Items where Author is "Pugazhenthi, R."

Article

Vellaichamy, Ramesh and Pugazhenthi, R. and Ajith Arul Daniel, S. and Selvarani, A. Geetha (2025) Optimizing turning parameters of duralumin nano Cr₂C₃–MoS₂ using ANN and MOORA: A multi-objective approach. Results in Engineering, 27. p. 105978. ISSN 25901230

Silambarasan, P. and Pugazhenthi, R. and Vijayananth, S. and Anbarasu, A. and Vijayaraj, S. and Paled, Maheshwari and Sureshkumar, Myilsamy and Bhuvanesh, N. (2025) Chemometric Optimization of Superplastic Forming Parameters in SiC-Reinforced Aluminium Matrix Composites via Response Surface Methodology. MALAYSIAN JOURNAL OF CHEMISTRY, 27 (3). ISSN 15112292

Mohankumar, K. and Pugazhenthi, R. and Ajith Arul Daniel, S. and Sreeram, D. and Vamsi Krishna, Mamidi and Pavan Kishore, M. L. (2025) Metallurgical Bonding, Interfacial Chemistry, and Mechanical Optimization of Dissimilar AA7079–AA6063 Welds via Response Surface Methodology. MALAYSIAN JOURNAL OF CHEMISTRY, 27 (3). ISSN 15112292

Nikhil, K. V. and Ramasubramanian, S. and Gudimetla, Avinash and Amarnath, Gunti and Sathishkumar, G. and Pugazhenthi, R. and Dikshit, Mithilesh K. and Pathak, Vimal Kumar (2025) Experimental investigation on vibration characteristics and damping factor of coir fiber reinforced polyester composite material. Discover Applied Sciences, 7 (5). ISSN 3004-9261

Vinothkumar, M. and Kirubadurai, B. and Jaganraj, R. and Jegadeeswari, G. and Pugazhenthi, R. and Manikandan, G. (2025) Sustainable composite materials for UAVs: An analysis of Morinda citrifolia and Tamarindus indica bio-fibres. International Review of Applied Sciences and Engineering. ISSN 2062-0810

Gopalakrishnan, T. and R, Udhayakumar and Pugazhenthi, R. and R, Manikandan and Kanan, Mohammad and Tank, Gaurang and Simon, Deepa (2025) Effects of thermal shock on mechanical properties and microstructural integrity of aluminum–SiC composites. AIP Advances, 15 (11). ISSN 2158-3226

Rahman, M. Adeelur and Kumar, S.D. and Pugazhenthi, R. (2024) Design Optimization and Experimental Investigation on Friction Stir Welded Aluminium Alloys and its Mechanical Characteristics. International Journal of Vehicle Structures and Systems, 16 (6). ISSN 0975-3060

Mohankumar, K and Pugazhenthi, R. and Khan, Naushad Hasin and Srinivas, Gollapalli Veera Satya and Parthiban, A. and Karthick, M. and Alotaibi, Majed A. and Majumder, Himadri and UNSPECIFIED1 (2024) Experimental investigation of the friction stir welding process of AA5059 and AA7079 and prediction using fuzzy approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN 0954-4062

Selvam, R. and Vignesh, M. and Pugazhenthi, R. and Anbuchezhiyan, G. and Satyanarayana Gupta, M. (2024) Effect of process parameter on wire cut EDM using RSM method. International Journal on Interactive Design and Manufacturing (IJIDeM), 18 (5). pp. 2957-2968. ISSN 1955-2513

Pavan Kishore, M. L. and Madhavi, B. and Pati, Pravat Ranjan and Pugazhenthi, R. and Giri, Jayant and Sathish, T. and Parthiban, A. (2024) Free vibration analysis of composite aircraft wing. Interactions, 245 (1). ISSN 3005-0731

Pugazhenthi, R. and Sridhar, R. and Gnanavel, C. and Subithalini, K. (2024) Comparison of mechanical stability and morphology study between tree fibres and shrub fibres reinforced epoxy bio-composites. Materials Today: Proceedings, 108. pp. 304-310. ISSN 2214-7853

