Items where Author is "Arunkumar, S."

Article

Suresh, Ganta and Vinod Kumar, T. and Muraliraja, R. and Padmapriya, A. and Rajasekar, J. and Arunkumar, S. (2026) Plant‐Derived Nanoparticles for Advanced Ni–P–TiO 2 Composite Coatings on AH36 Marine Steel. Chemistry Select, 11 (5). ISSN 2365-6549

Saravana Kumar, P and Thanigaivelan, V and Arun, K and Arunkumar, S. (2026) Influence of aluminum foam core thickness on the mechanical and thermal properties of epoxy–carbon fiber mat sandwich composites. Mechanics of Advanced Materials and Structures. ISSN 1537-6494

Dhavamanidoss, Sakthidoss and Vigneshkumar, Alagarsamy and Tarunika, Sharma and Prasath, P. and Muniyasamy, M. K. and Arunkumar, S. (2025) Environmentally Sustainable Self-compacting Geopolymer Concrete Rheological and Strength Properties Using Ground Granulated Blast Furnace Slag. Journal of Environmental Nanotechnology, 14 (3). pp. 676-684. ISSN 2279-0748

Padmanabhan, S. and Vinod Kumar, T. and Sendil Kumar, D. and Rubini, B. and Arunkumar, S. and Arul Peter, A and Vijayan, V. (2024) A Comparative Analysis of the Fuel Characteristics of Bioenergy Sources to Meet Sustainability and Environmental Goals: Sustainability and Environmental Goals. Journal of Environmental Nanotechnology, 13 (4). pp. 122-129. ISSN 2279-0748

Madhanagopal, A. and Arunkumar, S. and Jagatheesan, K. and Adinarayanan, A. (2024) Investigation on mechanical and thermal properties of clay brick additions with sugarcane bagasse ash and nanoparticles. Biomass Conversion and Biorefinery, 14 (17). pp. 21475-21483. ISSN 2190-6815

Prabhu, P. and Chokkalingam, V. and Arunkumar, S. and Perumal, Prakash and UNSPECIFIED1 and UNSPECIFIED1 (2024) The investigation on mechanical, thermal conductivity and water absorption characteristics of coir fiber-reinforced vinyl ester biocomposites. Biomass Conversion and Biorefinery. ISSN 2190-6815

Balaji, A. and Arunkumar, S. and Madhanagopal, A. and Purushothaman, R. (2023) Coir/banana hybrid composites reinforced with poly vinyl ester for mechanical, water absorption and thermal characterization. Biomass Conversion and Biorefinery. ISSN 2190-6815

Arunkumar, S. and Siva Ramakrishna, Ch. and Alphin, M.S. and Muraliraja, R. and Vinod Kumar, T. and Vishwakarma, Bhaskar and Agrawal, Vandana and Yadav, Anil Singh (2023) Optimization of stirrer speed on mechanical properties of aluminium graphite stir cast. Materials Today: Proceedings. ISSN 22147853

Arunkumar, S. and Sriraman, N. and Muraliraja, R. and Vinod Kumar, T. and Muthuraman, V. (2023) Performance evolution in machining parameter of Al-Si (LM6) alloy using neural network. Materials Today: Proceedings. ISSN 22147853

RAGAVI,, C and RAVINA DEVI, R and Arunkumar, S. and SAKTHISELVAN,, P and Ivo Romauld, S. and Rajakumari, K. and Vivek, Pazhamalai (2023) REMOVAL OF MALACHITE GREEN DYE USING ACTIVATED CARBON OBTAINED FROM Prosopis juliflora. REMOVAL OF MALACHITE GREEN DYE USING ACTIVATED CARBON OBTAINED FROM Prosopis juliflora.

