Items where Author is "Sridhar, R."

Article

Sathishkumar, G. and Prashanth, K. S. and Khatoon, Umme Thahira and Selvarani, A. Geetha and Sridhar, R. and Sivabalan, S. and Kalyana Chakravarthy, P. R. and Vijayan, V. and Baskar, S. (2024) Investigation of mechanical properties, viscoelastic properties and free vibration analysis of natural fibre reinforced composite materials. Interactions, 245 (1). ISSN 3005-0731

Pugazhenthi, R. and Sridhar, R. and Gnanavel, C. and Subithalini, K. (2024) Comparison of mechanical stability and morphology study between tree fibres and shrub fibres reinforced epoxy bio-composites. Materials Today: Proceedings, 108. pp. 304-310. ISSN 2214-7853

Sivabalan, S. and Sridhar, R. and Ajith Arul Daniel, S. and Sathishkumar, G. (2024) Study of mechanical behaviour & microstructural properties on friction stir welded aluminium alloys 6082 - t6&8011. E3S Web of Conferences, 509. 03012. ISSN 2267-1242

Mohanraj, P. and Sridhar, R. and Gopalakrishnan, T. and Manikandan, R. and Bhowmik, Abhijit and UNSPECIFIED1 (2024) Transient Characteristics and Performance of a Dual Compensation Chamber Loop Heat Pipe under Various Heat Loads. Journal of Engineering, 2024 (1). ISSN 2314-4904

Prajulraj, P. and Sridhar, R. and Pugazhenhi, R. and Ajith Arul Daniel, S. (2023) Study the End Milling Machinability Properties of Al 6061/WC Aluminium Metal Matrix Composites. Key Engineering Materials, 971. pp. 23-32. ISSN 1662-9795

Prajul Raj, P. and Sridhar, R. and Pugazhenthi, R. and Anbuchezhiyan, G. and Ganesh, M. (2023) Investigating the mechanical properties of tungsten carbide metal matrix composites with Al 6061. Materials Today: Proceedings. ISSN 22147853

Sathishkumar, G. and Sridhar, R. and Sivabalan, S. and Pugazhenthi, R. (2022) Dynamic analysis of the natural fiber (Coir) reinforce polyester composite material with mechanical properties. Materials Today: Proceedings, 69. pp. 1292-1299. ISSN 22147853

Sathishkumar, G. and Sridhar, R. and Gokul, T. and Pugazhenthi, R. (2022) Study and compare the mechanical properties of bio fiber reinforced composites. Materials Today: Proceedings, 68. pp. 1429-1436. ISSN 22147853

Sivabalan, S. and Sridhar, R. and Sathishkumar, G. (2022) Study on mechanical behaviour of friction stir welded 6082-T6 aluminium alloys. Materials Today: Proceedings, 69. pp. 944-949. ISSN 22147853

Sridhar, R. and Shaisundaram, V.S. and Baskar, S. and Ramasubramanian, S. and Sathiskumar, G. and Sivabalan, S. (2021) Investigation of grape seed oil biodiesel with cerium oxide nanoparticle in CI engine. Materials Today: Proceedings, 37. pp. 1399-1402. ISSN 22147853

Sivabalan, S. and Sridhar, R. and Parthiban, A. and Sathiskumar, G. (2021) Experimental investigations of mechanical behavior of friction stir welding on aluminium alloy 6063. Materials Today: Proceedings, 37. pp. 1678-1684. ISSN 22147853

Ajith, Arul Daniel S. and Dhanasekeran, C. and Sivaganesan, S. and Sridhar, R. (2021) Investigation on the Mechanical Properties of Silicon Carbide Particulates in Al/SiC/MoS₂. Materials Science Forum, 979. pp. 89-94. ISSN 1662-9752

Prajulraj, P. and Sridhar, R. (2021) Experimental investigation on mechanical and morphological properties of AA 6061 reinforced with silicon carbide. Materials Today: Proceedings, 37. pp. 2041-2047. ISSN 22147853

Sathishkumar, G. and Sridhar, R. and Sivabalan, S. and Joseph Irudaya Raja, S. (2019) Damping Factor and Dynamic Mechanical Analysis of Glass Fibre Reinforced Polyester Composite. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Sujatha, K. and Karthikeyan, V. and Balaji, V. and Bhavani, N.P.G. and Srividhya, V. and Krishnakumar, R. and Sridhar, R. (2019) Hybrid Electric Vehicle Emissions Monitoring and Estimation using Artificial Neural Networks: Technical Note. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Sivabalan, S. and Sridhar, R. and Sathishkumar, G. and Prakash, M. (2019) Mechanical Behaviour of Friction Stir Welded Dissimilar Aluminium Alloy AA 6082 and AA 2014. International Journal of Vehicle Structures and Systems, 11 (3). ISSN 0975-3060

Karikalan, L. and Chandrasekaran, M. and Vinod Kumar, T. and Sridhar, R. (2019) Behaviour of CI engine performance, combustion and exhaust emission with neem biodiesel at varied fuel injection rates. International Journal of Ambient Energy, 40 (7). pp. 749-753. ISSN 0143-0750

Ferdaus, F. and Sridhar, R. and Sathishkumar, G. and Sivabalan, S. (2019) Computational Analysis of Straight Nozzle: Technical Note. International Journal of Vehicle Structures and Systems, 11 (2). ISSN 0975-3060

Muthuraman, V and Sridhar, R. and Palpandian, P and Arunkumar, S. (2018) Influence of Cryogenic LN2 coolant on Chip morphology in Machining 7075 Aluminium alloy. International Journal of Management, Technology And Engineering, 8 (12). pp. 4611-4615. ISSN 2249-7455

