Items where Author is "Baskar, S."

Article

Kamaraj, Sathish and Baskar, S. and Ponnarengan, Hariharasakthisudhan and Kamaraj, Logesh and Katharbasha, Sathickbasha (2025) Tribological performance optimization of AZ91/TiB 2 magnesium matrix composites using stacked ensemble learning and Bayesian methods. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. ISSN 1350-6501

Kamaraj, Sathish and Baskar, S. and Ponnarengan, Hariharasakthisudhan and Kamaraj, Logesh and Katharbasha, Sathickbasha (2025) Wear performance and optimization of h-BN-modified AZ91/TiB 2 magnesium composites under dry sliding conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. ISSN 1350-6501

Vellaichamy, Ramesh and Rajagopal, Pugazhenthi and Selvarani, A. Geetha and Veeranjaneyulu, Itha and Raj, J. Immanuel Durai and Balaji, E. and Alwetaishi, Mamdooh and Baskar, S. and Sivalingam, Krishna Moorthy and Elumalai, P. V. (2025) Investigation mechanical properties and on surface roughness during WEDM machining of nano Cr2C3-MoS2 hybrid metal matrix composites. Scientific Reports, 15 (1). ISSN 2045-2322

Baskar, S. and Subbiah, Ganesan and G, Padma Priya and J, Guntaj and Kumar, Mukesh and K, Kamakshi Priya and Kaliappan, Nandagopal (2025) Development and characterization of an epoxy matrix composite reinforced with Al2O3 embedded banyan fibers for secondary structural applications. Results in Engineering, 26. p. 105587. ISSN 25901230

Soundarya, M. K. and Logeshkumaran, A. and Chakravarthy, P. R. Kalyana and Elumalai, P. V. and Baskar, S. and Reddy, J. Anil and Prabhakar, S. and Yu, Liu (2025) An investigation study on residential buildings for cost overrun. Scientific Reports, 15 (1). ISSN 2045-2322

Baskar, S. and A, Raman and M, Karthick and N, Lenin and Kumar, Rajesh and Rohini, B. and Chandrasekaran, M. and A, Uma Devi and Sudharsan, Meenambiga Setti and Ruban, M. (2025) Enhancing machining efficiency of UNS S45000 alloy steel using cryogenically treated TiAlSiN coated tungsten carbide inserts. Results in Engineering, 25. p. 104415. ISSN 25901230

Baskar, S. and Jayaprabakar, J. and A, Raman. and Rajan, T. Surulivel and Kumar, J Aravind and U, Nalini Ramachandran and E, Balaji and Sambandam, Padmanabhan and PK, Jisha and Ruban, M. (2025) Possible bio cathode materials for usage in microbial fuel cells towards energy generation and wastewater treatment to sustain environment: A review. Results in Engineering, 25. p. 104161. ISSN 25901230

Baskar, S. and S, Padmanabhan and Raman, A. and M, Venkatesan and S, Ganesan and Kumar, K.M. and S, Mahalingam (2025) A circular economy approach to energy recovery from polymer waste with oxygenated additives as a sustainable fuel. Results in Engineering, 25. p. 104516. ISSN 25901230

Baskar, S. and Majid, Mohd. and Raman, Arasu and Babu, L. Ganesh and Selvaraj, Mahalingam and Sambandam, Padmanabhan and Punitha, N. and Vijayaraj, S. and Anish, M. and Deepak, J.R. (2024) Development of synthesized fuels based on diesel by incorporating zinc oxide nanoparticles, surfactant and ethyl acetate. Results in Engineering, 24. p. 103633. ISSN 25901230

Yaduwanshi, Deepak Kumar and Rao, Chennu Rama Mohan and Naidu, S. C. V. Ramana Murty and Sakharwade, Sanjay G. and Sharma, Sumit and Khalkar, V. and Baskar, S. and Kaliyaperumal, Gopal (2024) Thermal evaluation of aluminum welding: a comparative study of friction stir welding (FSW), plasma-fsw, and tungsten inert gas (TIG)-FSW techniques. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (8). pp. 5501-5513. ISSN 1955-2513

SathishKumar, G. and Prashanth, K. S. and Khatoon, Umme Thahira and Selvarani, A. Geetha and Sridhar, R. and Sivabalan, S. and Chakravarthy, P. R. Kalyana and Vijayan, V. and Baskar, S. (2024) Investigation of mechanical properties, viscoelastic properties and free vibration analysis of natural fibre reinforced composite materials. Interactions, 245 (1). ISSN 3005-0731

Baskar, S. and Al Khadouri, Salim Saleh Said and Arokiasamy, Dr. Anantha Raj A. and Raman, Dr. Arasu (2024) Adaptive Mobility and Reliability-based Routing Protocol for Smart Healthcare Management Systems in Vehicular Ad‐hoc Networks. Journal of Wireless Mobile Networks, Ubiquitous Computing, and Dependable Applications, 15 (3). pp. 150-159. ISSN 20935374