Arunkumar, S. and Alphin, M.S and Edward Kennedy, Z and Sriraman, N (2022) DEVELOPMENT OF A CO-EXTRUDED Al-Ti BIMETAL COMPOSITE. Materiali in tehnologije, 56 (1). ISSN 1580-2949

Selvam, M. Amala Justus and Arunkumar, S. and Balambica, V. and Padmanabhan, S. and Vinod Kumar, T. and Shaisundaram, V S (2022) Influence of copper anodization on structural and heat transfer characteristic of aluminum piston. Materials Today: Proceedings, 59. pp. 1407-1413. ISSN 22147853

Arunkumar, S. and Dhanasekaran, C and Muthuraman, V. and Vinod Kumar, T. (2021) Modelling and stress analysis of shaft used in hydraulic streeing pump. Materials Today: Proceedings, 37. pp. 2474-2477. ISSN 22147853

Vinod Kumar, T. and Chandrasekaran, M. and Padmanabhan, S. and Saravanan, R. and Arunkumar, S. (2021) Material and design parameters optimization to enhance the life of Anti-Roll bar of commercial truck. Materials Today: Proceedings, 37. pp. 1359-1366. ISSN 22147853

Vinod Kumar, T. and Chandrasekaran, M. and Padmanabhan, S. and Saravanan, R. and Arunkumar, S. (2020) Influence of cooling design in hot press forming on product quality and productivity– An authentic story. Materials Today: Proceedings, 37. pp. 1349-1355. ISSN 22147853

Vinod Kumar, T. and Chandrasekaran, M. and Vivekanand, P.A. and Arunkumar, S. and Padmanabhan, S. (2019) Evaluating the Mechanical Properties of Snake Grass Fibre and Sisal Fibre Hybrid Composites by Injection Moulding Method. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Vinod Kumar, T. and Chandrasekaran, M. and Vivek, P. and Arunkumar, S. and Padmanabhan, S. (2019) Mechanical Characterization of Roselle and Sisal Fibre Reinforced Polymer Composites. International Journal of Vehicle Structures and Systems, 11 (2). ISSN 0975-3060

Vinod Kumar, T. and Kailasam, R and Chandrasekaran, M. and Vivek, P. and Arunkumar, S. (2019) EXPERIMENTAL INVESTIGATION OF DIESEL ENGINE USING GOBAR GAS BLENDS. International Journal of Management, Technology And Engineering, 8 (12). pp. 4542-4551. ISSN 2249-7455

Arunkumar, S. and Chandrasekaran, M. and Muthuraman, V and Vinod Kumar, T. (2018) DESIGN OF BACKGEAR MECHANISM IN LATHE. International Journal of Management, Technology And Engineering, 8 (12). pp. 4502-4514. ISSN 2249-7455

Muthuraman, V and Sridhar, R. and Palpandian, P and Arunkumar, S. (2018) Influence of Cryogenic LN2 coolant on Chip morphology in Machining 7075 Aluminium alloy. International Journal of Management, Technology And Engineering, 8 (12). pp. 4611-4615. ISSN 2249-7455

Vinod Kumar, T. and Vivekanand, P.A. and Arunkumar, S. and Arul Peter, A (2018) Investigation of CFD Based Flow Analysis of Centrifugal Pump. Investigation of CFD Based Flow Analysis of Centrifugal Pump, 8 (12). pp. 4536-4541. ISSN 2249-7455

Muthuraman, V. and Karunakaran, K and Arunkumar, S. (2018) Performance comparison of various Dry,Paraffin and conventional coolants in turning 6082 Aluminium alloy. International Journal of Management, Technology And Engineering, 8 (12). pp. 4607-4610. ISSN 2249-7455

Arunkumar, S. and Chandrasekaran, M. and Vinod Kumar, T. (2018) Analysis on Al6061-NI-graphite composite using squeeze casting method. International Journal of Engineering & Technology, 7 (2). pp. 303-310. ISSN 1793-8236

Arunkumar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Muthuraman, V (2018) Properties and behavior of squeeze pressure on aluminum molybdenum DI-supplied composite. International Journal of Engineering & Technology, 7 (2.33). pp. 496-502. ISSN 1793-8236

