Items where Author is "Ajith Arul Daniel, S."

Vellaichamy, Ramesh and Pugazhenthi, R. and Ajith Arul Daniel, S. and Selvarani, A. Geetha (2025) Optimizing turning parameters of duralumin nano Cr₂C₃–MoS₂ using ANN and MOORA: A multi-objective approach. Results in Engineering, 27. p. 105978. ISSN 25901230

Ajith Arul Daniel, S. and Sridhar, R. and Arun Kumar, A and Baskar, S. and Aravind, Y and Venkatesh, J (2025) Development of a Low-Cost Rehabilitation Device for Stroke Patients: ROBO REHEB (MOBAID). In: Advancing Science and Technology through Multidisciplinary Innovation toward the Future. SRR. ISBN 978-81-987134-6-9

Mohankumar, K. and Pugazhenthi, R. and Ajith Arul Daniel, S. and Sreeram, D. and Vamsi Krishna, Mamidi and Pavan Kishore, M. L. (2025) Metallurgical Bonding, Interfacial Chemistry, and Mechanical Optimization of Dissimilar AA7079–AA6063 Welds via Response Surface Methodology. MALAYSIAN JOURNAL OF CHEMISTRY, 27 (3). ISSN 15112292

Parthiban, A. and Ananthakumar, K. and Ajith Arul Daniel, S. and Sivaganesan, S. and Sathish, T. and Giri, Jayant and Santhosh, A. Johnson and Hourani, Ahmad O. (2025) Comparative Study on EDM Wire Cutting and CO 2 Laser Cutting for High‐Precision Stainless Steel Sheet Processing. Engineering Reports, 7 (5). ISSN 2577-8196

Vinod Kumar, T. and Muraliraja, R. and Ajith Arul Daniel, S. and Gnanavel, C. and Muthuraman, V. (2025) Applications of Nano-Coating in Mechanical Systems: Improving Wear, Corrosion, and Performance. In: Emerging Trends in Multidisciplinary Engineering: A Comprehensive Overview,. SCIENTIFIC RESEARCH REPORTS. ISBN 978-81-9840066-6

Sivabalan, S. and Sridhar, R. and Ajith Arul Daniel, S. and Sathishkumar, G. (2024) Study of mechanical behaviour & microstructural properties on friction stir welded aluminium alloys 6082 - t6&8011. E3S Web of Conferences, 509. 03012. ISSN 2267-1242

Muthukumaran, R. and Ajith Arul Daniel, S. and Nithya, M. and Parthiban, A. and Sathish, T. and Giri, Jayant and Al-Lohedan, Hamad A. (2024) Characterization on properties of Al7050/TiC/BN hybrid metal matrix composite. AIP Advances, 14 (4). ISSN 2158-3226

Hemadri, Kadapa and Ajith Arul Daniel, S. and Kukanur, Vijayendra and Nagaral, Madeva (2024) Determination of wear rate and coefficient of friction of Al6262 reinforced with different weight percentage of WC/MoS2 under dry sliding condition. Research on Engineering Structures and Materials. ISSN 21489807

Vinod Kumar, T. and Arunkumar, S. and Chandrasekaran, M. and Muraliraja, R. and Ajith Arul Daniel, S. (2024) Modelling and Stress Analysis of Shaft used in Hydraulic Steering Pump. In: Emerging Trends in Multidisciplinary Engineering: A Comprehensive Overview,. SCIENTIFIC RESEARCH REPORTS. ISBN 978-81-96499235-9

Prajulraj, P. and Sridhar, R. and Pugazhenhi, R. and Ajith Arul Daniel, S. (2023) Study the End Milling Machinability Properties of Al 6061/WC Aluminium Metal Matrix Composites. Key Engineering Materials, 971. pp. 23-32. ISSN 1662-9795

Saravanan, R. and Gnanavel, C. and Ajith Arul Daniel, S. and Rajesh, S. and Kamatchi, T. and Anbuchezhiyan, G. and Sreekanth, S. (2023) Analysis of mechanical properties enhancement on composites of AA7175 by multi walled carbon nano tube (MWCNT). Materials Today: Proceedings. ISSN 22147853

Kumar, Patnala Padma and Ruban, M. and Ajith Arul Daniel, S. and Pugazhenthi, R. and Santhosh, K. (2023) Influence of Control Parameters during Drilling of Aluminum Reinforced with HNT Hybrid Matrix Composites. Advances in Materials Science and Engineering, 2023. pp. 1-10. ISSN 1687-8434