Raman, Dr. Arasu and Yi Ting, Nick Wong and Balakrishnan, Dr. Rajani and Baskar, S. and Arumugam, Dr. Vijayesvaran (2024) Intelligent Resource Monitoring and Control Method in Vehicular Ad-hoc Networks for Electric Vehicle Enabled Microgrids. Journal of Wireless Mobile Networks, Ubiquitous Computing, and Dependable Applications, 15 (3). pp. 50-59. ISSN 20935374

Sivakumar, V. and Visagavel, K. and Kumaraswamy, J. and Balaji, E. and Khalkar, V. and Gnanavel, C. and Kalyana Chakravarthy a, P. R. and Baskar, S. and Vijayan, V. (2024) Correction to: Performance study and analysis of Al2O3 Nanofluid under different flow conditions. Interactions, 245 (1). ISSN 3005-0731

Sambandam, Padmanabhan and Punitha, Narayanasamy and Vijetha, K. and Baskar, S. and Shamprasshaath, Shaisundaram Veerasamy and Seikh, A. H. and Ifseisi, Ahmad A. and Sharma, Abhishek (2024) Effect of Graphite Nanoadditives on the Behavior of a Diesel Engine Fueled with Pyrolysis Fuel Recovered from Used Plastics. ACS Omega. ISSN 2470-1343

Sivakumar, V. and Visagavel, K. and Kumaraswamy, J. and Balaji, E. and Khalkar, V. and Gnanavel, C. and Chakravarthy, P. R. Kalyana and Baskar, S. and Vijayan, V. (2024) Performance study and analysis of Al2O3 Nanofluid under different flow conditions. Interactions, 245 (1). ISSN 3005-0731

Prakash, P. and Elumalai, P.V. and Chelladurai, Hariharan and Josephine, Golden Renjith Nimal Renjith and Velumayil, Ramesh and Asif, Mohammad and Kit, Chan Choon and Venkatesan, Balambica and Rajagopal, Sabarish and Baskar, S. and Reddy, M. Venkateswar and S, Prabhakar (2024) Parameter fine tuning on CRDI engine operated with blends of grape biodiesel and diesel. Case Studies in Thermal Engineering, 60. p. 104701. ISSN 2214157X

Vikas, KHALKAR and Arul, MOSHI and Jyoti, BORDE and Raman, BANE and Lalitkumar, JUGULKAR and Baskar, S. (2024) Crack Identification in a Structural Beam Using Regression and Machine Learning Models. Romanian Journal of Acoustics and Vibration, 21 (1).

Padmanabhan, S. and Joel, C. and Mahalingam, S. and Ganesan, S. and Baskar, S. (2024) Sustainable Energy Solutions from Water Hyacinth Bioethanol Blends in Diesel Engines with Nano-Coated Pistons. International Research Journal of Multidisciplinary Scope, 05 (01). pp. 671-682. ISSN 2582631X

Jayaraman, Jayaprabakar and Kumaraswamy, J. and Rao, Yarrapragada K. S. S. and Karthick, M. and Baskar, S. and Anish, M. and Sharma, Abhishek and Yadav, Anil Singh and Alam, Tabish and Ammarullah, Muhammad Imam (2024) Wastewater treatment by algae-based membrane bioreactors: a review of the arrangement of a membrane reactor, physico-chemical properties, advantages and challenges. RSC Advances, 14 (47). pp. 34769-34790. ISSN 2046-2069

Padmanabhan, S. and Boopathi, Balaji and Kumar, K. M. and J. R., Deepak and Vinod Kumar, T. and Baskar, S. (2023) Investigation of alloy materials on a sports bike wheel rim designs using finite element analysis. Multidisciplinary Science Journal, 6 (2). p. 2024013. ISSN 2675-1240

S, Durgalakshmi and T, Ilango and R, N. Pugazhenthi and Singh, Ajay Partap and Baskar, S. and Padmanabhan, S. and Vijayan, V. (2023) Study on The Application of Processed Municipal Solid Waste Ash for Sustainable Construction Materials. E3S Web of Conferences, 399. 03017. ISSN 2267-1242

Kumar, Sujeet and Karnwal, Sandeep and Swami, Sujeeth and Punitha, N. and Padmanabhan, S. and Vijayan, V. and Baskar, S. (2023) A Sustainable Development Perspective and Evaluating the Impact of Laser Cladding Parameters on Mild Steel. E3S Web of Conferences, 399. 03013. ISSN 2267-1242

Padmanabhan, S. and Joel, C. and Mahalingam, S. and Deepak, J. R. and Baskar, S. and Ruban, M. (2023) Effects of Flex Fuel in Light Duty Power Generators on the Environment and Circular Bio-Economy. Nature Environment and Pollution Technology, 22 (2). pp. 879-886. ISSN 23953454

