Sendil Kumar, D. and Nithish, S. and Chandrasekaran, M. and Shanmugam, Mohanraj and Likassa, Dabala Misgana and B, Deepanraj (2022) Optimization of Dual Coating Using Electroless Ni‐P‐Nano‐TiO 2 and Plasma Yttria‐Stabilized Zirconia on Piston Crown and Cylinder Liner in CI Engine. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Shaisundaram, V. S. and Saravanakumar, S. and Balambica, V. and Sendil Kumar, D. and Chandrasekaran, M. and Muraliraja, R. and Muniappan, A. and Asres, Yalew and Vijayan, V. (2022) Effects of Thermal Barrier Coating Using Various Dosing Levels of Aluminium Oxide Nanoadditive Fuel on Diesel in Compressed Ignition Engine. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Shaisundaram, V.S. and Chandrasekaran, M. and Sujith, S. and Praveen Kumar, K.J. and Shanmugam, Mohanraj (2022) Design and analysis of novel biomass stove. Materials Today: Proceedings, 46. pp. 4054-4058. ISSN 22147853

Shaisundaram, VS. and Ramasubramanian, S. and Srinath, R. (2022) Design and analysis of composite materials based piston. Materials Today: Proceedings, 69. pp. 783-785. ISSN 22147853

Veerasamy, Shamprasshaath Shaisundaram and Manoharan, Chandrasekaran and Krishnaraj, Hemalatha and Lazar, Martin (2022) Thermal barrier coating using yttria stabilized zirconia by plasma spray technique. Thermal Science, 26 (2 Part). pp. 871-882. ISSN 0354-9836

Book Section

Shaisundaram, V. S. and Chandrasekaran, M. and Hariharan, C. and Shanmugam, Mohanraj and Sujith, S. and Praveen Kumar, K. J. (2022) Automatic Flame Suppression System for Four Wheeler Passenger Vehicles. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 625-630.

Shaisundaram, V. S. and Karikalan, L. and Ramasubramanian, S. and Baskar, S. and Balaji, R. (2022) Design and Analysis of a Panel Using FEA. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 31-37.

Conference or Workshop Item

Baskar, S. and Maridurai, T. and Arivazhagan, R. and SivaChandran, S. and Venkatesh, R. (2022) Thermal management of solar thermoelectric power generation. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.

Baskar, S. and Ruban, M. and Rajesh Kumar, D and Rakesh Kumar, R (2022) REVIEW OF PHASE CHANGE MATERIALS IN HEAT TRANSFER APPLICATIONS. In: NCRAET’22.

Baskar, S. and Shankara Narayanan, R and Padmanabhan, S (2022) Laser Ignition System by Using Composite Ceramics for Combustion Engine. In: iCAM 2022.

Baskar, S. and Vinoth Bresnav, K. and P, Sambandam (2022) Investigation on testing and analysis of polypropylene fibre under tensile. In: iCAM 2022. (In Press)

Ruban, M. and Baskar, S. and Balachandran, P and Deepanchakaravarthi, R (2022) PERFORMANCE ANALYSIS AND CHARACTERISTICS OF A DOMESTIC REFRIGERATION SYSTEM USING NANO-LUBRICANT ZIRCONIUM OXIDE (ZRO2) AS AN ADDITIVE. In: NCRAET’22.

Ruban, M. and Baskar, S. and Thebesh, S (2022) Enhancement of an environmentally friendly polymer rubber hybrid composite. In: iCAM 2022.

Venugopal, S. and Baskar, S. and Pulipaka Neel Fordham, Samuel (2022) Study on the mechanical behaviour of Metal Matrix Composites (MMC). In: iCAM 2022.