Vinod Kumar, T. and Muraliraja, R. and Arunkumar, S. and Ajith Arul Daniel, S. (2023) Investigation Study of Bus Body Structure Analysis. In: Emerging Technologies in Automotive and Mechanical Sciences. SCIENTIFIC RESEARCH REPORTS. ISBN 978-81-9620988-9

Scaria, Clement Tom and Pugazhenthi, R. and Ajith Arul Daniel, S. and Santhosh, K. (2022) Mechanical and Wear Studies on AA7075/Nano TiC/Graphite Hybrid Composites for Tribological Applications. Advances in Materials Science and Engineering, 2022. pp. 1-8. ISSN 1687-8434

Ramasamy, Muthukumaran and Ajith Arul Daniel, S. and Nithya, M. (2022) Application of Natural Fiber-reinforced Composites in Additive Manufacturing. In: Functional Composite Materials: Manufacturing Technology and Experimental Application. BENTHAM SCIENCE PUBLISHERS, pp. 123-137. ISBN C. Samson Jerold Samuel M. Suresh S. Gnanasekaran Functional Composite Materials: Manufacturing Technology and Experimental Application 04 18 2022 9789815039894 BENTHAM SCIENCE PUBLISHERS 10.2174/97898150398941220101 https://www.eurekaselect.

Kumar, R. and Sivaganesan, S. and Senthamaraikannan, P. and Saravanakumar, S. S. and Khan, Anish and Ajith Arul Daniel, S. and Loganathan, L. (2022) Characterization of New Cellulosic Fiber from the Bark of Acacia nilotica L . Plant. Journal of Natural Fibers, 19 (1). pp. 199-208. ISSN 1544-0478

Rajesh, S. and Saravanan, R. and Kamatchi, T. and Gnanavel, C. and Ajith Arul Daniel, S. and Nagarathi, D.K. (2022) Evaluation on hardness and percentage of elongation discrepancy by Zinc oxide nanoparticles on AA6070 alloy composites. Materials Today: Proceedings, 62. pp. 1921-1924. ISSN 22147853

Ramasamy, Muthukumaran and Ajith Arul Daniel, S. and Nithya, M. (2022) Investigation on Surface Roughness of Aluminium (Al7050/TiC/BN) Composite Through Wire Electric Discharge Machining. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 933-941.

Hemadri, Kadapa and Ajith Arul Daniel, S. and Kukanur, Vijayendra and Vijayananth, S and Kumar, R (2022) Investigation on mechanical characterization of Al/Mos2/WC hybrid composite. Materials Today: Proceedings, 69. pp. 995-999. ISSN 22147853

Hemadri, Kadapa and Ajith Arul Daniel, S. and Parthiban, A. and Vinod Kumar, T. (2022) Investigation on the response parameters in electric discharge machining of developed aluminium metal matrix composites. Materials Today: Proceedings, 68. pp. 1214-1218. ISSN 22147853

Kukanur, Vijayendra and Ajith Arul Daniel, S. and Sivaganesan, S. and Algur, Veerabhadrappa and Chandrasekaran, M. (2022) Mechanical properties of silicon nitride fortified aluminium based metal matrix composites – A review. Materials Today: Proceedings, 68. pp. 1733-1736. ISSN 22147853

Saravanan, R. and Gnanavel, C. and Rajesh, S. and Kamatchi, T. and Ajith Arul Daniel, S. and Nagarathi, D.K. and UNSPECIFIED1 and UNSPECIFIED1 (2022) Synthesis of Zinc oxide and CNT in AA7178 aluminium alloy composite impression on characteristics. Materials Today: Proceedings, 62. pp. 1973-1976. ISSN 22147853

Ramasamy, Muthukumaran and Ajith Arul Daniel, S. and M., Nithya (2021) A review on aluminium (Al7050) metal matrix composite characteristics reinforced with titanium. Materials Today: Proceedings, 43. pp. 1720-1723. ISSN 22147853

Ramasamy, Muthukumaran and Ajith Arul Daniel, S. and Nithya, M. and Sathees Kumar, S. and Pugazhenthi, R. (2021) Characterization of natural – Synthetic fiber reinforced epoxy based composite – Hybridization of kenaf fiber and kevlar fiber. Materials Today: Proceedings, 37. pp. 1699-1705. ISSN 22147853

Vijay Ananth, S.S. and Udayakumar, A. Ramesh and Ajith Arul Daniel, S. and Poornachandiran, N. (2021) Optimization of machining parameters of Kevlar fibre reinforced composites. Optimization of Machining Parameters of Kevlar Fibre Reinforced Composites. 020117.