Karthick, M. and Siva Ramakrishna, Ch. and Pugazhenthi, R. and Gudadhe, Nitin and Baskar, S. and Renu, F and Kumar, Rajan (2023) Contact stress analysis of xylon coated spur gear using ANSYS workbench. Materials Today: Proceedings. ISSN 22147853

Padmanabhan, S. and Selvamuthukumar, M. and Gopi Krishna, B. and Kumar, Manoj and Sudheer, K. and Baskar, S. and Mishra, Rahul and Anupam Rao, Y. (2023) Enhancement of engine performance by nano-coated pistons fuelled with nano-additive biodiesel blends. Materials Today: Proceedings. ISSN 22147853

Baskar, S. and Vinoth, K. and Sambandam, P. (2023) Investigation on testing and analysis of polypropylene fibre under tensile load. Materials Today: Proceedings. ISSN 22147853

Venugopal, S. and Baskar, S. and Samuel, Pulipaka Neel Fordham (2023) Study on the mechanical behaviour of metal matrix composites (MMC). Materials Today: Proceedings. ISSN 22147853

Chandran, Jishu and Manikandan, K. and Ganesh, R. and Baskar, S. (2022) Effect of nano-material on the performance patterns of waste cooking biodiesel fuelled diesel engine. International Journal of Ambient Energy, 43 (1). pp. 2226-2230. ISSN 0143-0750

Baskar, S. and V.Vijayan, t and Isaac Premkumar, I.J. and Arunkumar, D. and Thamaran, Dowhi (2022) Design and material characteristics of hybrid electric vehicle. Materials Today: Proceedings, 37. pp. 351-353. ISSN 22147853

Karikalan, L. and Baskar, S. and Poyyamozhi, N. and Negash, Kassu (2022) Experimental Analysis of Heat Transfer by Using Nanofluid and Impact of Thermophysical Properties. Journal of Nanomaterials, 2022 (1). ISSN 1687-4110

Ramasubramanian, S. and Baskar, S. and Santhosh, RS. (2022) Experimental analysis of copper coated helical coiled tube heat exchanger using nanofluid and water. Materials Today: Proceedings, 69. pp. 804-806. ISSN 22147853

Ramasubramanian, S. and Shai Sundram, V.S. and Karikalan, L. and Baskar, S. and Kumar Sahu, Sandip and Borkar, Dilip S. and Kumar, Prashant (2022) Experimental analysis of nano additive blended in Mahua oil biodiesel on engine characteristics. Materials Today: Proceedings, 63. pp. 535-541. ISSN 22147853

Baskar, S. and Ruban, M. and Nethaji, G (2022) Impact of C 45 material manual gear transmissions in two wheeler. Materials Today: Proceedings, 69. pp. 665-667. ISSN 22147853

Balambica, V. and Baskar, S. and Padmanabhan, S. and Lal Rinawa, Moti and Borkar, Dilip S. and Sharma, Abhishek and Ruban, M. (2022) Study on tribological characteristics of Bio-Lubricant formed from Brassica napus oil. Materials Today: Proceedings, 62. pp. 1544-1549. ISSN 22147853

Ramasubramanian, S. and Chandrasekaran, M. and Baskar, S. and Dowhithamaran, A. and Ravin, L (2021) Design and development of pneumatic compressed air vehicle. Materials Today: Proceedings, 37. pp. 690-693. ISSN 22147853

V., Santhanam and R., Dhanaraj and M., Chandrasekaran and N., Venkateshwaran and Baskar, S. (2021) Experimental investigation on the mechanical properties of woven hybrid fiber reinforced epoxy composite. Materials Today: Proceedings, 37. pp. 1850-1853. ISSN 22147853

Satish, S. and John Alexis, S. and Bhuvendran, Arun and Shanmugam, Mohanraj and Baskar, S. and Shaisundaram, V.S. (2021) Design and analysis of mild steel mini truck body for increasing the payload capacity. Materials Today: Proceedings, 37. pp. 1274-1280. ISSN 22147853

Ramasubramanian, S. and Santhosh Kumar, S. and Karikalan, L. and Baskar, S. (2021) Performances emissions behaviors of Compression ignition engine by mahua oil. Materials Today: Proceedings, 37. pp. 982-985. ISSN 22147853

Shaisundaram, V.S. and Chandrasekaran, M. and Muraliraja, R. and Shanmugam, Mohanraj and Baskar, S. and Bhuvendran, Arun (2021) Investigation of Tamarind Seed Oil biodiesel with aluminium oxide nanoparticle in CI engine. Materials Today: Proceedings, 37. pp. 1417-1421. ISSN 22147853