Arunkumar, S. and Chandrasekaran, M. and Vinod Kumar, T. (2018) Analysis on Al6061 NI gr aphite composite using squeeze casting method. International Journal of Engineering & Technology, 7 (2). pp. 303-310. ISSN 2227-5258

Arunkumar, S. and Baskaralal, V P M and Muthuraman, V. (2017) Comparative Investigation on Modal analysis of LM25 Aluminium alloy with other Aluminim alloys using Finite element analysis software. IOP Conference Series: Materials Science and Engineering, 183. 012011. ISSN 1757-8981

Muthuraman, V. and Arunkumar, S. (2017) Experimental evaluation of machining parameters in machining of 7075 aluminium alloy with cryogenic liquid nitrogen coolant. IOP Conference Series: Materials Science and Engineering, 183. 012012. ISSN 1757-8981

Arunkumar, S. and Muthuraman, V. and Baskaralal, V P M (2017) Optimization of the Machining parameter of LM6 Alminium alloy in CNC Turning using Taguchi method. IOP Conference Series: Materials Science and Engineering, 183. 012024. ISSN 1757-8981

Muthuraman, V. and Arunkumar, S. and Baskarlal, V. P. M. (2017) MODELLING AND SIMULATION ANALYSIS OF METAL CASTINGS. MODELLING AND SIMULATION ANALYSIS OF METAL CASTINGS.

Muthuraman, V and Chandrasekaran, M. and Dhansekaran, C. and Arunkumar, S. (2014) Investigation on influence of cutting forces in evaluating performance in machining of 7075 aluminium alloy with cryogenic liquid nitrogen as a coolant. International Journal of Mechanical and Production Engineering Researchh and Development, 8 (3). pp. 1322-1328. ISSN 2249-8001

Book Section

Arunkumar, S. and Sivaram, A.R and Prakash, P. and Venugopal, S (2026) Recent Advances in Mechanical Engineering for Sustainable Industrial Applications. In: Sustainable Advances in Chemical, Mechanical, and Bio-Engineering (2026). SRR.

Nalini Ramachandran, U and Surendran, R and Arunkumar, S. and Jagadeesh, P (2025) Nanotechnology in Advanced Materials and Bioenergy Systems: A Green Perspective. In: Advancing Science and Technology through Multidisciplinary Innovation toward the Future. SRR, pp. 1-231. ISBN 978-81-987134-6-9

Aravind, K. and Arunkumar, S. and Ivo Romauld, S. and Vivek, Pazhamalai (2024) Transforming Healthcare: Exploring the Next Generation of Technologies. In: Green AI-Powered Intelligent Systems for Disease Prognosis. IGI Global, pp. 21-40.

Baskar, S. and Venugopal, S and Karikalan, L. and Arunkumar, S. and Senthilkkumaran, J and Shanmugaperumal, R and Vibin, I (2024) Advanced Segregation of Defective Cigarettes: Integrating Image Processing and Machine Learning. In: Revolutionizing the Future Trends in Mechanical Engineering, Volume II, 2024. SRR. ISBN 978-81-974501-0-5

Vinod Kumar, T. and Arunkumar, S. and Chandrasekaran, M. and Muraliraja, R. and Ajith Arul Daniel, S. (2024) Modelling and Stress Analysis of Shaft used in Hydraulic Steering Pump. In: Emerging Trends in Multidisciplinary Engineering: A Comprehensive Overview,. SCIENTIFIC RESEARCH REPORTS. ISBN 978-81-96499235-9

Arunkumar, S. and Chandrasekaran, M. and Muthuraman, V. and Vinod Kumar, T. (2024) Optimization of Stirrer Speed on the Mechanical Properties of Aluminium Graphite Stir Cast Composite. In: Recent Developments in Mechanical Science and Automotive Technology. 978-81-9807923-7 ed. SCIENTIFIC RESEARCH REPORTS.