Kumar, S.D. and Pugazhenthi, R. (2023) Achievement of Optimum Characteristics of Friction Stir Welded Joints with Varied Process Parameters. International Journal of Vehicle Structures and Systems, 15 (5). ISSN 0975-3060

Durgalakshmi, S and Ilango, T. and Pugazhenthi, R. and Singh, Ajay Partap and Baskar, S. and Padmanabhan, S. and Vijayan, V. (2023) Study on The Application of Processed Municipal Solid Waste Ash for Sustainable Construction Materials. E3S Web of Conferences, 399. 03017. ISSN 2267-1242

Rajesh, G. and Thiyagaraj, J. and Jagath Narayana, K. and Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Satyanarayana Gupta, M. (2023) Microstructure and mechanical properties of AZ91D/Si3N4 composites using squeeze casting method. Materials Today: Proceedings. ISSN 22147853

Karthick, M. and Siva Ramakrishna, Ch. and Pugazhenthi, R. and Gudadhe, Nitin and Baskar, S. and Renu, F and Kumar, Rajan (2023) Contact stress analysis of xylon coated spur gear using ANSYS workbench. Materials Today: Proceedings. ISSN 22147853

Prajul Raj, P. and Sridhar, R. and Pugazhenthi, R. and Anbuchezhiyan, G. and Ganesh, M. (2023) Investigating the mechanical properties of tungsten carbide metal matrix composites with Al 6061. Materials Today: Proceedings. ISSN 22147853

Kumar, Patnala Padma and Ruban, M. and Ajith Arul Daniel, S. and Pugazhenthi, R. and Santhosh, K. (2023) Influence of Control Parameters during Drilling of Aluminum Reinforced with HNT Hybrid Matrix Composites. Advances in Materials Science and Engineering, 2023. pp. 1-10. ISSN 1687-8434

Mohan, E. and Anbuchezhiyan, G. and Pugazhenthi, R. and Prakash, F. Peter (2023) Wear Behavior of Brass Based Composite Reinforced with SiC and Produced by Stir Casting Process. Materials Research, 26. ISSN 1516-1439

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Palani, Kumaran and Mamidi, Vamsi Krishna (2022) Influence of Coated Electrode in Nanopowder Mixed EDM of Al–Zn–Mg–Si3N4 Composite. Advances in Materials Science and Engineering, 2022. pp. 1-11. ISSN 1687-8434

Scaria, Clement Tom and Pugazhenthi, R. and Ajith Arul Daniel, S. and Santhosh, K. (2022) Mechanical and Wear Studies on AA7075/Nano TiC/Graphite Hybrid Composites for Tribological Applications. Advances in Materials Science and Engineering, 2022. pp. 1-8. ISSN 1687-8434

Pugazhenthi, R. and Anbuchezhiyan, G. and Muthuraman, R.K. and Vignesh, M. and Ponshanmugakumar, A. (2022) Optimization of fatigue life and fractography analysis of knuckle joint. Materials Today: Proceedings, 46. pp. 4344-4348. ISSN 22147853

Sathishkumar, G. and Sridhar, R. and Sivabalan, S. and Pugazhenthi, R. (2022) Dynamic analysis of the natural fiber (Coir) reinforce polyester composite material with mechanical properties. Materials Today: Proceedings, 69. pp. 1292-1299. ISSN 22147853

Sankar Subramanian, Lakshmi and Ganesan, S. and Venkatesan, S.P. and karthikayan, S. and Muniappan, P. and Pugazhenthi, R. (2022) Experimental analysis of VCR diesel engine exhaust emissions with zirconium dioxide and basalt based catalytic converter using lemon grass oil. Materials Today: Proceedings, 60. pp. 1949-1958. ISSN 22147853

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Rathinam, V. and Nagireddy, Madhavi (2022) Experimentally exploring nano-fluid of alumina nano-particles enriched waste coconut oil effects in cutting zone temperature reduction in motor shaft manufacturing process. Materials Today: Proceedings, 64. pp. 744-748. ISSN 22147853