Sridhar, R. and Shaisundaram, V.S. and Baskar, S. and Ramasubramanian, S. and Sathiskumar, G. and Sivabalan, S. (2021) Investigation of grape seed oil biodiesel with cerium oxide nanoparticle in CI engine. Materials Today: Proceedings, 37. pp. 1399-1402. ISSN 22147853

Prabhakaran, A. and Krishnan, K. Sridhivya and Dhinakaran, R. and Baskar, S. and Shaisundaram, V.S. (2021) Analysis of the efficiency of an automotive alternator by replacing Mild steel into aluminum as a material for rotor. Materials Today: Proceedings, 37. pp. 1269-1273. ISSN 22147853

Dhinakaran, R. and Muraliraja, R. and Elansezhian, R. and Baskar, S. and Satish, S. and Shaisundaram, V.S. (2021) Utilization of solar resource using phase change material assisted solar water heater and the influence of nano filler. Materials Today: Proceedings, 37. pp. 1281-1285. ISSN 22147853

Dhanaraj, R. and Venkateshwaran, N. and Chenthil, M. and Natarajan, M.S. and Santhanam, V. and Baskar, S. (2021) Experimental investigation on the mechanical properties of glass fiber with perforated aluminum sheet reinforced epoxy composite. Materials Today: Proceedings, 37. pp. 1880-1883. ISSN 22147853

Sridhar, R. and Baskar, S. and Shaisundaram, V.S. and Karunakaran, K. and Ruban, M. and Joseph Irudaya Raja, S. (2021) Design and development of material behavior of line follower automated vehicle. Materials Today: Proceedings, 37. pp. 2193-2195. ISSN 22147853

Premkumar, I. J. Isaac and Baskar, S. and Saravanan, R. and Vijayan, V. and Parthiban, A. and Sathish, T. (2021) Dwindling setup time through a low-cost mechanization – A case study. Dwindling Setup Time through a Low-Cost Mechanization – A Case Study. 020068.

Baskar, S. and Karikalan, L. and Vijayan, V. and Arunkumar, D. and Sukenraj, K. (2021) Performance, emission characteristics of compressed ignition engine with alternative fuel. Materials Today: Proceedings, 37. pp. 995-998. ISSN 22147853

Baskar, S. and Parthiban, A. and Saravanan, R. and Vijayan, V. and Sathish, T. (2021) Influence of chemical treatment in synthesize and characterization sisal/glass hybrid composite. Influence of Chemical Treatment in Synthesize and Characterization Sisal/Glass Hybrid Composite. 020065.

Karikalan, L. and Chandrasekaran, M. and Venugopal, S. and Jacob, S and Baskar, S. (2021) Investigations on diesel engine characteristics with Pongamia biodiesel at dissimilar compression ratios. International Journal of Ambient Energy, 42 (9): 9154. pp. 1005-1008. ISSN 0143-0750

Vijayan, V. and Sathish, T. and Saravanan, R. and Premkumar, I. J. Isaac and Baskar, S. and Parthiban, A. (2021) Synthesize and characterizations of glass/treated selective sisal fiber hybrid composite. Synthesize and Characterizations of Glass / Treated selective Sisal Fiber Hybrid Composite. 020066.

Sathish, T. and Premkumar, I. J. Isaac and Saravanan, R. and Baskar, S. and Parthiban, A. and Vijayan, V. (2021) Multiply of process speed, quality and safety through low-cost automation – A case study. Multiply ofProcess Speed, Quality and Safety through Low- Cost Automation –A Case Study. 020067.

Baskar, S. and Kumar, D. Sendil and Dhinakaran, R. and Prabhakaran, A. and Arun, B. and Shanmugam, Mohanraj (2021) Experimental studies on mechanical and morphological property of the natural and SBR/BR hybrid rubber. Materials Today: Proceedings, 37. pp. 1503-1506. ISSN 22147853

Selvamuthukumar, M. and Harish babu, B. and bobba, Sujith and Baskar, S. and Joy, Nivin (2021) Investigation on the lubricating behavior of cashew nut shell liquid oil as a renewable and reliable petrochemical product. Materials Today: Proceedings, 44. pp. 3583-3588. ISSN 22147853

Karikalan, L. and Chandrasekaran, M. and Baskar, S. (2021) Studies on CI engine characteristics with waste cooking oil as biomaterial. Materials Today: Proceedings, 37. pp. 565-567. ISSN 22147853

Baskar, S. and Loganathan, Karikalan (2021) Synthesis of multi wall carbon nanotubes nanofluid by using two step method. Thermal Science, 24 (1 Part). pp. 519-524. ISSN 0354-9836

Arunkumar, D. and Ramu, M. and Murugan, R. and Kannan, S. and Arun, S. and Baskar, S. (2020) Investigation of heat transfer of wall with and without using phase change material. Materials Today: Proceedings, 33. pp. 2646-2650. ISSN 22147853