Arunkumar, S. and Muthuraman, V. and Vinod Kumar, T. and Muraliraja, R. (2024) Optimization of the Machining Parameter of Lm6 Aluminum Alloy in CNC Turning Using Neural Network. In: Emerging Technologies in Automotive and Mechanical Sciences. 978-81-9704204-1 ed. SCIENTIFIC RESEARCH REPORTS.

Arunkumar, S. and Alphin, M.S and Vinod Kumar, T. and Chandrasekaran, M. and Muraliraja, R. (2023) Study Properties and Mechanical Behavior of the Shaft Material 16MnCr5. In: RECENT DEVELOPMENT IN MULTIDISCIPLINARY SCIENCE AND TECHNOLOGICAL FIELDS VOLUME II. SRR, pp. 1-67. ISBN 978-81-962098-4-1

Vinod Kumar, T. and Muraliraja, R. and Arunkumar, S. and Ajith Arul Daniel, S. (2023) Investigation Study of Bus Body Structure Analysis. In: Emerging Technologies in Automotive and Mechanical Sciences. SCIENTIFIC RESEARCH REPORTS. ISBN 978-81-9620988-9

Vinod Kumar, T. and Arunkumar, S. and Ajith Arul Daniel, S. and Vijayananth, Suyamburajan and Padmanabhan, P (2022) Ethanol Future Fuel for India: An Introduction. In: Techniques and Innovation in Engineering Research Vol. 3. B P International, pp. 1-11. ISBN 978-93-5547-913-6

Padmanabhan, S. and Vinod Kumar, T. and Arunkumar, S. and Ajith Arul Daniel, S. and Vijayananth, Suyamburajan (2021) Promising Recovery Directions for Waste Plastic as an Energy Source: A Brief Overview. In: Current Advances in Geography, Environment and Earth Science. B P International, pp. 1-9. ISBN 978-93-5547-094-2

Sathish, K and Arunkumar, S. and Baskar, S. and Ramasubramanian, S and Sridhar, R. and UNSPECIFIED1 Influence of Vegetable Oil Fueling on Efficiency and Exhaust Emissions of a Compression Ignition Engine — A Review. In: Frontiers in Integrated Science and Technological Innovation. SRR, pp. 1-111. ISBN 978-81-685538-0-4

Arunkumar, S. and Malathi, Ragunathan and Ranjith, P and Cyril Prasanna, Ra and Saranraj, I and Kowsalya, L Neurodegenerative Disorder Prognostics via Machine Learning: Predictive Modelling for Parkinson's Disease. In: Advanced Pathways in Electrical, Communication, and Automation. 1 ed. Taylor & Francis Group. ISBN 978-1-041-30297-1

Conference or Workshop Item

Ramasubramanian, S. and Arunkumar, S. and Baskar, S. and Sathish, K and Sridhar, R. (2026) INFLUENCE OF VEGETABLE OIL FUELING ON EFFICIENCY AND EXHAUST EMISSIONS OF A COMPRESSION IGNITION ENGINE — A REVIEW. In: International Conference on Scientific Research and Revolution ICSRR 2026, March 21-22, 2026.

Rajendraprasath, G and Muthuraman, V. and Sridhar, R. and Arunkumar, S. (2025) Performance Evaluation of Cryogenic LN2 Coolant on Surface finish and Chip morphology in Machining 7075 Aluminium alloy. In: International Conference on Recent Trends in Mechanical Engineering (ICRTME -2025), Sep 24 & 25 -2025, VISTAS CHENNAI.

Gopal, V and Arunkumar, S. and Alphin, M.S and Bharanidaran, R and Venkatesh, A (2025) Casting and Analysis of Aluminium-Silicon Alloy with Copper. In: International Conference on Recent Trends in Mechanical Engineering (ICRTME -2025), 24th and 25th September 2025, Department of Mechanical Engineering School of Engineering VISTAS in collaboration with INTI International University, Malaysia.