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Karunakaran, K. and Venkateswar Reddy, M. (2022) Experimentally investigating cutting force reduction performance by nano-alumina particles enriched waste coconut oil Nano fluid in electric motor shaft manufacturing. Materials Today: Proceedings, 64. pp. 765-770. ISSN 22147853

Kalyana Chakravarthy, P. R. and Ilango, T. and Pugazhenthi, R. (2022) Mechanical properties of concrete with foundry sand andcoconut shell as partial replacement for coarse and fine aggregate. Materials Today: Proceedings, 52. pp. 537-543. ISSN 22147853

Anbuchezhiyan, G. and Saravanan, R. and Pugazhenthi, R. and Rathinam, V. and Nagireddy, Madhavi (2022) Reconnoitering the influence of nanofluid of Nano- alumina particles enriched waste coconut oil in Machining SAE 1045 shaft on modification Surface finish. Materials Today: Proceedings, 64. pp. 661-666. ISSN 22147853

Sathishkumar, G. and Sridhar, R. and Gokul, T. and Pugazhenthi, R. (2022) Study and compare the mechanical properties of bio fiber reinforced composites. Materials Today: Proceedings, 68. pp. 1429-1436. ISSN 22147853

Abhishek Krishna Sai, A. and Chandrasekaran, M. and Vinod Kumar, T. and Pugazhenthi, R. (2022) Study the enhanced mechanical properties of Al/B4C metal matrix composite. Materials Today: Proceedings, 68. pp. 1422-1428. ISSN 22147853

Sreeram, D. and Pugazhenthi, R. and Anbuchezhiyan, G. and Saravanan, R. and Veeranjaneyulu, K. (2022) An investigation of the effects of hot rolling on the microstructure and mechanical behavior of nano-sized SiC particulates reinforced Al6063 alloy composites. Materials Today: Proceedings, 64. pp. 731-736. ISSN 22147853

Pugazhenthi, R. and Sreeram, D. and Scaria, Clement Tom and Anbuchezhiyan, G. and Nanthakumar, P. (2021) Effect of process parameters on machining of Al -TiC metal matrix composites using RSM. Materials Today: Proceedings, 46. pp. 3282-3287. ISSN 22147853

Jayakanth, J.J. and Chandrasekaran, M. and Pugazhenthi, R. (2021) Impulse excitation analysis of material defects in ball bearing. Materials Today: Proceedings, 39. pp. 717-724. ISSN 22147853

Gnanavel, C. and Saravanan, R. and Gopalakrishnan, T. and Pugazhenthi, R. (2021) Fracture toughness reinforcement by CNT on G/E/C hybrid composite. Materials Today: Proceedings, 37. pp. 1046-1050. ISSN 22147853

Girimurugan, R. and Pugazhenthi, R. and Suresh, T. and Maheskumar, Pon. and Vairavel, M. (2021) Prediction of mechanical properties of hybrid aluminium composites. Materials Today: Proceedings, 39. pp. 712-716. ISSN 22147853

Poornachandiran, N. and Pugazhenthi, R. and Vijay Ananth, S.S. and Krishnan, T. Gopala and Vairavel, M. (2021) Investigation of mechanical properties of Al6061 with reinforcement of SiC/B4C metal matrix composites. Investigation of Mechanical Properties of Al6061 with Reinforcement of SiC/B4C Metal Matrix Composites. 020113.

Kumar, S.D. and Pugazhenthi, R. and Ajith Arul Danial, S. and Swaminathan, G. (2021) Optimization of Dissimilar aluminum alloy by Friction stir welding Process Control variables with Multiple Objectives. Journal of Physics: Conference Series, 2040 (1). 012042. ISSN 1742-6588

Anbuchezhiyan, G. and Mohan, B. and Senthilkumar, N. and Pugazhenthi, R. (2021) Synthesis and Characterization of Silicon Nitride Reinforced Al–Mg–Zn Alloy Composites. Metals and Materials International, 27 (8). pp. 3058-3069. ISSN 1598-9623

Ramasamy, Muthukumaran and Ajith Arul Daniel, S. and Nithya, M. and Sathees Kumar, S. and Pugazhenthi, R. (2021) Characterization of natural – Synthetic fiber reinforced epoxy based composite – Hybridization of kenaf fiber and kevlar fiber. Materials Today: Proceedings, 37. pp. 1699-1705. ISSN 22147853

Ravuri, Manu and Pugazhenthi, R. (2021) The effect of sintering temperature on components prepared by Cu powder mixed with binder. The Effect of Sintering Temperature on Components Prepared by Cu Powder Mixed with Binder. 020111.