Sridhar, R. and Jeevahan, Jeya and Chandrasekaran, M. (2018) Effect of the addition of 1-pentanol on engine performance and emission characteristics of diesel and biodiesel fuelled single cylinder diesel engine. International Journal of Ambient Energy, 41 (1). pp. 58-63. ISSN 0143-0750

Jacob, S and Sridhar, R. and Joseph Irudaya Raja, S. (2017) Estimation of fracture parameters for Al-SiC and Al-Fe 2 O 3 metal matrix composites. IOP Conference Series: Materials Science and Engineering, 183. 012007. ISSN 1757-8981

Joseph Irudaya Raja, S. and Vinod Kumar, T. and Sridhar, R. and Vivek, P (2017) Experimental Investigation of Thermal Properties in Glass Fiber Reinforced with Aluminium. IOP Conference Series: Materials Science and Engineering, 183. 012005. ISSN 1757-8981

Sridhar, R. and Chandrasekaran, M. and Sriramya, C and Page, Tom (2017) Optimization of heterogeneous Bin packing using adaptive genetic algorithm. IOP Conference Series: Materials Science and Engineering, 183. 012026. ISSN 1757-8981

Sridhar, R. and Chandrasekaran, R M and Sriramya, P. (2017) A review on application of 1D, 2D and 3D bin packing Techniquies. A review on application of 1D, 2D and 3D bin packing Techniquies.

Book Section

Sasikala, K. and Ganeshkumar, S and Sridhar, R. and Baskar, S. and Prakash, P. (2026) Electric Vehicles: Driving the Transition to Sustainable and Low-Carbon Transportation Systems. In: Sustainable Advances in Chemical, Mechanical, and Bio-Engineering (2026). SRR. ISBN 978-81-996683-8-6

Shaisundaram, V S and Sridhar, R. and Muraliraja, R. and Vinod Kumar, T. and Sathish, C. (2025) A Comprehensive Review of Nano additives Applications for Enhancing Palm Biodiesel Performance in Internal Combustion Engine. In: Advancing Technology with Multidisciplinary Innovation for Sustainable Growth. SCIENTIFIC RESEARCH REPORTS, CHENNAI, pp. 63-71. ISBN 978-81-987134-9-0

Shaisundaram, V S and Sridhar, R. and Muraliraja, R. and Vinod Kumar, T. (2025) A COMPREHENSIVE REVIEW OF NANO ADDITIVES APPLICATIONS FOR ENHANCING PALM BIODIESEL PERFORMANCE IN INTERNAL COMBUSTION ENGINE. In: International Conference on Scientific Research and Revolution. SCIENTIFIC RESEARCH REPORTS, CHENNAI, p. 85. ISBN 978-93-7361-744-2

Ajith Arul Daniel, S. and Sridhar, R. and Arun Kumar, A and Baskar, S. and Aravind, Y and Venkatesh, J (2025) Development of a Low-Cost Rehabilitation Device for Stroke Patients: ROBO REHEB (MOBAID). In: Advancing Science and Technology through Multidisciplinary Innovation toward the Future. SRR. ISBN 978-81-987134-6-9

Ajith Arul Daniel, S and Sridhar, R. and Arun Kumar, A and Baskar, S. and Aravind, Y and Venkatesh, D (2025) Development of a Low-Cost Rehabilitation Device for Stroke Patients: ROBO REHEB (MOBAID). In: Advancing Science and Technology through Multidisciplinary Innovation toward the Future. SRR, p. 150. ISBN 978-81-987134-6-9

Dinesh, C M and Chandrasekaran, M. and Baskar, S. and Sridhar, R. and Ruban, M. and Arun Vikram, M P (2025) Lightweight Magnesium Alloy Composites for Enhanced Automobile Performance and Fuel Efficiency. In: Advancing Science and Technology through Multidisciplinary Innovation toward the Future. SRR.

Ruban, M. and Sridhar, R. and Karikalan, L. and Baskar, S. and Vijayaraj, S. and Soundarya, M.K. (2025) Molten Salt Breakthrough Harnessing Energy with Thorium. In: Molten Salt Breakthrough Harnessing Energy with Thorium. Amazon Publications.

Sathish Kumar, G. and Sridhar, R. and Gnanavel, C. (2024) ADVANCED APPLICATIONS AND PROPERTIES OF HYDROCERAMICS. In: Smart Materials and Structures in mechanical Engineering. Imaginex Inks Publication, pp. 110-120. ISBN 978-81-970654-4-6]

Sasikala, K. and Sridhar, R. and Somanathan, T. and Jagadeesh, P and Baskar, S. (2024) The Role of Electrical Engineering in Renewable and Smart Energy Systems. In: Emerging Trends in Multidisciplinary Engineering: A Comprehensive Overview. SRR.

Sivabalan, S. and Sridhar, R. and Pugazhenthi, R. and Eriki Ananda, Kumar and Sathishkumar, G. (2022) Bird Impact Analysis of a Typical Transport Aircraft Wing. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 507-521.

Book

Ruban, M. and Vijayaraj, S. and Soundarya, M K and Sridhar, R. and Baskar, S. and Karunakaran, K. and Gopalakrishnan, T. and Ajith Arul Daniel, S. and Gnanavel, C. and Muthuraman, V. (2026) Industry 4.0 and the Rise of Artificial Intelligence in Production: Artificial Intelligence in Production. Amazon Kindle.

Ruban, M and Vijayaraj, S. and Soundarya, M. K. and Sridhar, R. and Karunakaran, K. and Ajith Arul Daniel, S. and Baskar, S. (2022) AI Agents in Modern Manufacturing Systems. Amazon Corporate. ISBN 978-93-343-8460-4