Baskar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Vivek, P. and Karikalan, L. (2020) Experimental studies on convective heat transfer coefficient of water/ethylene glycol-carbon nanotube nanofluids. International Journal of Ambient Energy, 41 (3). pp. 296-299. ISSN 0143-0750

Baskar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Vivek, P. and Ramasubramanian, S. (2020) Experimental studies on flow and heat transfer characteristics of secondary refrigerant-based CNT nanofluids for cooling applications. International Journal of Ambient Energy, 41 (3). pp. 285-288. ISSN 0143-0750

Karikalan, L. and Jacob, S and Baskar, S. and Venugopal, S. (2020) Analyzing the influence of varied fuel injection pressure on diesel engine fueled with Karanja biodiesel. Materials Today: Proceedings, 21: 5307. pp. 291-294. ISSN 22147853

Jacob, S and Karikalan, L. and Baskar, S. (2020) Fabrication and tensile testing of composite hybrid joints. Materials Today: Proceedings, 21: 5241. pp. 612-615. ISSN 22147853

Jacob, S and Karikalan, L. and Baskar, S. and Gnanavel, C. (2019) Damping Characteristics of Laminated Semi-Cylindrical Shells: Technical Note. International Journal of Vehicle Structures and Systems, 11 (3): 8816. ISSN 0975-3060

Logesh, K. and Baskar, S. and Azeemudeen, M. and Praveen Reddy, B. and Venkata Subba Sai Jayanth, Gajavalli (2019) Analysis of Cascade Vapour Refrigeration System with Various Refrigerants. Materials Today: Proceedings, 18. pp. 4659-4664. ISSN 22147853

Vijayan, V. and Saravanan, S. and Godwin Antony, A. and Loganathan, M. and Baskar, S. (2019) HEAT TRANSFER ENHANCEMENT IN MINI COMPACT HEAT EXCHANGER BY USING ALUMINA NANOFLUID. International Journal of Mechanical Engineering and Technology (IJMET), 10 (1). ISSN 0976-6359

Logesh, K. and Baskar, S. and Yuvan Siddarth, B. and Arun Sherwin, K. and Naresh, P. (2019) Multi-walled carbon nanotube mixed with isopropyl alcohol Nano fluid for heat transfer applications. Materials Today: Proceedings, 18. pp. 4690-4694. ISSN 22147853

Logesh, K. and Baskar, S. and Krithick Vignesh, R. and Jagadeesh, Mekala and Anand Ratna Kumar, Gantyada and Damodar Reddy, S. (2019) Performance Analysis Flow and Heat Transfer Characteristics of Secondary Refrigerant Based SiO2 Nanofluid. Materials Today: Proceedings, 18. pp. 4683-4689. ISSN 22147853

Godwin Antony, A. and Vijayan, V. and Saravanan, S. and Baskar, S. and Loganathan, M. (2018) ANALYSIS OF WEAR BEHAVIOUR OF ALUMINIUM COMPOSITE WITH SILICON CARBIDE AND TITANIUM REINFORCEMENT. International Journal of Mechanical Engineering and Technology (IJMET), 9 (12). ISSN 0976-6359

Baskar, S. and Vijayan, V. and Saravanan, S. and Balan, A.V. and Godwin Antony, A. (2018) EFFECT OF AL2O3, ALUMINIUM ALLOY AND FLY ASH FOR MAKING ENGINE COMPONENT. International Journal of Mechanical Engineering and Technology (IJMET), 9 (12). ISSN 0976-6359

Jacob, S and Shai Sundaram, V.S. and Raghul, B and Ramachandran, S. and Ranjan Radha, M and Baskar, S. (2018) Performance and Exhaust Emission Characteristics of C.I Engine Using Biofuels and Its Diesel Blend with Nano-Additives. Hindawi Advances in Materials Science and Engineering: 11343.

Book Section

Baskar, S. and SivaramKrishnan, M and Sivakumar, V and Surendar, S and Gopalakrishnan, K (2025) Mechanical and Thermal Evaluation of Nanocomposite Coatings for Wheelchair Components. In: Frontiers of Multidisciplinary Studies for Global Sustainability. SRR. ISBN 978-81-993402-7-5

Aarthi, V. and Chandrasekaran, R. and Vivek, Pazhamalai and Yuvaraj, D. and Baskar, S. and Ivo Romauld, S (2025) Herbal Polymer- Infused Hydrogel Dressings for Enhanced Wound Healing. In: Applications of Herbal Excipients and Polymers in Wound Healing. IGI Global Scientific Publishing, pp. 213-246. ISBN 9798337339771

Ajith Arul Daniel, S. and Sridhar, R. and Arun Kumar, A and Baskar, S. and Aravind, Y and Venkatesh, J (2025) Development of a Low-Cost Rehabilitation Device for Stroke Patients: ROBO REHEB (MOBAID). In: Advancing Science and Technology through Multidisciplinary Innovation toward the Future. SRR. ISBN 978-81-987134-6-9

Dinesh, C M and Chandrasekaran, M. and Baskar, S. and Sridhar, R. and Ruban, M and Arun Vikram, M P (2025) Lightweight Magnesium Alloy Composites for Enhanced Automobile Performance and Fuel Efficiency. In: Advancing Science and Technology through Multidisciplinary Innovation toward the Future. SRR.