Eriki Ananda, Kumar and Pugazhenthi, R. and Chandrasekaran, M. (2021) Comparison in surface roughness of Ti6Al4v using CBN & bondless tool with the operations of turning and grinding. Comparison in surface roughness of Ti6Al4v using CBN & bondless tool with the operations of turning and grinding. 020110.

Girimurugan, R. and Pugazhenthi, R. and Maheskumar, Pon. and Suresh, T. and Vairavel, M. (2021) Impact and hardness behaviour of epoxy resin matrix composites reinforced with banana fiber/camellia sinensis particles. Materials Today: Proceedings, 39. pp. 373-377. ISSN 22147853

Thendral Selvam, P. and Pugazhenthi, R. and Dhanasekaran, C and Chandrasekaran, M. and Sivaganesan, S. (2021) Experimental Investigation on the Frictional Wear Behaviour of TiAlN Coated Brake Pads. Materials Today: Proceedings, 37. pp. 2419-2426. ISSN 22147853

Clement, Tom Scaria and Pugazhenthi, R. (2021) Effect of process parameter on synthesizing of TiC reinforced Al7075 aluminium alloy nano composites. Materials Today: Proceedings, 37. pp. 1978-1981. ISSN 22147853

Jayakanth, J.J. and Mamidi, Vamsi Krishna and Pugazhenthi, R. and Anbuchezhiyan, G. and Ponshanmugakumar, A. (2021) An investigation on wear properties of SiC/WC strengthened aluminium alloy hybrid composites. Materials Today: Proceedings, 46. pp. 3542-3545. ISSN 22147853

Mamidi, Vamsi Krishna and Pugazhenthi, R. and Manikandan, G. and Vinoth Kumar, M. (2020) Mechanical and microscopic study on Tinospora cordifolia and Tectona grandis composites. Materials Today: Proceedings, 22. pp. 772-775. ISSN 22147853

Ajith Arul Daniel, S. and Kumar, R. and Vijayananth, S. and Pugazhenthi, R. and UNSPECIFIED1 (2020) Multi-objective optimization of drilling of Al5059-SiC-2%MoS2 composites using NSGA-II. Materials Today: Proceedings, 22. pp. 853-857. ISSN 22147853

Rajasekaran, A. and Pugazhenthi, R. (2020) Study of mechanical properties of stir casted Al7075/SiCp composites after thermomechanical treatment. Materials Today: Proceedings, 22. pp. 766-771. ISSN 22147853

Pugazhenthi, R. and Sreeram, D. and Vijay Ananth, S.S. and Devaraju, A. (2020) Surface fracture analysis of stir casted AA 6063/TiC/Gr hybrid composites under different solidification rate. Materials Today: Proceedings, 22. pp. 701-704. ISSN 22147853

Sai Virinchy, Chintala and Jayakumar, V. and Hafeez Asif, Abdul and Pugazhenthi, R. (2019) Experimental Investigation of Al-Mg-SiC-Fly Ash Composites for Automotive Alloy Wheel Rims. International Journal of Vehicle Structures and Systems, 11 (2). ISSN 0975-3060

Pugazhenthi, R. and Sivaganesan, S. and Dhansekaran, C. and Parthiban, A. (2019) Morphological and Mechanical Characteristics of Hybrid Aluminium Matrix Composites. International Journal of Vehicle Structures and Systems, 11 (2). ISSN 0975-3060

