Items where Author is "Muthuraman, V."

Ruban, M. and Vijayaraj, S. and Soundarya, M K and Sridhar, R. and Baskar, S. and Karunakaran, K. and Gopalakrishnan, T. and Ajith Arul Daniel, S. and Gnanavel, C. and Muthuraman, V. (2026) Industry 4.0 and the Rise of Artificial Intelligence in Production: Artificial Intelligence in Production. Amazon Kindle.

Subash, P. and Gurusamy, P. and Muthuraman, V. and Vijayan, S. (2026) Characterization study on mechanical, thermal conductivity and water absorption properties of silane-modified Plumbago zeylanica stem fiber and wheat straw extracted biosilica particle reinforced polyester composite. Polymer Bulletin, 83 (6). ISSN 0170-0839

Karthikeyan, K. and GURUSAMY, P. and Muthuraman, V. and Vijayan, S. (2026) Development of biocomposites using alkali-silane modified cellulosic fiber from papaya leaf stem and chitin biopolymer-reinforced vinyl ester. Polymer Bulletin, 83 (2). ISSN 0170-0839

Sul, Ramesh Dnyandeo and Kundlik, Nitin and Sharma, Aman and Muthuraman, V. and Kumar, Sendil and Nagarajan, Nagabhooshanam and Naidu, BEVL and Ramkumar, M. C. and Thirugnanasambandham, T. (2026) Featuring of polyethylenimine modifier and characteristics investigations of hybrid perovskite solar cell with tin oxide electron transport layer. Pure and Applied Chemistry. ISSN 0033-4545

GURUSAMY, P. and KUMAR, J. LOKESH and GAYATHRI, N. and Muthuraman, V. (2025) PRODUCTION AND CHARACTERIZATION OF AA 7075 METAL MATRIX COMPOSITES REINFORCED WITH RED MATTA RICE HUSK BIOSILICA. Surface Review and Letters. ISSN 0218-625X

Vinod Kumar, T. and Muraliraja, R. and Ajith Arul Daniel, S. and Gnanavel, C. and Muthuraman, V. (2025) Applications of Nano-Coating in Mechanical Systems: Improving Wear, Corrosion, and Performance. In: Emerging Trends in Multidisciplinary Engineering: A Comprehensive Overview,. SCIENTIFIC RESEARCH REPORTS, pp. 101-125. ISBN 978-81-9840066-6

Sul, Ramesh Dnyandeo and Kundlik, Nitin and Sharma, Aman and Muthuraman, V. and Kumar, Sendil and Nagarajan, Nagabhooshanam and Naidu, BEVL and Maranan, Ramya and Thirugnanasambandham, T. (2025) Enrichment of Surface Morphology and Mechanical Behaviour of Magnesium Alloy Composite Made With Hybrid Reinforcements Via Vacuum-Aided Stir Cast Process. International Journal of Metalcasting. ISSN 1939-5981

Lokesh Kumar, J. and GURUSAMY, P. and Gayathri, N. and Muthuraman, V. (2024) Influence of graphene nanoplates and titanium diboride particulate on wear and interfacial bonding properties of sintered aluminium alloy composites. Diamond and Related Materials, 144. p. 111035. ISSN 09259635

Maridurai, T. and Muthuraman, V. and Gurusamy, P. and Thirugnanam, S. (2024) Enhancement of Mechanical and Water Resistance Characteristics of Pineapple Fiber Polymer Composites through Nano SiC Reinforcement. In: Advances in Additive Manufacturing Technologies. Taylor & Francis Group,, pp. 150-155. ISBN 978-1-032-90013-1

Arulandu, V. Noble and Muthuraman, V. and Dhanasekaran, C. and Chandrasekaran, M. (2024) Experimental Comparison of Mechanical Stability and Morphology Between Tree Fibres and Shrub Fibres Reinforced Epoxy Bio-Composites. In: Advances in Additive Manufacturing Technologies. Taylor & Francis Group,, pp. 156-160. ISBN 978-1-032-90013-1

Padmanabhan, S. and Vinod Kumar, T. and Muthuraman, V. and Kumar, D. Sendil and Reddy, Mulinti Navneeth and Teja, T. Adi Sesha Sai (2024) Investigation and Parametric Optimization of Abrasive Water Jet Machining of AA7075 Through Response Surface Methodology. In: Smart Materials and Manufacturing Technologies for Sustainable Development. Springer, pp. 135-142.

Arunkumar, S. and Chandrasekaran, M. and Muthuraman, V. and Vinod Kumar, T. (2024) Optimization of Stirrer Speed on the Mechanical Properties of Aluminium Graphite Stir Cast Composite. In: Recent Developments in Mechanical Science and Automotive Technology. 978-81-9807923-7 ed. SCIENTIFIC RESEARCH REPORTS.

Arunkumar, S. and Muthuraman, V. and Vinod Kumar, T. and Muraliraja, R. (2024) Optimization of the Machining Parameter of Lm6 Aluminum Alloy in CNC Turning Using Neural Network. In: Emerging Technologies in Automotive and Mechanical Sciences. 978-81-9704204-1 ed. SCIENTIFIC RESEARCH REPORTS.

Gurusamy, P. and Raj, S. Hari Krishna and Muthuraman, V. and Kingsly, J. Joshua and Subash, V. and Ram, K. Shri Gokum and Srinivasan, D. (2024) Production and mechanical properties of aluminium – Copper alloy reinforced with Al2O3 metal matrix composites. In: INTERNATIONAL CONFERENCE ON MATHEMATICAL ANALYSIS AND ITS APPLICATIONS 2022 (IConMAA 2022): Analysis, Uncertainty, and Optimization, 14–16 October 2023, Medan, Indoensia.