Sangeetha, T. and Somanathan, T. and Raman, A. and Bhavya, P and Baskar, S. (2025) Sustainable Communication Systems and 5G Technology. In: Strategies for Sustainable Development and Environmental Sciences. SRR.

Kumaraswamy, J. and Siva Ramakrishna, Ch. and Ramasubramanian, S. and Mishra, Rahul and Sakhare, D. T. and Karthik, K. and Baskar, S. and Pandey, Krishna Kant (2025) Design and Analysis of Gudgeon Pin to Minimize Stress Concentration by Selecting Different Material Through FEA. In: Lecture Notes in Mechanical Engineering ((LNME)). Springer Nature Link, pp. 339-352.

Baskar, S. and Venugopal, S and ShaiSundaram, V.S. and Jacob, S and Sathya Narayanan, M and Jeeva, R and Madhankumar, G (2025) Developing Thorium- Powered Commercial Transport Vehicle for Commercial Use. In: Developing Thorium- Powered Commercial Transport Vehicle for Commercial Use. Imaginex Inks Publication.

Ruban, M and Sridhar, R and Karikalan, L and Baskar, S. and Vijayaraj, S. and Soundarya, M.K. (2025) Molten Salt Breakthrough Harnessing Energy with Thorium. In: Molten Salt Breakthrough Harnessing Energy with Thorium. Amazon Publications.

Sripriya, S and Namdev Satyappa, Madane and Gnanam, S and Prakash, K. and Shaisundaram, V S and Baskar, S. (2024) AI’s Role in Engineering Innovations for Social Development. In: Emerging Trends in Multidisciplinary Technology and Science. SRR. ISBN 978-81-980792-1-3

Bhuvana, R. and Hemalatha, R. J. and Baskar, S. and Kosalaram, Krishnakumar (2024) Introduction to Smart Hospital. In: Artificial Intelligence‐Enabled Blockchain Technology and Digital Twin for Smart Hospitals. Wiley, pp. 1-18. ISBN 9781394287420

Premnath, S. P. and Omkar Appasaheb, Jarali and Baskar, S. and Prakash, P (2024) AI-Powered Predictive Maintenance in Mechanical Systems. In: Emerging Trends in Multidisciplinary Technology and Science, Volume I, 2024. SRR.

Baskar, S. and Venugopal, S. and Karikalan, L. and Arun Kumar, S and Senthilkkumaran, J and Shanmugaperumal, R and Vibin, I (2024) Advanced Segregation of Defective Cigarettes: Integrating Image Processing and Machine Learning. In: Revolutionizing the Future Trends in Mechanical Engineering, Volume II, 2024. SRR. ISBN 978-81-974501-0-5

Soundarya, M.K and Sampath Kumar, V and Padmalosan, P and Durgalakshmi, Sagayakannan and Baskar, S. (2024) Contemporary Catastrophes: A Comprehensive Examination of Recent Global Disasters. In: Emerging Trends in Multidisciplinary Engineering: A Comprehensive Overview, 2024. SRR. ISBN 978-81-964923-5-9

Ashok Kumar, R and Ramasubramanian, S. and Karikalan, L. and Baskar, S. (2024) Design and Analysis of Ascent Assist Control in Automobile Vehicles. In: Intelligent Systems and Multidisciplinary Strategies for Effective Business and Industry, 2024. SRR. ISBN 978-81-970420-1-0

Ramasubramanian, S. and Shaisundaram, V S and Mohanraj, A and Baskar, S. and Suriyadharshini, S. and Nishal, V and Suresh, H (2024) Design and Fabrication of Adaptive Cruise Control. In: Emerging Trends in Multidisciplinary Technology and Science. SRR.

Ruban, M and Jacob, S and Manikandan, S and Kannan, S.P and Sivabalan, S. and Baskar, S. (2024) Driver Fatigue Detection System using Eye Movement Sensors. In: Recent Developments in Mechanical Science and Automotive Technology, 2024. SRR. ISBN 978-81-980792-3-7

Madhumita, G and Balakrishnan, Ponnusamy and Jagadeesh, P and Tonykanniah, D and Manikkavasakan, V. and Aravinth Kumar, A and Nithish Kumar, R and Lalith Kumar, P and Baskar, S. (2024) Market Entry Strategies for Electric Vehicles: An MBA Approach to Penetrating the Automotive Industry. In: Emerging Technologies in Automotive and Mechanical Sciences, Volume IV. SRR. ISBN 978-81-970420-4-1