Ajith Arul Daniel, S. and Pugazhenthi, R. and Kumar, R. and Vijayananth, S. (2019) Multi objective prediction and optimization of control parameters in the milling of aluminium hybrid metal matrix composites using ANN and Taguchi -grey relational analysis. Defence Technology, 15 (4). pp. 545-556. ISSN 22149147

Vivek, P. and Saravanan, R. and Chandrasekaran, M. and Pugazhenthi, R. and Vinod Kumar, T. (2018) A HEURISTIC FOR BATCH SCHEDULING WITH UNIFORM AND NON UNIFORM LOT SIZES IN TWO STAGE HYBRID FLOWSHOP. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 97-104. ISSN 0976-6340

Vivek, P. and Saravanan, R. and Chandrasekaran, M. and Pugazhenthi, R. and Vinod Kumar, T. (2018) HEURISTIC FOR CRITICAL MACHINE ORIENTED BATCH SCHEDULING IN TWOSTAGE HYBRID FLOW SHOP. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 120-130. ISSN 0976-6359

Variavel, M and Pugazhenthi, R. and Jayakumar, V. (2018) Experimentation and simulation process of friction stir welding for lightweight similar and dissimilar materials. MATEC Web of Conferences, 172. 04002. ISSN 2261-236X

Sivabalan, S. and Sathishkumar, G. and Pugazhenthi, R. and Eriki Ananda, k (2018) Characterization of Multilayer Nano-coating of Piston Ring. International Journal of Pure and Applied Mathematics, 118 (20). pp. 137-144. ISSN 1314-3395

Karikalan, L. and Sivaganesan, S. and Ruban, M. and Pugazhenthi, R. (2018) Design and Analysis of Puncture Disc Pressure Vessel. International Journal of Management, Technology And Engineering, 8 (12). ISSN 2249-7455

Ajith Arul Daniel, S. and Vijayananth, S. and Pugazhenthi, R. and Muthuraman, R.K. (2018) IMPACT ANALYSIS OF INSAS RIFLE BULLET AGAINST THE VEHICLE ALUMINIUM COMPOSITE ARMOUR PLATE USING LS-DYNA. International Journal of Mechanical Engineering and Technology (IJMET), 9 (11).

Gnanavel, C. and Saravanan, R. and Chandrasekaran, M. and Pugazhenthi, R. (2017) Case Study of Cycle Time Reduction by Mechanization in Manufacturing Environment. IOP Conference Series: Materials Science and Engineering, 183. 012023. ISSN 1757-8981

Pugazhenthi, R. and Chandrasekaran, M. and Muthuraman, R K and Vivek, Pazhamalai and Parthiban, A. (2017) A Comparative Characteristic Study of Jatropha and Cardanol Biodiesel Blends. IOP Conference Series: Materials Science and Engineering, 183. 012038. ISSN 1757-8981

Vivek, P. and Saravanan, R. and Chandrasekaran, M. and Pugazhenthi, R. (2017) Critical Machine Based Scheduling -A Review. IOP Conference Series: Materials Science and Engineering, 183. 012027. ISSN 1757-8981

Rajasekar, K and Pugazhenthi, R. and Selvaraju, A and Manikandan, T and Saravanan, R (2017) Effect on air quality and flow rate of fresh water production in humidification and dehumidification system. IOP Conference Series: Materials Science and Engineering, 183. 012032. ISSN 1757-8981

Parthiban, A. and Pugazhenthi, R. and Ravikumar, R and Vivek, Pazhamalai (2017) Experimental Investigation of Turning Parameters on AA 6061-T6 Material. IOP Conference Series: Materials Science and Engineering, 183. 012013. ISSN 1757-8981

Vivek, P. and Saravanan, R. and Chandrasekaran, M. and Pugazhenthi, R. (2017) Heuristic for Critical Machine Based a Lot Streaming for Two-Stage Hybrid Production Environment. IOP Conference Series: Materials Science and Engineering, 183. 012030. ISSN 1757-8981

Ruban, M. and Ramasubramanian, S. and Pugazhenthi, R. and Sivaganesan, S. (2017) Investigation of Performance Analysis and Emission Characteristics of Waste Plastic Fuel. IOP Conference Series: Materials Science and Engineering, 183. 012037. ISSN 1757-8981