Arunkumar, S. and Sriraman, N. and Muraliraja, R. and Vinod Kumar, T. and Muthuraman, V. (2023) Performance evolution in machining parameter of Al-Si (LM6) alloy using neural network. Materials Today: Proceedings. ISSN 22147853

Ali, Zeeshan and Muthuraman, V. and Rathnakumar, P. and Gurusamy, P. and Nagaral, Madeva (2023) Influence of B4C particle size on the mechanical behavior of A356 aluminium composites. Research on Engineering Structures and Materials. ISSN 21489807

GURUSAMY, P. and Muthuraman, V. and Hari Krishna Raj, S. and Lokesh Kumar, J. (2022) Performance and Experimental Analysis of Al-Al2O3 Metal Matrix Composites. International Journal of Vehicle Structures and Systems, 14 (2). ISSN 0975-3060

GURUSAMY, P. and Muthuraman, V. and Lokeshkumar, J. and Hari Krishna Raj, S. (2022) Fabrication and Mechanical Behaviour of Al-6061/Al2O3 Metal Matrix Composite Fabricated Through Powder Metallurgy Technique. International Journal of Vehicle Structures and Systems, 14 (1). ISSN 0975-3060

Saravanan, R. and Karuppasamy, M. and Chandrasekaran, M. and Muthuraman, V. (2021) Heat Transfer Effect of CNT and Ethylene Glycol Based Nano-Fluid in Twisted Tape Heat Exchanger with Balls. International Journal of Vehicle Structures and Systems, 12 (4). ISSN 0975-3060

Arunkumar, S. and Dhanasekaran, C and Muthuraman, V. and Vinod Kumar, T. (2021) Modelling and stress analysis of shaft used in hydraulic streeing pump. Materials Today: Proceedings, 37. pp. 2474-2477. ISSN 22147853

Gurusamy, P. and Prabu, S. Balasivanandha and Nagasankar, P. and Muthuraman, V. and Mohanavel, V. (2021) Solidification behaviour of squeeze cast aluminium composites. Solidification behaviour of squeeze cast aluminium composites. 020028.

Arunkumar, S. and Chandrasekaran, M. and Muthuraman, V. and Vinod Kumar, T. (2021) Study properties and mechanical behavior of the shaft material 16MnCr5. Materials Today: Proceedings, 37. pp. 2458-2461. ISSN 22147853

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) CFD Analysis of Twisted Tape Heat Exchanger with Twist Ratio of 3 in Metallic and Ceramic Nano Fluids. International Journal of Vehicle Structures and Systems, 12 (3). ISSN 0975-3060

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) Heat Transfer Amplification through Special Tube Inserts and Metallic Nanofluids in Heat Exchanger. International Journal of Vehicle Structures and Systems, 11 (4). ISSN 0975-3060

Karuppasamy, M. and Saravanan, R. and Chandrasekaran, M. and Muthuraman, V. (2020) Numerical exploration of heat transfer in a heat exchanger tube with cone shape inserts and Al2O3 and CuO nanofluids. Materials Today: Proceedings, 21. pp. 940-947. ISSN 22147853

Muthuraman, V. and Karunakaran, K and Arunkumar, S. (2018) Performance comparison of various Dry,Paraffin and conventional coolants in turning 6082 Aluminium alloy. International Journal of Management, Technology And Engineering, 8 (12). pp. 4607-4610. ISSN 2249-7455

Parthiban, A. and Chandrasekaran, M. and Muthuraman, V. and Sathish, S. (2018) Optimization of CO2 Laser Cutting of Stainless Steel Sheet for Curved Profile. Materials Today: Proceedings, 5 (6). pp. 14531-14538. ISSN 22147853

Arunkumar, S. and Chandrasekaran, M. and Vinod Kumar, T. and Muthuraman, V. (2018) Properties and behavior of squeeze pressure on aluminum molybdenum DI-supplied composite. International Journal of Engineering & Technology, 7 (2).

Arunkumar, S. and Baskaralal, V P M and Muthuraman, V. (2017) Comparative Investigation on Modal analysis of LM25 Aluminium alloy with other Aluminim alloys using Finite element analysis software. IOP Conference Series: Materials Science and Engineering, 183. 012011. ISSN 1757-8981

Venugopal, S and Chandresekaran, M and Muthuraman, V. and Sathish, S (2017) Computational Fluid Dynamics Analysis of Nozzle in Abrasive Water Jet Machining. IOP Conference Series: Materials Science and Engineering, 183. 012021. ISSN 1757-8981

Muthuraman, V. and Arunkumar, S. (2017) Experimental evaluation of machining parameters in machining of 7075 aluminium alloy with cryogenic liquid nitrogen coolant. IOP Conference Series: Materials Science and Engineering, 183. 012012. ISSN 1757-8981

Arunkumar, S. and Muthuraman, V. and Baskaralal, V P M (2017) Optimization of the Machining parameter of LM6 Alminium alloy in CNC Turning using Taguchi method. IOP Conference Series: Materials Science and Engineering, 183. 012024. ISSN 1757-8981

Manimaran, A. and Muthuraman, V. (2017) Interaction between tolerance levels of people and adoption of green supply chain management practices: an empirical case study in the domestic appliances industry. International Journal of Environment, Workplace and Employment, 4 (3). p. 205. ISSN 1741-8437

Muthuraman, V. and Arunkumar, S. and Baskarlal, V. P. M. (2017) MODELLING AND SIMULATION ANALYSIS OF METAL CASTINGS. MODELLING AND SIMULATION ANALYSIS OF METAL CASTINGS.