Ajith Arul Daniel, S. and Velu, P. Shenbaga and Kumar, R. and Ananth, S. Vijay (2021) Numerical analysis of single cylinder engine crankshaft. In: PROCEEDINGS OF INTERNATIONAL CONFERENCE ON RECENT TRENDS IN MECHANICAL AND MATERIALS ENGINEERING: ICRTMME 2019, 12–13 December 2019, Chennai, India.

Sudhagar, S. and Sakthivel, M. and Ajith Arul Daniel, S. (2021) Application of image processing to radiographic image for quantitative assessment of friction stir welding quality of aluminium 2024 alloy. Measurement, 152. p. 107294. ISSN 02632241

Ramasamy, Muthukumaran and Ajith Arul Daniel, S. and D., Upendar Chary and Nithya, M. (2021) Aluminium (Al7050) metal matrix composites: A review of reinforcement and mechanical characteristics. Aluminium (Al7050) metal matrix composites: A review of reinforcement and mechanical characteristics. 020003. ISSN 978-0-7354-4114-9

Ajith Arul Daniel, S. and Parthiban, A. and Sivaganesan, S. and Vijay Ananth, S. (2021) Investigation on Surface Roughness in Drilling of al/SiC/MoS2 Metal Matrix Composites. In: Lecture Notes in Mechanical Engineering. springer, pp. 717-724.

Ramasamy, Muthukumaran and Ajith Arul Daniel, S. and Nithya, M. (2021) Investigation on surface roughness of aluminium (Al7050/TiC/BN) hybrid metal matrix. Materials Today: Proceedings, 46. pp. 852-856. ISSN 22147853

Sebastian, Sanoop and Suyamburajan, Vijayananth and R, Kumar and Ajith Arul Daniel, S. (2021) Synthesis, processing and finite element analysis of CNT based polymer composites. In: RECENT TRENDS IN MANUFACTURING TECHNOLOGIES, MATERIALS PROCESSING, AND TESTING, 18–19 February 2021, Chennai, India.

Ajith Arul Daniel, S. and Kumar, R. and Vijayananth, S. and Pugazhenthi, R. and UNSPECIFIED1 (2020) Multi-objective optimization of drilling of Al5059-SiC-2%MoS2 composites using NSGA-II. Materials Today: Proceedings, 22. pp. 853-857. ISSN 22147853

Ajith Arul Daniel, S. and Ananth, S. Vijay and Parthiban, A. and Sivaganesan, S. (2020) Optimization of machining parameters in electro chemical machining of Al5059/SiC/MoS2 composites using taguchi method. Materials Today: Proceedings, 21. pp. 738-743. ISSN 22147853

Jayaseelan, V. and Vijayananth, S. and Francis Xavier, J. and Ajith Arul Daniel, S. and Manoj Kumar, Nallapaneni and Jiang, X.X. (2019) Experimental investigation on bi-axial superplastic forming characteristics of AA6063/SiCp with various percentages of SiCp under various temperatures and pressures. Results in Physics, 15. p. 102624. ISSN 22113797

D., Vivekanandan and M., Sakthivel and S., Srinivasa Moorthy and Ajith Arul Daniel, S. (2019) Fabrication and characterization of TiO 2 particulate filled agave Americana fiber-reinforced polyester resin composites. Pigment & Resin Technology, 48 (6). pp. 533-539. ISSN 0369-9420

Suyamburajan, Vijayananth and V, Jayaseelan and Ajith Arul Daniel, S. and Kumar, Nallapaneni Manoj (2019) High temperature superplasticity and its deformation mechanism of AA6063/SiC. Case Studies in Thermal Engineering, 14. p. 100479. ISSN 2214157X

Ajith Arul Daniel, S. and Pugazhenthi, R. and Kumar, R. and Vijayananth, S. (2019) Multi objective prediction and optimization of control parameters in the milling of aluminium hybrid metal matrix composites using ANN and Taguchi -grey relational analysis. Defence Technology, 15 (4). pp. 545-556. ISSN 22149147

Vijayananth, S. and Ajith Arul Daniel, S. and Muthuraman, R K and Pugazhenthi, R. (2018) ANALYSIS OF MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS IN WEDM OF AL/SIC/MOS2. In: International Journal of Mechanical Engineering and Technology (IJMET). IJMET.

Ajith Arul Daniel, S. and Vijayananth, S. and Pugazhenthi, R. and Muthuraman, R.K. (2018) IMPACT ANALYSIS OF INSAS RIFLE BULLET AGAINST THE VEHICLE ALUMINIUM COMPOSITE ARMOUR PLATE USING LS-DYNA. International Journal of Mechanical Engineering and Technology (IJMET), 9 (11).