Gnanavel, C. and Saravanan, R and Chandrasekaran, M. and Pugazhenthi, R. (2017) Restructured review on Electrical Discharge Machining - A state of the art. IOP Conference Series: Materials Science and Engineering, 183. 012015. ISSN 1757-8981

Saravanan, R. and Pugazhenthi, R. and Gopalakrishnan, T. (2015) Experimental Investigation of EN-31 Steel Surface Grinding Performance with Al<SUB>2</SUB>O<SUB>3</SUB> and CuO Nano Fluids. Journal of Advanced Microscopy Research, 10 (4). pp. 284-291. ISSN 21567573

Book Section

Sivabalan, S. and Sridhar, R. and Pugazhenthi, R. and Eriki Ananda, Kumar and Sathishkumar, G. (2022) Bird Impact Analysis of a Typical Transport Aircraft Wing. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 507-521.

Balamurali, P. and Karthikeyan, S. and Anbuchezhiyan, G. and Pugazhenthi, R. (2022) Experimental Investigation and Optimization of Cryogenically Treated Titanium Grade-2 Alloy in Electrical Discharge Machining. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 107-119.

Aswin Kumar, S. and Gnanavel, C. and Pugazhenthi, R. and Baradeswaran, A. (2022) Experimental Investigation of Polymers Gears to the Composite Gears. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 1013-1027.

Maheshwaran, R. and Dhanasekaran, C. and Sivaganesan, S. and Pugazhenthi, R. (2022) Investigation of Mechanical Behavior of Biodegradable Natural Composite PLA Reinforced with Snake Grass Fiber and Sisal Fiber. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 165-173.

Palanivel, S. and Gopalakrishnan, T. and Pugazhenthi, R. (2022) Numerical Simulation on Fluidic Oscillator by Supersonic Flow Mechanism. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 1139-1155.

Kamalakannan, K. and Sivaganesan, S. and Dhanasekaran, C. and Pugazhenthi, R. (2022) A Study on the Mechanical Properties of Alkali Treated Natural Reinforced Fiber Composites. In: Recent Advances in Materials and Modern Manufacturing. Springer, pp. 673-682.

Vijayananth, S. and Ajith Arul Daniel, S. and Muthuraman, R K and Pugazhenthi, R. (2018) ANALYSIS OF MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS IN WEDM OF AL/SIC/MOS2. In: International Journal of Mechanical Engineering and Technology (IJMET). IJMET.

Conference or Workshop Item

Maruthapandian, M. and Pugazhenthi, R. (2024) Optimization of the micro plasma arc welding and tipping process of exhaust valve. In: INTERNATIONAL CONFERENCE ON MATHEMATICAL ANALYSIS AND ITS APPLICATIONS 2022 (IConMAA 2022): Analysis, Uncertainty, and Optimization, 14–16 October 2023, Medan, Indoensia.

Vemanaboina, Harinadh and Ananda, K. Eriki and Majid, M. S. Abdul and Naidu, B. Vishnu Vardhana and Pugazhenthi, R. (2023) Influence of pre-heating technique on the titanium alloy for machinability using mill insert. In: INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS SCIENCE, STRUCTURES, AND MANUFACTURING, 27–28 May 2022, Chittoor, India.

Raja S., Joseph Irudaya and Sivaganesan, S. and Pugazhenthi, R. (2022) Fractural behaviour analysis of areca nut fiber reinforced with epoxy resin. In: THIRD VIRTUAL INTERNATIONAL CONFERENCE ON MATERIALS, MANUFACTURING AND NANOTECHNOLOGY, 29 June 2021, Ariyalur, India.

Ganesh, K. and Ajith Arul Daniel, S. and Pugazhenthi, R. and Balamurali, P. (2021) Study the evaluation of underactuated robotic gripper. In: RECENT TRENDS IN MANUFACTURING TECHNOLOGIES, MATERIALS PROCESSING, AND TESTING, 18–19 February 2021, Chennai, India.