John Milken, A and Jojo Gangan, I and RAJESH KANNAN, R. and Ashif Shaikh, L and Arunkumar, S. (2025) Design and Development Model of Spiral Bevel Gear with Minimized Weight. In: International Conference on Recent Trends in Mechanical Engineering (ICRTME -2025), SEP 24 &25 2025, VISTAS CHENNAI.

Arunkumar, S. and Alphin, M.S and Edward Kennedy and Sriraman, N and Sridhar, R and UNSPECIFIED1 (2025) Microstructural Evolution in the Co-Extruded Aluminium-Titanium Bi-Metal Composite. In: UNSPECIFIED1.

Madhavan, T and Arunkumar, S. and Sridhar, R. and Pugazhenthi, P and Muthuraman, V. (2025) The Mechanical Aluminium Graphite Stir Cast Composite's Ability to Improve Stirrer Speed. In: International Conference on Recent Trends in Mechanical Engineering (ICRTME -2025), SEP 24 AND 2025, CHENNAI.

Nalini Ramachandran, U and Surendran, R and Arunkumar, S. and Jagadeesh, P (2025) NANOTECHNOLOGY IN ADVANCED MATERIALS AND BIOFUEL SYSTEMS: A SUSTAINABLE APPROACH. In: International Conference on Scientific Research and Revolution ICSRR 2025,, Auguest 17 2025, Virtual Mode.

Muthamizh chezhiyan., MPV and Arunkumar, S. (2024) Investigation of The Properties of Tig Welded Dissimilar Alloys of Inconel X750 and Inconel 718 Utilizing MOORA Techniques. In: National Conference on Recent Trends in Mechanical Engineering (NCRTME -2024), APRIL 24 th 2024, VISTAS CHENNAI.

Arunkumar, S. and Alphin, M.S and Edward Kennedy, Z and Muthuraman, V. (2024) PROPERTIES AND BEHAVIOUR OF STEEL SLAG REINFORCED AL-SI METAL MATRIX COMPOSITE PREPARED USING STIR CASTING. In: ICAAMME'24 3rd International Conference on "Advances in Automobile, Manufacturing, and Mechanical Engineering", APRIL 5 TH 2024, EASWARI ENGINEERING COLLEGE(AUTONOMOUS) CHENNAI.

P, Tamilselvi and Lathika, V. and Jayachitra, S. and Arunkumar, S. and Balasubramani, M. and Kalaichelvi, V (2024) Secure Multi-Party Computation for Collaborative Data Analysis in Network Security. In: 2024 International Conference on Intelligent and Innovative Technologies in Computing, Electrical and Electronics (IITCEE), Bangalore, India.

Vinod Kumar, T. and Ajith Arul Daniel, S and Karunakaran, K. and Arunkumar, S. and Muthuraman, V. (2023) NANO COATING: ADVANCED PROTECTIVE AND FUNCTIONAL SURFACE TECHNOLOGY. In: 2nd International Conference on Multidisciplinary Science and Technology towards Sustainability, March 23 2025, Virtual mode.

Arunkumar, S. and Sriraman, N and Muraliraja, R. and Vinod Kumar, T. and Muthuraman, V. (2022) Performance evolution in machining parameter of Al-Ai(LM6) alloy using neural network. In: Second International Conference on Advancements in Materials Science and Technology (iCAM 2022), November 02 – 04, 2022, Satyabhama Institute of Science and Technology, Chennai – 600119, India..

Patent

The Registrar (2026) ANALYTICAL APPARATUS FOR CHEMICAL CHARACTERIZATION AND STRUCTURAL IDENTIFICATION OF DRUGS. 202641019943 A.

Vels Institute of Science, Technology & Advanced Studies (VISTAS) (2025) A SYSTEM AND METHOD FOR A SMART TORQUE WRENCH WITH DIGITAL CALIBRATION INTERFACE. .