Jacob Soman, Saini and Anish Krishnamurthi, V S and Ramasubramanian, S. and Baskar, S. and Shaisundaram, V S and Venugopal, S (2024) Materials Innovations for Light weighting in Automotive Design: A Sustainable Approach. In: Emerging Technologies in Automotive and Mechanical Sciences, Volume IV. SRR. ISBN 978-81-970420-4-1

Shaisundaram, V.S and Suresh, J and Karikalan, L. and Jacob, S and Baskar, S. (2024) Optimizing Fuel Efficiency in Hybrid Electric Vehicles a Comparative Analysis of Control Strategies. In: Emerging Technologies in Automotive and Mechanical Sciences, Volume IV. SRR. ISBN 978-81-970420-4-1

Sasikala, K. and Sridhar, R. and Somanathan, T. and Jagadeesh, P and Baskar, S. (2024) The Role of Electrical Engineering in Renewable and Smart Energy Systems. In: Emerging Trends in Multidisciplinary Engineering: A Comprehensive Overview. SRR.

Jacob, S. and Shreeram, P and V.Sivakumar, V and Baskar, S. (2024) Study and Analysis of Automatic Track-Guided Vehicles for Industrial Applications. In: Intelligent Systems and Multidisciplinary Strategies for Effective Business and Industry, 2024. SRR.

Baskar, S. and Mohamed Arshad, A and Rajesh Kumar, DV (2023) Design and Analysis of Sustainable Combat UAV. In: Strategies for Sustainable Development and Environmental Sciences - Volume I. SRR. ISBN 978-81962098-2-7

Karikalan, L. and Baskar, S. and Ramasubramanian, S. and Shaisundaram, V.S. (2023) Diesel Engine Connecting Rod Design, Development and Analysis Using CAE Tools. In: Emerging Technologies in Automotive and Mechanical Sciences - Volume I. SRR. ISBN 978-81-962098-1-0

Shaisundaram, V. S. and Karikalan, L. and Ramasubramanian, S. and Baskar, S. and Balaji, R. (2022) Design and Analysis of a Panel Using FEA. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 31-37.

Padmanabhan, S. and Selvamuthukumar, M. and Ganesan, S. and Baskar, S. and Sharma, Abhishek (2022) Investigation of Heat Transfer Characteristics in Double Tube Heat Exchanger with Helical Turbulator Using CFD. In: Advancement in Materials, Manufacturing and Energy Engineering, Vol. II. Springer, pp. 531-541.

Karthick, M. and Logesh, K. and Baskar, S. and Sharma, Abhishek (2022) Performance and Emission Characteristics of Single-Cylinder Diesel Engine Fueled with Biodiesel Derived from Cashew Nut Shell. In: Advancement in Materials, Manufacturing and Energy Engineering, Vol. II. Springer, pp. 521-529.

Logesh, K. and Karthick, M. and Baskar, S. and Sharma, Abhishek (2022) Performance and Emissions Characteristics of Diesel Engine Run on Citrullus Colocynthis Biodiesel with Zinc Oxide Additive. In: Advancement in Materials, Manufacturing and Energy Engineering, Vol. II. Springer, pp. 513-520.

Baskar, S. and Karikalan, L. (2021) Thermo-Physical Properties of Al2O3 and Preparation Technique. In: Lecture Notes in Mechanical Engineering. springer, pp. 705-710.

Conference or Workshop Item

Sivaram, A.R and Uma Devi, A and Raghul, B and Prabakaran, S and Prakash, Paramasivam and Prabaharan, M and Baskar, S. (2025) DESIGN AND ANALYSIS OF A STEERING KNUCKLE COMPONENT FOR AN OFF-ROAD VEHICLE. In: 2nd International Conference on Multidisciplinary Science and Technology towards Sustainability ICMSTS 2025, March 23, 2025.

Sathish, K and Baskar, S. and Hariharasakthisudhan, P and Logesh, K. and Sathickbasha, K (2025) Tribological Optimization of AZ91/TiB₂ Magnesium Matrix Composites Using Stacked Ensemble Learning and Bayesian Optimization. In: International Conference on Advanced Materials for Susutainable Future (ICAMSF-2025) 28th- 29th March, 2025.

Sathish, K and Baskar, S. and Hariharasakthisudhan, P and Logesh, K. and Sathickbasha, K (2025) Wear Performance and Optimization of hBN-Modified AZ91/TiB₂ Magnesium Composites Under Dry Sliding Conditions. In: International Conference on Advanced Materials for Susutainable Future (ICAMSF-2025) 28th- 29th March, 2025.

Baskar, S. and Megaraj, Meikandan and Manjunathan, Karthick and Chandrasekaran, M. and Anish, M. and Umamaheswarrao, P. and Giri, Jayant and Ali Samhan, Ahmad Abdelhafiz (2024) Hardening Characteristics of 16MnCr5 Metals for Engine Block. In: 2024 2nd International Conference on Emerging Trends in Engineering and Medical Sciences (ICETEMS), Nagpur, India.

Rajan, B. Gowthama and Padmanabhan, S. and Gautam, Devendra and Khan, Feroja and Baskar, S. and Saravanan, A. Lalitha and Sharma, Abhishek (2024) An Investigation into the Design and Analysis of the Front Frame Bumper with Dynamic Load Impact. In: The 5th International Conference on Innovative Product Design and Intelligent Manufacturing Systems.

Aravinth Kumar, A and Nithish Kumar, R and Lalith Kumar, P and Balaji, A and Baskar, S. and Deepakkumar, S (2024) Design and fabrication of Emergency Braking System in four wheeler. In: Neoperspectives in Biochemical, Chemical and Microbial Techniques (ICNBCMT-2024).

Karikalan, L. and Ruban, M. and Baskar, S. and Gokul Seenu, T and Gokula Krishna, S and Dhinesh Kumar, S (2023) ANALYSIS OF POLYPROPYLENE FIBRE UNDER TENSILE TEST CONDITION. In: ICAIRST 2023.

Karikalan, L. and Baskar, S. and Theopaul Leander Fernando, P A (2023) Analysis of battery cooling system using nanofluid - A Review. In: Proceedings of International Conference on Multidisciplinary Science and Technology towards Sustainability (ICMSTS 2023) July 02, 2023.

Karikalan, L. and Baskar, S. (2023) Preparation, stability and thermophysical properties of nanofluid. In: ImmunFest - 2023.

Ruban, M. and Baskar, S. and Thebesh, S (2022) Enhancement of an environmentally friendly polymer rubber hybrid composite. In: iCAM 2022.

SivaChandran, S. and Venkatesh, R. and Baskar, S. and Arivazhagan, R. and Maridurai, T. (2022) Experimental study of shell and tube heat exchanger. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.

Baskar, S. and Vinoth Bresnav, K. and P, Sambandam (2022) Investigation on testing and analysis of polypropylene fibre under tensile. In: iCAM 2022. (In Press)

Baskar, S. and Shankara Narayanan, R and Padmanabhan, S (2022) Laser Ignition System by Using Composite Ceramics for Combustion Engine. In: iCAM 2022.

Venkatesh, R. and SivaChandran, S. and Maridurai, T. and Baskar, S. and Sivashankar, N. and Arivazhagan, R. (2022) Magnesium alloy machining and its methodology: A systematic review and analyses. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.

Ruban, M. and Baskar, S. and Balachandran, P and Deepanchakaravarthi, R (2022) PERFORMANCE ANALYSIS AND CHARACTERISTICS OF A DOMESTIC REFRIGERATION SYSTEM USING NANO-LUBRICANT ZIRCONIUM OXIDE (ZRO2) AS AN ADDITIVE. In: NCRAET’22.

Arivazhagan, R. and Baskar, S. and Venkatesh, R. and Maridurai, T. and SivaChandran, S. (2022) Performance analysis of steam generators in thermal power plant. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.

Baskar, S. and Ruban, M. and Rajesh Kumar, D and Rakesh Kumar, R (2022) REVIEW OF PHASE CHANGE MATERIALS IN HEAT TRANSFER APPLICATIONS. In: NCRAET’22.

Maridurai, T. and Arivazhagan, R. and SivaChandran, S. and Venkatesh, R. and Baskar, S. (2022) Review on direct steam generation using concentrated solar collectors. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.

Venugopal, S. and Baskar, S. and Pulipaka Neel Fordham, Samuel (2022) Study on the mechanical behaviour of Metal Matrix Composites (MMC). In: iCAM 2022.

Baskar, S. and Maridurai, T. and Arivazhagan, R. and SivaChandran, S. and Venkatesh, R. (2022) Thermal management of solar thermoelectric power generation. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.

Baskar, S. and Karikalan, L. (2020) Importance of Nanoparticles in Heat Transfer. In: iCAM 2020.

Vinod Kumar, T. and Chandrasekaran, M. and Padmanabhan, S. and Baskar, S. A NEW ARTIFICIAL IMMUNE ALGORITHM FOR SOLVING GEAR DESIGN PROBLEM. In: NCRAET’22.

Book

Punitha, A. and ANU, BAISEL and Baskar, S. and DIMPLE, JUNEJA (2025) Exploring Interdisciplinary Innovations in Science and Management, Volume I. SRR. ISBN 978-81-984006-9-7

Baskar, S. and Ramasubramanian, S. and Deepak, J.R. and Mr.CHALLA PARVATHI, RUDESH (2023) Recent Development in Multidisciplinary Science and Technological fields - Volume I - Feb 2023. SRR.